Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Frisco
Gate access control in Frisco usually comes down to one of three jobs: replacing a dead control board in a gate operator that was installed when the neighborhood went up, adding a keypad or video intercom to an existing gate, or getting a solar-powered system running on a long driveway outside city limits. Hal Gatewood has been doing this work since 2001, and his crews know the gates in Starwood, Phillips Creek Ranch, and The Lakes of Frisco well enough to show up with the right part on the truck the first time. If your gate won’t open from the remote or the keypad went dark, call (979) 291-0947 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Frisco’s Preferred Gate Access Control Company
Hal’s name is on the shop and on every invoice. That matters in Frisco, where a lot of the work we get is fixing what a faceless outfit installed or left behind. We publish our address, our license number, and our phone number because we want you to be able to check us out before you let us touch your gate. A live person answers our calls 24/7. Not a voicemail tree, not a call center three states away. When you call about a gate that won’t open on Sunday morning, the person who picks up is someone who can actually help.
We’ve been servicing nine major gate brands since 2001: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our techs are background-checked and uniformed, and every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround.
Frisco grew from a small town to over 200,000 residents in a single generation, and that growth spurt means thousands of gates installed between 2000 and 2020 are now hitting their failure window at the same time. We see it daily. A homeowner in Starwood calls about a keypad that won’t accept a code, and we already know which operator was spec’d on that street in 2007 because we’ve been repairing its siblings for a decade.
Our Gate Access Control Services in Frisco
Our Gate Access Control team handles everything from simple remote reprogramming to full smart access upgrades with video intercoms. Here’s what we do most often in Frisco.
Keypad Entry
Keypads in Frisco neighborhoods take a beating from direct sun and ice. The membrane buttons crack, moisture gets inside, and then the whole board corrodes. We stock replacement keypads and control boards for the common builders’ models, so we can usually swap a dead keypad same-day. If your keypad lights up but won’t accept the code, that’s often a fried relay on the control board, not the keypad itself. We troubleshoot before we start swapping parts that don’t need swapping.
Remote Control
A remote that worked yesterday and doesn’t today is usually one of three things: a dead battery, a blown receiver board, or interference from a neighbor’s new opener. In Frisco’s tight HOA lots, interference is more common than people think. We reprogram, replace receivers, and match new remotes to your operator on the spot. If you’ve lost remotes or bought the house with only one, we set you up with spares.
Phone Entry
Phone entry systems let you buzz someone in from your cell phone, and they’re popular in Frisco for the same reason they’re popular everywhere: nobody carries a gate remote anymore. We install and service cellular-based phone entry units that work on LTE networks, which matters because the old landline-based systems are dying as copper lines get retired. If your phone entry has stopped calling your cell, we can tell you in one visit whether it’s the unit, the network, or the wiring.
Card Reader
Card readers show up on a lot of HOA community entrances and on private driveway gates in the newer subdivisions. We install proximity readers, program cards and fobs, and integrate them with existing operators. In Frisco, HOA architectural review often dictates what hardware can go on a community gate, so we quote what the HOA specs allow rather than what’s cheapest to buy.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Frisco specifically, we see a lot of FAAC and BFT hydraulic operators on the custom estate gates in places like Starwood, plus a heavy concentration of Linear and Viking in the mid-2000s tract subdivisions. Because we know which models were spec’d in which neighborhoods, we stock the corresponding control boards, drive gears, and limit switches on our trucks. When you call us for a dead Linear operator in Phillips Creek Ranch, the tech arriving at your house is already holding the part.
Common Gate Access Control Problems We See in Frisco Homes
- Heaved post footings from black clay soil. Collin County’s expansive black clay shrinks and swells with every drought-and-rain cycle, and that movement racks gate frames and throws latch alignment out of spec. We reset posts and realign before we touch access control, or the new keypad just gets bolted to a crooked post.
- Ice storm damage to control boards and limit switches. February’s ice storms seize operator gearboxes and crack plastic limit-switch housings. We saw it repeatedly this winter: keypads and remotes dead at the board level, not because of wiring but because water found its way in after a freeze-thaw cycle.
- HOA architectural review delays. Nearly every gate repair or replacement in Frisco must clear HOA review, which governs finish color, picket style, and hardware. A control board swap that doesn’t match the original spec means a failed inspection, so we quote what complies from the start.
- Solar power failures on acreage gates. Outside Frisco city limits, long driveways often can’t justify a mains run, so solar is the only option. Cloudy stretches and undersized panels leave batteries drained, and then your keypad won’t even light up. We size panels and batteries properly so the gate works through bad weather.
Pricing for Gate Access Control in Frisco, TX
A keypad replacement in Frisco typically runs $180 to $340, depending on whether we’re just swapping the keypad or also replacing the control board behind it. Remote transmitter programming starts around $75 to $150 per remote. A full phone entry or video intercom installation usually lands between $850 and $1,600, with the spread driven by wire runs and whether you need a cellular module. Solar gate opener packages for acreage properties run $1,200 to $2,600 installed, including panel, battery, and operator. Card reader systems for HOA entrances start around $700 per reader and go up with integration. Every price is quoted and agreed before any work starts. We don’t show up and surprise you with a bigger invoice. You can also take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (979) 291-0947 for a free estimate on your exact gate.
We Also Serve Cities Near Frisco
Beyond our Gate Access Control in Frisco work, we regularly drive to Prosper, Aubrey, Little Elm, and Celina for gate repairs and installations. Same flat rate trip charge inside the county, no surprises. If you’re just outside Frisco city limits, call us and we’ll tell you straight whether we make sense for your job.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Frisco
Black clay soil. Collin County clay swells when it rains and shrinks when it dries, and that cycle heaves the concrete footings under your gate posts. When the post moves even a quarter inch, the latch no longer lines up. We reset and re-secure the posts, then realign the access control hardware. A keypad mounted on a moving post will keep failing until the post is fixed. Call (979) 291-0947 and we’ll come look at your footing before it gets worse.
Yes, and for long driveways where running mains power would cost thousands, solar is usually the right call. We size the panel and battery to your gate’s weight, width, and daily open cycles, then install the operator, safety edges, and access controls. The key is not undersizing the battery bank, which is what we fix most often on underperforming solar gates. Call (979) 291-0947 for a free site assessment.
Yes. In Frisco, nearly every HOA in the master-planned communities governs finish color, hardware style, and sometimes even operator placement. We quote smart access upgrades that match the HOA’s architectural standards, so you don’t pay for an installation that fails inspection. We’ve done enough work in Starwood, Phillips Creek Ranch, and The Lakes of Frisco to know what those boards approve. Call (979) 291-0947 and we’ll tell you what’s likely to pass before you buy.
You test it. Place an object in the gate’s path and close it. The gate should stop or reverse before crushing the object. In Frisco, ice storm damage and board corrosion can disable entrapment protection silently, which leaves you with a dangerous gate and a liability if a child or pet gets caught. We test every sensor and safety edge on every service call, and we’ll tell you honestly if yours is failing. Call (979) 291-0947 and ask for a safety check.
Very likely, yes. We’ve mapped the build-year-to-model correlations across Frisco’s subdivisions, so we know what operators were spec’d in the 2005-2012 tract communities. Last week our crew rolled up to a home in Phillips Creek Ranch where a LiftMaster LA400’s limit switch had seized after the February ice storm, the same model we’d already replaced three times that month on that street. We carried the control board on the truck and had the swing gate running before the HOA inspector even arrived. Call (979) 291-0947 and we’ll do the same for your gate.
Need a gate access control pro in Frisco who shows up on time, quotes a fair price, and stands behind the work? Call Hal Gatewood at (979) 291-0947. A live person answers, day or night. Free estimates, $40 off any repair over $200, and the 90-Day Done Right Promise in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Frisco since 2001.