Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Frisco
Gate repair in Frisco typically costs $180-$520 depending on whether we’re talking about a hinge post that needs resetting, a control board that needs replacing, or an operator that’s reached end of life. Most repairs in Frisco are done same-day because we carry parts for the specific builder-grade operators installed across this city’s 2005-2012 subdivisions. Hal Gatewood has been repairing gates since 2001, and his crews know Frisco’s neighborhoods well enough to show up with the right part the first time. Call (979) 291-0947 and a live person answers, any hour, any day.
Key Takeaways:
- Same-day service in Frisco for most operator, hinge, and alignment repairs
- 90-Day Done Right Promise in writing on every job, no fine print
- No trip charge inside Collin County, $40 off repairs over $200
- Free second opinion on any written estimate you’ve gotten from another company
- Permanent 10% discount for seniors and veterans
- Price quoted and agreed before any work starts, never a surprise at the door
Why Gatewood Fence & Gate Is Frisco’s Preferred Gate Repair Company
Frisco is not a town that came up slowly. It went from a small railroad stop to 200,000-plus residents in about two decades, and the gates went in with the houses. That means most of what we work on in Frisco is between ten and twenty years old, built in master-planned communities like Starwood, Phillips Creek Ranch, and The Lakes of Frisco, and installed by tract builders who spec’d the same handful of operator models across entire streets. We know those models. We know which ones fail first, which control boards burn out, and which drive gears strip. That knowledge means we show up to a Frisco address already holding the part the gate needs, which is the difference between a repair finished before lunch and a gate left half-open for three days.
Hal’s name is on the shop. The shop has a published address and license number. If you want to come look him in the eye before you schedule, you can. If you want to call at 2 a.m. because your gate is stuck open and your grandkids are coming for the weekend, a live person answers. Not a voicemail. Not a call menu that sends you in circles. The person who picks up knows gates, knows Frisco, and can tell you honestly whether that gate can wait until morning or the crew needs to roll out.
Every repair comes with our 90-Day Done Right Promise. If it’s not right, Hal comes back and makes it right. No runaround. No “well, that’s a different part.” It’s one call and he’s on it.
Our Gate Repair Services in Frisco
Electric Gate Repair
Electric gate systems in Frisco take a beating from the weather and the soil. When a gate operator stops responding, the problem is usually the control board, a limit switch that’s cracked from winter ice, or a capacitor that gave out on a 105-degree August afternoon. We service and repair operators from LiftMaster, FAAC, BFT, and Linear, among others. Most control board replacements in Frisco run $220-$450 including the part and the call, and we can typically complete them in one visit because we carry the boards that match the build-year patterns of this city’s subdivisions.
Automatic Gate Repair
Automatic gates combine a motor, a control board, safety sensors, and a physical gate that has to stay straight and level for everything else to work. In Frisco, the gate itself is usually the problem child. Collin County’s black clay soil expands when it rains and contracts during dry spells, and over a few seasons that movement heaves concrete post footings and pulls the gate out of alignment. When the gate fights the operator, the operator loses. We repair automatic gates by fixing the structure first and the electronics second, because a perfectly good opener bolted to a sagging gate will be back for service in six months.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Frisco’s ornamental iron and powder-coated steel gates are heavy, and the posts they hang on were often set without enough concrete or without accounting for expansive soil. We reset posts, weld cracked hinge plates on site, and realign the gate so the latch actually lands where it’s supposed to. Hinge and post work in Frisco usually runs $180-$380 depending on how many posts need to come out, and we do the welding in your driveway. The gate doesn’t leave your property.
Gate Realignment
If your gate drags on the driveway, won’t close all the way, or the latch misses the post by half an inch, you need realignment before the problem gets more expensive. Gate realignment in Frisco typically runs $120-$250 and includes correcting the hinge geometry, adjusting the latch or the rack, and making sure the gate swings or slides square against the posts. Fix the panel without the post and you’ll fix it twice. We won’t do that to you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Frisco homes skew heavily toward LiftMaster, FAAC, and BFT operators because those were the builder-spec choices for most mid-2000s through mid-2010s subdivisions. We stock common control boards, drive gears, limit switches, and safety sensors on the truck, so a Frisco customer usually gets the repair done the day we come out, not after a parts order and a second trip charge.
Common Gate Repair Problems We See in Frisco Homes
Show me the gate closing on its own and I’ll show you where it’s failing. In Frisco, the same failure modes show up again and again because the housing stock went in during a specific window with specific materials and specific homebuilders. Here is what we mostly see:
- Builder-grade operator end-of-life: The gate openers installed across Frisco’s 2005-2012 tract-built neighborhoods are hitting fifteen to twenty years old now, and they’re dying in waves. Whole streets report the same control board failure within months of each other. We carry those exact boards.
- Expansive soil shifting posts and heaving footings: The black clay under Frisco swells in wet months and cracks in dry ones. That movement racks gate frames, tilts posts, and jams slide gates in their tracks. Hinge and post repair is usually the fix.
- No dedicated power run from the house: Many builders did not run conduit from the house to the gate. Homeowners get by with surface-mounted wire, solar panels that barely charged to begin with, or a power run that was trenched incorrectly. Repairs often mean running or repairing that power path.
- HOA-driven hardware mismatches: Frisco HOAs regulate what a gate can look like, and a homeowner who replaces a hinge or a handle with a big-box part can get a letter. We work with the architectural standards already in place so repairs clear review without friction.
Pricing for Gate Repair in Frisco, TX
Frisco pricing is not a mystery and we will not treat it that way. A typical hinge and post reset runs $180-$380. A control board replacement runs $220-$450, including the board and the call. A full operator replacement, labor included, typically runs $650-$1,300 depending on the brand and whether the old bracket and conduit can be reused. Gate realignment is usually $120-$250. The two things that move a Frisco quote are soil damage under the posts and electrical work that has to be run or repaired, so we’ll walk the site with you and hand you a written number before any work starts. That number is the number. We also take $40 off any repair over $200, there’s no trip charge anywhere inside Collin County, and if another company gave you a written estimate, we’ll give you a free second opinion. Call (979) 291-0947 and the person who answers will set it up.
We Also Serve Cities Near Frisco
If you’re reading this from Prosper, Aubrey, Little Elm, or Celina, we bring the same repair-first approach, the same on-site welding, and the same 90-Day Done Right Promise. Our Gate Repair team covers all of these communities with the same live-answer phone number and the same no-trip-charge policy inside the county. You’re close enough that we’re still your local gate repair, not a company that’s passing through.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Frisco
Those neighborhoods were built during Frisco’s 2005-2012 housing boom, and the tract builders who constructed them spec’d the same two or three low-voltage gate operator models across hundreds of homes. Those operators were not meant to last twenty years, and they’ve now hit peak failure age together. That’s why one street in Starwood will see three identical control board failures in the same season. We map build year to operator model, so when we pull up in Phillips Creek Ranch, we usually already have the right control board and drive gear on the truck.
Yes. Many Frisco homes were built with a manual ornamental gate and no power run from the house, either because the builder skipped it or the original owner didn’t want automation. We can run a new electrical line to the gate, set the operator, and add a safety photocell and keypad entry. The job usually takes one day and includes trenching for conduit, which is a real cost and a real mess that some companies won’t touch. We do it and we’re honest about the price before we dig.
It can. Frisco’s HOA-governed subdivisions often require architectural review for anything that changes the gate’s finish, picket style, or hardware. A repair that swaps a broken hinge for a similar hinge usually moves that same day. A gate replacement that changes the color or the ornamental pattern needs HOA sign-off before we install. We have worked through enough Frisco HOA review processes to know what triggers a delay and what doesn’t, and we’ll tell you which side of that line your job falls on before we order anything. Call (979) 291-0947 and we’ll walk you through it.
The black clay under Frisco swells when it rains and shrinks when it dries. That repeated movement heaves concrete post footings out of square, which tilts the gate slightly. A tilted gate puts constant lateral pressure on the operator’s drive gear and the hinge bearings, and the motor has to work harder every single cycle. Eventually the gear strips or the control board overheats. It is rarely the operator alone. If the posts are not reset in good concrete, a new operator will fail early, which is why we check footings before we replace anything.
Entrapment protection, meaning a monitored safety edge or photocell, is required on automated gates, and in Frisco it is enforced at the HOA level and by the manufacturer’s UL 325 listing. If your gate can reverse onto a car or a person without stopping, that’s a serious safety hazard and a code violation. We install and calibrate the correct entrapment protection on every operator we service. Call (979) 291-0947 for a free estimate, and we’ll make sure the gate is safe, not just opening.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Frisco and the surrounding communities since 2001.