Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Prosper
Gate parts and welding in Prosper, TX usually means a gate that has stopped closing or a hinge that has torn loose, and most of the time the real problem sits underground. Prosper’s Blackland Prairie clay expands and contracts hard enough to tilt a gate post out of plumb within three to five years of the original pour. That means the hinge replacement or the weld repair you think you need often has a footing problem underneath it. Hal Gatewood and his crew have been fixing exactly this since 2001. Call (979) 291-0947 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Prosper’s Preferred Gate Parts & Welding Company
We are not a national brand with a rotating crew. Gatewood Fence & Gate is locally owned and owner-operated, and we work across Prosper’s master-planned neighborhoods regularly. Hal knows the streets in Star Trail, the lot lines in Whitley Place, and the entry gates at Lakes of La Cima. He has been at this since 2001, and his name is on the shop and on every invoice. Prosper homeowners who have already been burned by a company that quoted one price on the phone and charged another at the door tend to stick with us once they see how we work. There is a published address and license number you can look up. There is a person behind that phone number.
Our Gate Parts & Welding work in Prosper gets done on site. We weld in your driveway, not in some shop across the county. Hal will come out and look you in the eye, tell you what is actually wrong, and quote a price before any work starts. The price you are quoted is the price you pay. No surprises at the door.
Every job carries a 90-Day Done Right Promise, in writing. If it is not done right, we come back and make it right. One call.
Our Gate Parts & Welding Services in Prosper
Hinge Replacement
Hinges on heavy ornamental gates in Prosper carry more load than most people realize. A gate that swings on a post that has shifted in clay soil puts constant lateral pressure on the hinge barrels and the welds that hold them. We see hinge barrels wallowed out, hinge pins bent, and top hinges pulling screws out of posts that have started leaning. We replace hinges with heavy-duty units rated for the actual weight of the gate, then weld or bolt them so they stay. If the post itself has moved, we fix that first. A hinge on a moving post is a hinge you will replace twice.
Post Replacement
This is the service we emphasize more in Prosper than almost anywhere else we work. The Blackland Prairie clay under Prosper heaves and shrinks with every wet and dry cycle. Many posts poured during the 2010s building boom went in at depths that looked fine on paper but sit too shallow to clear the active soil zone. Within three to five years, those posts visibly tilt. A gate that “just won’t close right” in Prosper is often a post that has moved two inches out of plumb. We cut out the old footing, drill deeper, and re-pour so the new post sits below the movement zone. Then the gate gets re-hung and the operator re-calibrated. Do it once, not twice.
Rail Repair
Rails on Prosper’s ornamental and custom iron gates take a beating from hail, wind, and the constant flex that comes from clay-driven post movement. A rail that has cracked at the weld or bowed in the middle will throw the whole gate out of square. We straighten, reinforce, and re-weld rails on site. Where a rail has rusted through, we cut and weld in a new section and repaint to match. The repair happens in your driveway, on your gate, the same day we come out.
Custom Welding
Prosper has a higher concentration of custom and bespoke gates than almost any community we serve. These are not off-the-shelf gates from a big box store. They were fabricated to match a specific iron fence, a specific driveway width, a specific look. That means a cracked scroll or a broken spear tip cannot just be swapped for a generic part. We weld new pieces in and match the finish. We have repaired cracked hinges, torn operator brackets, bowed rails, and broken decorative elements on custom gates throughout Prosper. The goal is always to keep the original gate, not replace it with something that does not match.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Prosper
We service and carry parts for the operators Prosper homes actually use: LiftMaster, Mighty Mule, FAAC, and BFT, among others. If your LiftMaster swing operator faults continuously because a post tilted, we can reset the post and re-calibrate the operator so it runs on its original rack and pinion. You do not need a new operator just because the geometry underneath it changed. For Prosper customers, we keep common hinges, brackets, and operator parts on the truck so most repair work gets done in one visit, not two or three.
Common Gate Parts & Welding Problems We See in Prosper Homes
- Clay-driven post tilt. Prosper’s expansive clay swells in wet seasons and cracks in drought. Posts poured too shallow during the 2010s boom tilt within three to five years. The gate jams, the operator faults, and hinges tear. The answer is a re-pour below the active soil zone, then re-hang the gate.
- Hail and wind damage to iron panels. North Texas storms dent ornamental iron, knock photocells out of alignment, and kill loop detectors. We straighten panels, re-weld fractured scrollwork, and reset safety sensors so the gate runs safely again.
- Operator brackets torn from moving posts. A post shifting in clay pulls the operator bracket with it. The bracket weld fails, the operator binds, and the gate stops mid-travel. We weld the bracket back and fix the post so it does not happen again next season.
- Safety photocells knocked offline. We replace or realign photocells often after thunderstorm high winds. If a gate reverses for no reason or refuses to close, the first thing we check is photo eye alignment and wiring, then the post, then the operator itself.
Pricing for Gate Parts & Welding in Prosper, TX
Gate parts and welding in Prosper run a range depending on what has actually failed. A hinge replacement on a standard ornamental gate typically runs $180 to $350 per hinge, including the heavy-duty hinge and on-site welding. Post replacement with a deeper footing re-pour runs $600 to $1,400 depending on the post size, gate weight, and how much concrete has to come out. Rail repair and re-welding usually runs $150 to $450 per rail. Custom welding of a cracked scroll or a torn operator bracket runs $120 to $500 depending on the complexity and finish matching. Every quote is in writing before we start. You will not get a surprise invoice at the door. Call (979) 291-0947 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We also serve Prosper and the communities around it. Scheduling is coordinated from our Dallas-Fort Worth office, but the crew that shows up knows Prosper’s streets, her gate styles, and her soil.
We Also Serve Cities Near Prosper
If you are in Frisco, Celina, Little Elm, or McKinney, we cover those areas too. The same crew, the same 90-Day Done Right Promise, the same live person on the phone at (979) 291-0947. We know the soil and the gate styles across this whole corner of North Texas.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Prosper
Most of the time, the gate itself did not fail first. The post underneath it moved. Prosper sits on Blackland Prairie clay that swells and shrinks with moisture cycles, and many original post footings were poured too shallow during the 2010s building boom. Within three to five years, the post tilts, the gate binds, and the operator faults. The fix sequence is post re-pour below the active soil zone, then re-hang the gate, then re-calibrate the operator. Skip the post and you will be back in the same spot next season. Call us at (979) 291-0947 and we will tell you exactly what your gate needs.
In nearly every case, we weld the crack. Full panel replacement is usually only needed if the steel has rusted through and structurally failed across a large section. A crack in a scroll or a rail is a one-visit weld repair. We clean the joint, weld it, and match the finish. We have welded ornamental gates throughout Whitley Place and the rest of Prosper, and the repaired gate keeps its original look. For a quote on your specific gate, call (979) 291-0947.
First we fix the post. A LiftMaster operator mounted on a leaning post will bind, fault, and eventually strip its own gears or tear the bracket. We cut and re-pour the footing, set the post plumb, and then re-mount the operator. In most cases the existing LiftMaster unit works fine once the geometry under it is corrected. We re-calibrate the travel limits and safety sensors and test the gate through full cycles. Call (979) 291-0947 and Hal will tell you if your operator can be saved.
The common signs are a gate that refuses to close, reverses immediately after closing, or stops mid-travel and faults. High winds and hail knock photo eyes out of alignment, snap sensor wires, or crack the lens. If your gate ran fine before a storm and started misbehaving right after it, the photocells are the first thing we check. We realign, rewire, or replace them on site. If you are unsure, call (979) 291-0947 and describe what the gate is doing. We will give you a straight answer.
For heavy ornamental gates, we recommend heavy-duty ball-bearing hinges rated for the actual weight of the gate, not the builder-grade hardware that was originally installed. The gate weight, the post condition, and the swing arc all matter more than the brand name. If the post has started to lean, we fix the post before we hang new hinges. Otherwise you are bolting good hinges to a moving post, and they will fail again. Call (979) 291-0947 for a free estimate and we will spec the right hardware for your gate.
Call Gatewood Fence & Gate for Gate Parts & Welding in Prosper
If your gate is binding, faulting, sagging, or has a weld that let go, call (979) 291-0947. A live person answers. We will schedule a time that works, show up in the window we promised, quote a price before any work starts, and stand behind the job with the 90-Day Done Right Promise in writing. Hal Gatewood has been fixing gates since 2001, and he is not passing through. He is down the road, and his name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Prosper and the surrounding North Texas communities since 2001.