Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Frisco
Gate installation in Frisco costs between $2,800 and $9,500 for most automated driveway systems, with ranch-style entrances on acreage typically running $6,000 to $14,000 when solar power and heavy-duty operators are part of the job. Hal Gatewood has been welding, hanging, and powering gates since 2001, and the crew knows Frisco’s neighborhoods, HOAs, and that unforgiving Collin County black clay better than any out-of-town outfit ever will. Call (979) 291-0947 and you’ll get a live person who can tell you straight what your gate needs and what it’ll cost before any work starts.
Why Gatewood Fence & Gate Is Frisco’s Preferred Gate Installation Company
We’re not a franchise with a rotating cast of subcontractors. Hal’s name is on the shop, his address is published, and when you call about a gate in Frisco, you’ll likely talk to someone who’s driven your exact street before. We answer the phone 24/7 with a live person, and the person who shows up to your driveway is background-checked, uniformed, and actually works for Gatewood Fence & Gate, not a dispatch queue three states away.
Frisco homeowners have learned the hard way that a gate is only as good as the post it hangs from and the operator that moves it. When a national company quotes one number over the phone and hands you a different invoice at the door, that trust is gone. We quote upfront, in writing, and we don’t change it. Every job carries our 90-Day Done Right Promise, stamped on the invoice, not buried in fine print. If it’s not right, one call brings Hal back. That’s how we’ve kept Frisco customers calling us for years.
Our Gate Installation Services in Frisco
We install and power every kind of gate Frisco’s housing stock throws at us. Here’s what we handle most in this city.
Swing Gate Installation
Swing gates are the standard across Frisco’s master-planned communities, from Phillips Creek Ranch to Starwood. They’re also the gate type most vulnerable to Collin County’s expansive black clay. When the soil swells after a wet spring, hinge posts heave, latches miss, and gate leaves drag. We install swing gates with proper post depth and concrete footings sized for this soil, and we set the arc so there’s clearance even when the ground moves. A gate that closes clean in July and drags in March wasn’t hung right. We hang it right the first time.
Sliding Gate Installation
Wider entrances, especially on Frisco’s acreage properties east and north of town, call for sliding gates. But rack and pinion slide systems bind when the rail shifts with soil movement, and stripped drive gears are the predictable result. We install sliding gates on reinforced track beds and use operators sized for the gate’s actual loaded weight, not the brochure number. On a double-wide entrance off Eldorado Parkway, that difference is the gap between a gate that runs smooth for a decade and one that eats a gear every other year.
Solar Gate Opener Installation
Frisco has plenty of long driveway entrances, particularly on ranch-style properties where pulling mains power to the gate would cost more than the operator itself. The Lakes of Frisco has several lots like this. We replaced a solar opener there where the original LiftMaster swing gate operator had seized during an ice storm, and the clay had heaved the hinge post out of plumb. Our crew installed a new heavy-duty operator with a safety photocell, reset the post footing, and re-tuned the swing arc so the gate clears even when the black clay shifts after rain. For solar, we size panel and battery capacity to your driveway’s actual usage pattern, not a suburban average, because a dead gate after three overcast days is a gate that doesn’t work.
Double Gate Installation
Double swing and double slide gates are common on Frisco’s larger lots and community entrances. The operator has to work twice as hard, and undersized units fail fast. We install double gates with matched operators, correct in-ground or column-mounted hardware, and safety edges that stop the gate if anything’s in the swing path. HOA safety requirements in Frisco’s newer subdivisions typically demand photocells and reversing edges on any automated double gate, and we install them to spec as standard.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We stock parts and control boards for the operators Frisco builders actually installed, plus the brands worth upgrading to. That includes LiftMaster, FAAC, BFT, Linear, and Viking, alongside Ghost Controls, DoorKing, Elite, and Mighty Mule. Because Frisco’s tract builders from the mid-2000s through mid-2010s frequently spec’d the same two or three low-voltage operator models across an entire neighborhood, we keep the common boards and drive gears on the truck. That’s why we can often turn a two-trip repair into a same-day job.
Common Gate Installation Problems We See in Frisco Homes
Frisco’s specific combination of soil, weather, and housing age produces a distinct set of failures. Here’s what we’re fixing week after week.
- Heaved post footings from expansive clay. Collin County’s black clay shrinks in drought and swells in rain, and that movement pushes concrete post footings out of plumb. A swing gate that scraped the ground in May might clear it in August, then bind again after the first October storm. The fix is a properly sized footing and, often, a reset of the hinge post and re-tuning of the latch.
- Undersized solar panels on long acreage runs. Operators spec’d for a 30-foot suburban driveway drain fast on a 200-foot ranch entrance. We see dead gates after overcast stretches all over the rural edges of Frisco, especially east toward McKinney and north toward Celina. Proper battery storage and panel sizing fix it.
- Stripped slide-gate drive gears from shifting rails. When the ground under a sliding gate’s track shifts, the rack and pinion bind and the drive gear strips. It sounds like a gearbox failure, but the real problem is the rail support. We rebuild the track bed before replacing the gear, or you’ll replace the gear twice.
- Ice storm damage to operator gearboxes and limit switches. Frisco’s winter ice storms, which hit harder here than in southern DFW suburbs, seize gearboxes and crack plastic limit-switch housings. We replace damaged internals and upgrade to cold-tolerant grease where it matters.
Pricing for Gate Installation in Frisco, TX
Here’s what Frisco homeowners actually pay for gate installation. A single swing driveway gate with a basic automated operator runs $2,800 to $5,500. A heavier ornamental steel double gate runs $5,500 to $9,500, depending on width and finish. Sliding gates on a reinforced track bed typically land between $4,500 and $8,500. Solar-powered ranch entrances with battery storage run $6,000 to $14,000, driven mostly by operator capacity and panel count. Your price is quoted and agreed before any work starts, in writing. No trip charge inside the county, and we’ll give you a free second opinion on any written estimate you already have. Seniors and veterans save 10% permanently. Call (979) 291-0947 for a straight answer on your gate.
We Also Serve Cities Near Frisco
Frisco’s gates keep us busy, but we regularly run north and west to Prosper, Aubrey, Little Elm, and Celina. Those communities share the same clay soil, the same acreage lots, and the same builder-era operator models, so what we’ve learned from Frisco’s neighborhoods carries right over the county line. If you’re in one of those towns, you get the same live person, the same upfront price, and the same 90-Day Done Right Promise. We’re proud to call ourselves a Frisco gate installation company, but our trucks cover the whole northern corridor of Collin County.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Frisco
Yes. Nearly every HOA in Frisco’s master-planned communities, including Phillips Creek Ranch, requires architectural review before a gate replacement, and that review typically covers finish color, picket style, and hardware type. Your HOA’s architectural review committee will want to see the gate’s spec before work begins. We provide the technical drawings and hardware details they ask for, and we’ll walk you through the submission process so you’re not stuck in a denial loop. Call (979) 291-0947 and we’ll help you get the paperwork moving.
Yes, and it’s the right call when pulling mains power means trenching hundreds of feet. The key is sizing the panel and battery bank for your driveway’s actual usage, not an average suburban entrance. A long run east of Frisco with several open-close cycles per day needs more panel surface and storage than a short one. We size the system to your gate’s weight, cycle count, and Frisco’s actual sunlight hours so you’re not left with a dead gate after a cloudy stretch. Call (979) 291-0947 for a solar gate opener quote for your specific entrance.
Collin County’s expansive black clay swells when wet, and that swelling heaves the post footings under your hinge posts. Your gate isn’t sagging because it’s old; it’s sagging because the ground under the posts literally moved. A gate sags in the hinge post, not in the middle, and that’s where we start. We reset the footing and re-tune the swing arc so the gate clears when the clay expands after a heavy spring rain. Call (979) 291-0947 and we’ll tell you if a reset fixes it or if you need a new post set.
For a double swing gate on an acreage lot, you need an operator rated for at least 20% more than your gate’s total loaded weight, which means measuring both leaves, accounting for wind load, and checking the hinge hardware. Most Frisco double swing gates on acreage run between 600 and 1,200 pounds per leaf, which puts you in heavy-duty operator territory, not the box-store single-gate units. We size the operator to the actual gate, not the developer’s spec sheet. Call (979) 291-0947 and we’ll measure and price it so you don’t buy too small and replace it in two years.
Yes. Frisco’s tract builders from the mid-2000s to mid-2010s frequently installed the same two or three low-voltage gate operator models across entire subdivisions, and we keep those control boards and drive gears on the truck. If your neighbor’s gate has the same motor as yours, we already know what’s in the box before we pull up. We carry matching hardware and operators for the brands those builders spec’d, so your replacement doesn’t stick out like a mismatched patch on an HOA street. Call (979) 291-0947 and tell us which subdivision you’re in; we’ll likely already know what’s installed.
Call Gatewood Fence & Gate for Gate Installation in Frisco, TX
Your gate is the first thing you see when you pull into your own driveway, and in a city like Frisco it’s also part of the neighborhood’s looked-after character. Whether you need a swing gate hung in Starwood, a solar opener on a long ranch entrance, or a sliding gate that won’t bind on shifting clay, Hal Gatewood and his crew will show up when they say they will, quote a real number, and stand behind the work for 90 days in writing. Call (979) 291-0947 now and you’ll get a live person on the line. We’ll give you a free estimate, a straight answer, and a name you can look up. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Frisco with honest gate installation and repair since 2001.