Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Little Elm
Gate parts and welding in Little Elm most often comes down to one thing: the post, not the panel. A gate sags in the hinge post, not in the middle, and that is where we start. If you live in Little Elm and your ornamental iron driveway gate is dragging, out of plumb, or the operator arm snapped during a freeze, call (979) 291-0947. We’re Gatewood Fence & Gate, and Hal Gatewood has been fixing gates longer than most of the homes in this town have been standing.
Because Little Elm’s population exploded from roughly 3,600 residents in 2000 to 50,000+ today, most residential gates here were installed in a narrow 2005-2018 window across HOA master-planned communities. That means the same LiftMaster, FAAC, and BFT gate operators and ornamental iron hinges fail here in the same predictable sequence. Our Gate Parts & Welding team has learned to diagnose and stock parts for this exact hardware generation in a way that isn’t possible in older or newer DFW suburbs. We don’t guess. We’ve seen this gate before, in this same subdivision, a dozen times.
Why Gatewood Fence & Gate Is Little Elm’s Preferred Gate Parts & Welding Company
Hal Gatewood has been at this work since 2001, and the name is on the shop. We answer the phone with a live person around the clock, not a voicemail, not a call center three states away. When you call about a sagging gate in Little Elm, you talk to someone who knows what Eldorado Parkway is, who understands why your HOA has a specific spec for gate hardware, and who will actually show up when he says he will.
We repair what other companies want to replace. We weld on site in your driveway, so the gate never leaves your property. Every job carries the 90-Day Done Right Promise in writing. If it is not done right, we make it right, one call brings us back. No runaround. That’s the oldest kind of accountability there is: the name is on the shop, and the shop is down the road.
We show up in uniform, background-checked, with a truck stocked for the 2005-2018 hardware generation Little Elm is built on. You also get $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The price gets quoted and agreed before any work starts. Not a penny more at the door.
Our Gate Parts & Welding Services in Little Elm
Post Replacement
Little Elm sits on North Texas black expansive clay, and that clay heaves. When the soil swells and shrinks through the wet and dry seasons, gate posts move. A post that was set square in 2012 is now tilted two inches out of plumb, and the gate that hangs on it drags or won’t latch. Post replacement means cutting out the old post, digging a deeper footing with proper concrete, and setting a new post that won’t re-shift every spring. If we do not fix the post foundation, the repair will not hold. In neighborhoods like Sunset Pointe and The Shores, near the Lewisville Lake shoreline, we set posts deeper because the water table and clay movement are worse there.
Hinge Replacement
Hinges on ornamental iron gates in Little Elm carry enormous weight, and when moisture works into the hinge pin, they seize or grind. We cut out the old hinges, weld on fresh heavy-gauge steel, and set the gate so it swings clean and closes square. For lakefront homes along the north shore of Lewisville Lake, surface rust forms faster from the humidity, so we typically pair hinge replacement with rust treatment and a fresh protective coat. That’s a standard part of the job here, not an upsell.
Rail Repair
Rails rust and crack at the weld joints, especially where the gate meets the post. We repair rails by welding new steel into the frame, not by slapping a patch plate over rust and painting it. A clean weld holds; a patch hides the problem. Little Elm’s cold snaps and ice storms put extra stress on already-weakened rail welds, so we inspect the entire frame when we repair one rail.
Custom Welding
If your gate needs a section rebuilt, a new hinge plate, a reinforcement gusset, or a custom length for a driveway that is not standard, we weld it on site. Hal carries his welding rig in the truck. You do not haul the gate to a shop. You stand there and watch the work happen, and you can drive to the shop and look Hal in the eye afterward. That is how it should be.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Little Elm
We’re certified to service nine major gate brands, and in Little Elm the ones we see most are LiftMaster, FAAC, Mighty Mule, and BFT. We know the sequence in which these fail because we see the same failure patterns all over town. The 2012 FAAC swing arm that snaps in an ice storm, the LiftMaster circuit board that quits after a power surge on the north shore, the Mighty Mule sensor that loses alignment on a shifting post. We stock the common parts for these units so you are not waiting on a backorder. Fast turnaround is the whole point.
Common Gate Parts & Welding Problems We See in Little Elm Homes
- Post shift from expansive clay. Gates in Little Elm that are less than 10 years old routinely heave out of plumb because the North Texas black clay expands and contracts with seasonal moisture. The gate still looks fine, but the latch won’t catch and the auto-close misses.
- Ice storm damage to operator arms. Winter ice storms hit this part of Denton County harder than areas further south, and they snap gate operator arms when openers are left in auto-lock mode during a freeze. The 2005-2018 LiftMaster and FAAC units are particularly prone.
- Rust on lakefront ornamental iron. The elevated humidity near Lewisville Lake accelerates surface rust on hinges and frames in neighborhoods like The Shores and Sunset Pointe. Hinge pins seize, rail joints rot, and the gate gets noisy long before it fails outright.
- HOA compliance repairs. Many Little Elm subdivisions have specific hardware and finish requirements. We match the HOA spec on every replacement so your gate doesn’t get flagged by the management company.
Pricing for Gate Parts & Welding in Little Elm, TX
Here are real ranges we quote in Little Elm, not vague estimates. Hinge replacement on a standard ornamental iron gate typically runs $180-$380 depending on the number of hinges and whether we need to weld new plates. Post replacement with a proper deep footing runs $400-$900. Rail repair with welded steel runs $150-$350 per rail. Custom welding jobs run $120-$600 depending on complexity and materials. Prices get quoted and agreed before we start any work, and you get $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (979) 291-0947 for a free estimate, or bring us a written estimate and we’ll give a free second opinion.
We Also Serve Cities Near Little Elm
Our crews serve Little Elm locally, and we also cover Frisco, The Colony, Aubrey, and Prosper. If you’re just outside Little Elm, call (979) 291-0947 and we’ll be there. You can find more about our work across the area on our Gate Parts & Welding in Little Elm page.
Serving Little Elm, TX - Our Local Coverage Area
We’re based in the Little Elm area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Little Elm
The black expansive clay under Little Elm swells when wet and shrinks when dry, and if the original post was set in a shallow footing without proper concrete, it’ll heave every year no matter how many times you re-set it. The fix is a deeper footing and proper drainage around the post base. We set our replacement posts to handle the clay movement, so the gate stays plumb through wet springs and dry summers. Call (979) 291-0947 and we’ll assess your current footing before quoting a permanent fix.
First, check whether the opener was locked in auto-lock mode when the ice hit, because that’s what snaps the arm; second, look at whether the gate itself is binding on a shifted post, since that extra drag is what makes the arm break instead of just slipping. Don’t try to weld or jerry-rig the arm yourself, the spring tension and motor torque can hurt you. Call (979) 291-0947 and we’ll send someone to Little Elm to assess both the arm and the gate geometry, so the fix holds.
Yes. The elevated humidity along Lewisville Lake accelerates surface rust on ornamental iron hinges and frames, so the hinge pins seize and the rail joints rot sooner than they do inland toward Frisco. In The Shores and Sunset Pointe we routinely pair mechanical repairs with rust treatment and repainting, because the metal is always in a wetter microclimate. Call (979) 291-0947 for an exact quote, estimates are free.
Yes. Solar openers work fine for ranch entrances and long driveways in Little Elm where running mains power is impractical. The solar panel charges the battery that runs the opener, and with the right panel size and battery capacity for our Texas sun, it’ll handle daily cycling. We install and service solar setups on gates all over this part of Denton County. Call (979) 291-0947 and we’ll help you size the system for your gate weight and usage, estimates are free.
A gate operator in Little Elm typically lasts 8 to 12 years, and the 2005-2018 units are hitting that window now, so if yours is a LiftMaster or FAAC from that era, it’s probably at the end of its service life. When the circuit board is dead and the motor is tired, we’ll tell you plainly whether a repair is throwing good money after bad. We’d rather fix what’s fixable than sell you a replacement, but we won’t fix what’s already done. Call (979) 291-0947 for a straight answer, estimates are free.
Call Gatewood Fence & Gate for Gate Parts & Welding in Little Elm
If your gate is sagging, your operator arm snapped, or your posts are heaving out of the ground in Little Elm, call (979) 291-0947. Hal Gatewood will quote you a price before any work starts, and if it’s not done right, the 90-Day Done Right Promise means one call brings him back. The gate stays in your driveway, the work gets welded on site, and you pay what was agreed. That is the whole arrangement. Call today and get a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Little Elm and the surrounding communities with gate parts and welding since 2001.