Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Frisco
Gate parts and welding in Frisco usually cost between $225 and $1,400 depending on whether you need a hinge replaced, a post re-set, or custom welding on ornamental iron. Most hinge and latch work we finish in one trip, often same day. If your gate sags, the problem is almost never the panel itself – it’s the post or the hinge, and that’s where we start. Call (979) 291-0947 and a live person answers, day or night.
You live in a city that grew faster than almost anywhere in Texas, and that matters for your gate. The neighborhoods along Eldorado Parkway, Stonebrook Parkway, and Legacy Drive weren’t built one at a time – they were built in waves, hundreds of homes at a stretch, often with the same two or three gate operator models throughout the whole subdivision. When those gates start failing, they fail together. We’ve spent years mapping build-year-to-model correlations across Frisco so our guys roll up to your street already knowing what’s behind the control board cover.
Hal Gatewood has been fixing gates since 2001. He’s the name on the shop, the one who shows up with the welder, and the one who stands behind the 90-Day Done Right Promise stamped on every job. Not a franchise. Not a call center. A person with a published address and a phone that rings to him.
Why Gatewood Fence & Gate Is Frisco’s Preferred Gate Parts & Welding Company
We’ve done gate work in Frisco long enough to know which HOA in Starwood wants powder-coat black and which section of Phillips Creek Ranch specifies a specific picket profile. That’s not trivia – it’s the difference between a repair that passes architectural review the first time and one that bounces back for rework. Our Gate Parts & Welding team welds finish-matched hinges, latches, and rail repairs so your gate looks like it did the day the builder put it in.
When a homeowner off Teel Parkway calls about a swing gate that won’t catch, Hal doesn’t guess. The black clay that runs under Frisco heaves every time North Texas cycles through drought and rain, and that heave cracks concrete footings and throws post alignment out of spec. We find the real culprit, fix it, and weld it so it stays fixed. A gate sags in the hinge post, not in the middle – and that is where we start.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print. And every call to (979) 291-0947 is answered by a live person, 24/7 – not a voicemail, not a chatbot.
Our Gate Parts & Welding Services in Frisco
Hinge Replacement
Frisco’s ornamental iron gates hang on hinges that take a beating from Collin County’s shrink-swell soil cycles. A hinge that was plumb in 2008 is fighting the frame by 2024. We cut out the old hinge, weld in a heavier-gauge replacement, and match the finish to your existing gate. In neighborhoods like The Lakes of Frisco where HOA committees review every change, that finish match is non-negotiable.
Post Replacement
This is the repair most people don’t know they need. When black clay heaves, it cracks the concrete around the hinge post, and once the post moves, no amount of hinge tightening will fix the sag. We pull the old post, re-pour the footing deeper, and weld the hinges back in true. If you skip the post and just replace hinges, you’ll fix the same gate twice.
Rail Repair
The horizontal rails on a double-swing gate carry all the tension from the pickets. In Frisco’s newer construction, builders sometimes used lighter-gauge rail than the gate needs, and over 15 to 20 years those rails fatigue and crack at the weld points. We weld in new rail sections, gusset the weak spots, and restore the gate’s rigidity without replacing the whole panel.
Custom Welding
Whether you need a hinge fabricated to match an HOA spec, a latch re-engineered for a sagging frame, or mounting hardware for a new operator on an acreage entrance north of Frisco, we weld on site. The gate stays in your driveway. You see the work being done. And if the design has to pass architectural review, we match picket style, color, and hardware finish to the original.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We’re certified on nine major gate brands, and in Frisco that matters because builders in the 2005 through 2012 subdivisions spec’d the same few models over and over. We stock control boards, drive gears, and limit switches for LiftMaster and Mighty Mule units commonly found across West Frisco and the newer sections off Main Street. We also service FAAC and BFT operators on the higher-end estate gates north of town. When your opener fails, we usually have the part on the truck – not on order.
Common Gate Parts & Welding Problems We See in Frisco Homes
- Post footing heave from black clay: Collin County soil expands and contracts through drought and rain cycles, cracking the concrete around hinge posts. The gate starts sagging, the latch misses, and the problem gets blamed on the panel. The post is the problem.
- Ice storm damage to operators: Frisco’s northern Collin County location catches more ice than southern DFW suburbs. Frozen gearboxes seize, and plastic limit-switch housings crack on older LiftMaster and BFT units. Spring thaw is our busiest time for opener service calls in neighborhoods like Panther Creek and Lone Star Ranch.
- HOA-driven custom work: Starwood, Phillips Creek Ranch, and The Lakes of Frisco all have architectural review committees that govern gate color, picket style, and hardware. An off-the-shelf hinge or latch that doesn’t match the original will bounce back. We weld finish-matched parts the first time.
- Rack and pinion wear on slide gates: In Frisco’s 2006-era neighborhoods, slide gates got spec’d heavily, and after 15-plus years the rack teeth strip and the pinion gear skips. You don’t always need a new operator – we can weld in a new rack section and replace the pinion for a fraction of the cost.
Pricing for Gate Parts & Welding in Frisco, TX
Here’s what you can expect for gate parts and welding work in Frisco:
- Hinge replacement: $225 to $450 per hinge, including finish-matched welding and labor. Heavy-gauge ornamental hinges run higher.
- Post replacement: $500 to $1,200 depending on post size, footing depth, and whether we’re matching stone or brick column work.
- Rail repair welding: $300 to $700 for crack repair and gusseting on a typical double-swing gate.
- Custom welding fabrication: $150 to $400 per fabricated component, depending on complexity and finish matching.
- Rack and pinion replacement: $400 to $900 including new rack section, pinion gear, and alignment.
The price Hal quotes you is the price on the invoice. We agree on the number before any work starts, and nobody shows up with a “revised estimate” at the door. You also get $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans get 10% off, every job, permanently. Call (979) 291-0947 for an exact quote – the estimate is free.
We Also Serve Cities Near Frisco
We work all over the Frisco area, and we’re just as close to the acreage gates in Prosper and Celina as we are to the master-planned neighborhoods in Little Elm and Aubrey. Whether you’re in a Starwood HOA or on five acres north of Highway 380, Frisco is where we do some of our most involved custom welding and post resets, and if you’re nearby, we’ll be there fast.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Frisco
Because the hinges were never the real problem. In Frisco, the black clay under your gate post heaves and shrinks with rain and drought cycles, cracking the footing and letting the post lean. No hinge replacement will hold if the post is moving. We pull the post, re-pour the footing, and weld the hinges back in true – that’s the repair that lasts. Call (979) 291-0947 and we’ll take a look for free.
Yes, and this is a big part of what we do in Frisco. Starwood, Phillips Creek Ranch, The Lakes of Frisco, and most other HOA-governed neighborhoods here have specific finish colors, picket profiles, and hardware styles on file. We match the weld, the finish, and the hardware to the original spec so your repair passes architectural review without rework. Bring us your HOA’s spec sheet and we’ll handle the rest.
Usually not. A stripped rack and pinion on a slide gate means the rack teeth wore down and the pinion gear started skipping. We can weld in a new rack section, replace the pinion gear, and re-align the drive for $400 to $900 – far less than a full operator replacement. We’d only recommend a new operator if the motor itself is failing. Call (979) 291-0947 for an honest assessment with no upsell.
Frisco catches more ice than most of the DFW metro, and when freezing rain hits, water gets into the operator gearbox and seizes it. The plastic limit-switch housings on older LiftMaster and BFT units can also crack in the freeze. We replace the seized gear set or the cracked housing and have your gate running again – and we arrive with the right parts because we know which operators went into Frisco’s build-year neighborhoods. Call us and a live person answers, day or night.
Yes. For the larger properties north of town near Prosper and Celina, we weld custom mounting plates and post brackets on-site for solar gate openers, including Mighty Mule and Ghost Controls systems. We’ll also size the panel and battery box to your gate’s weight and cycle count so it works through North Texas heat and winter ice. Call (979) 291-0947 for a free measure and a written price before we start.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Frisco since 2001.