Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across The Colony
The Colony’s gate systems fail in patterns we can predict block by block. From the original Fox and Jacobs tract homes near Blair Oaks to the gated HOA subdivisions around The Tribute, the same two culprits keep showing up: Blackland Prairie clay shifting posts out of plumb, and builder-grade operators from the 2000s that have simply run out of life. A gate that won’t open is not an inconvenience. It strands your car, blocks your morning, and leaves your backyard wide open. We answer the phone 24 hours a day at (979) 291-0947, and we’ll give you an honest read on what’s actually wrong before anyone picks up a tool.
Why Gatewood Fence & Gate Is The Colony’s Preferred Gate Repair Company
Hal Gatewood has been running Gatewood Fence & Gate since 2001. The name is on the shop, his address is published, and his license number is there for anyone to look up. We’re not a call center three hundred miles away. When you call about a gate failing in The Legends, The Tribute, or Austin Waters, the person who answers understands what clay soil does to a hinge post here because we’ve dug enough of them out.
- The 90-Day Done Right Promise. Every job we do in The Colony carries a written promise: if it’s not done right, we come back and make it right. No phone tag, no excuses. One call brings Hal back.
- Live person, every call. No voicemail, no queue, no chatbot. 24/7. The person who answers is someone who can actually talk through what you’re seeing at the gate.
- Upfront pricing that does not move. We quote a price before any work starts, and that is the price on the invoice. No surprise trip charges inside the county, no door-knock adjustments. $40 off any repair over $200. Free second opinion on any written estimate. 10% off for seniors and veterans, every day.
- On-site welding. Your gate does not go on a trailer. Hal fixes it in your driveway, which matters when a swing gate has a cracked weld and a shifting post. Fix the panel without the post and you’ll fix it twice.
We repair gates in The Colony rather than swapping them out. That is the core of how we work. Show me the gate closing on its own and I’ll show you where it’s failing. We find the failure and fix that, not the bundle of parts bolted to it.
Our Gate Repair Services in The Colony
Electric Gate Repair
Two decades of North Texas thermal cycling has been hard on The Colony’s electromechanical operators. A builder-grade operator installed on a 2004-era ornamental gate in a Carrollton-adjacent subdivision has spent every summer baking and every ice storm freezing. Gearboxes strip, capacitors blow, boards fail. We service LiftMaster, FAAC, BFT, Linear, Viking, two more brands, and a couple more besides. If there’s power at the gate and the operator won’t move, that’s a diagnosis, not a mystery.
Automatic Gate Repair
When a gate was automated, the operator was installed to open a gate in a specific geometry. The operator does not know when the post has moved an inch out of plumb. It just works harder every cycle until the motor burns or an entrapment sensor trips. Automatic gate repair in The Colony is often less about the motor and more about the geometry around it. We check the post, the hinge, the arm throw, and the force settings before we call anything “fixed.”
Hinge & Post Repair
The Blackland Prairie clay under The Colony heaves and shrinks with the seasons. A gate sags in the hinge post, not in the middle. When the post leans, the gate leans with it, and every open-close cycle puts another pound of stress on the hinge barrels and the operator’s gearbox. We reset concrete posts, re-plumb hinges, weld gussets where the old weld failed, and add support where the soil keeps moving.
Gate Realignment
The Colony’s HOA subdivisions are dense with ornamental iron swing gates hung on posts set decades ago. Freeze-thaw cycles move those posts. South-wind humidity off Lake Lewisville eats at the pivot points. The result is a gate that scrapes the driveway on one side and won’t latch on the other. Realignment is not a hammer adjustment. It’s re-setting what moved, not forcing what didn’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in The Colony
We service nine major gate brands, including FAAC, BFT, and Linear. Stocking local parts for The Colony customers matters because the HOA gates along the Lake Lewisville shoreline go through hinge pins faster than inland streets do, and nobody wants to wait a week on a part that should have been in the truck. We keep what fails here, where we fix it.
Common Gate Repair Problems We See in The Colony Homes
- Builder-grade operators failing en masse. The 1990s and 2000s HOA boom installed thousands of electromechanical swing and slide gate operators in The Colony at the same time. They’re all reaching end-of-life together. The gearbox on a 22-year-old operator doesn’t often give warning before it strips.
- Post heave from Blackland Prairie clay. This clay shrinks during a dry July and swells during a wet October, and every shift nudges the concrete post base a little further out of square. The gate still looks fine from the street while the operator’s force multiplication gradually eats itself.
- Rust-through at weld joints near the lake. Streets in The Tribute and other Lewisville-adjacent subdivisions get south-wind humidity off the reservoir almost year round. We see ornamental iron gates rust through at the bottom rail weld years before identical gates a mile inland show any sign of it.
- Power and conduit runs that were never installed. In The Colony’s newer developments, we regularly find automated gates that were run off an extension cord or a shallow-buried wire laid after the fact because nobody planned for the operator during the build. It works until it doesn’t, and then it fails unpredictably.
Pricing for Gate Repair in The Colony, TX
Here’s what you can expect. A typical electric gate repair in The Colony runs $180-$340. Hinge and post repair usually lands between $275-$600 depending on whether we’re re-setting one post or two and how much welding the panel needs. Gate realignment sits in the $150-$300 range for most driveway gates. A full operator replacement on a standard swing gate typically runs $750-$1,450. Every price is quoted and agreed before any work starts. No trip charge inside the county. Call (979) 291-0947 for a free estimate.
We Also Serve Cities Near The Colony
Our gate repair crews work the whole north Dallas-Fort Worth corridor. If you’re in Little Elm, Plano, Prosper, or Frisco, you’re inside our service area and the same Gate Repair pricing, the same written 90-Day Done Right Promise, and the same live-person phone call applies.
Serving The Colony, TX - Our Local Coverage Area
We’re based in the The Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in The Colony
Because The Colony’s HOA subdivisions built up in a compressed window, developers installed thousands of electromechanical operators within roughly 15 years of each other. Those operators now hit end-of-life in the same few seasons. When one fails on a street, the neighbor’s is often months behind it. Call (979) 291-0947 for a quote if yours is acting up, even if it still runs intermittently.
The clay expands when wet and shrinks when dry, and it moves concrete gate posts with it. A post base can shift an inch or more through the seasons, which throws the gate out of plumb and makes the operator work against itself. You may notice the gate scraping, the latch missing, or the operator buzzing but not moving. The repair starts with the post, not the operator. The estimate is free: (979) 291-0947.
It’s a The Colony lakeside issue, specifically. The persistent south wind coming off Lake Lewisville carries humidity into neighborhoods like The Tribute, and welded joints on iron gates are the first place that moisture attacks. Weld points fail before the rest of the panel. We see it on nearly every lake-adjacent gate we service. The fix is often a stronger repair at the weld plus a coating match, not a full gate replacement. We quote that on-site and in writing before work begins.
In most of the The Colony gates we see, the panel and posts are still solid and the operator is the failed part. Replacing the whole setup means paying for a gate you didn’t need. Hal repairs what’s broken and tells you if the panel has more life left, or if it’s actually time. The answer is not always to spend more. The estimate is free, and there’s $40 off any repair over $200. Call (979) 291-0947.
Yes, and this is a common job for us. The newer developments in The Colony often have gates that were installed manually during the build, with no power run planned. We handle the operator selection, the conduit and wiring, and the safety edges so the job meets code. It’s measured, quoted, and scheduled. No same-day rush on that one, and that’s because we’re doing it right. A free measure and a written price: (979) 291-0947.
If your gate is failing in The Colony, stop guessing. Call (979) 291-0947 and talk to someone who knows what clay soil does to a post, what lake humidity does to a weld, and what a builder-grade operator sounds like right before it dies. We quote upfront, we answer ourselves, and we stand behind the work in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving The Colony and surrounding communities since 2001.