Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Oak Point
Gate installation in Oak Point usually means one of two things: a new custom driveway gate on a newer build, or replacing a gate that the clay soil finally beat out of square. Most of what we install in Oak Point is custom fabricated or ornamental steel on larger lots east of Lake Lewisville, running off operators like LiftMaster, FAAC, and Mighty Mule. We’re familiar with the streets, the soil, and the way the lake humidity treats iron. Call (979) 291-0947 and we’ll schedule a time to look at your property and give you a written price before any work starts.
Why Gatewood Fence & Gate Is Oak Point’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001, and his name is still on the shop and on every invoice. That matters in Oak Point, where homeowners want to know who is actually welding their gate and whether that person will stand behind it in three years when the posts start to lean. We carry the 90-Day Done Right Promise in writing on every job. If something isn’t right, one call brings us back. No runaround.
Oak Point homeowners tend to ask the same two questions before they hire anyone: will you answer the phone, and will you show up when you said you would. We answer with a live person 24 hours a day, seven days a week. Not a voicemail tree. Not a call center. The person who answers knows gates, and if it’s not Hal, it’s someone on his crew who can talk you through the problem before they ever drive out.
Crews serving Oak Point are background-checked and uniformed, and the trucks come stocked for the brands we see most out here: LiftMaster, FAAC, BFT, and Mighty Mule. We weld on site, in your driveway, instead of hauling your gate to some distant shop. That keeps turnaround tight and lets us match existing ornamental work exactly where it matters, at the hinge and weld points. Learn more about our full Gate Installation service area and coverage.
Our Gate Installation Services in Oak Point
Here’s what we install most often around Oak Point, and what the local conditions mean for each one.
Driveway Gate
Oak Point’s housing stock is largely custom luxury homes from the 2000s through the 2020s, and many of them have driveway gates that were installed by the original builder. Those gates are often ornamental steel or wrought iron. When we install a new driveway gate in Oak Point, we size the posts and footings for the clay, not for the gate. That’s the difference between a gate that closes plumb for a decade and one that’s dragging in four years.
Swing Gate
Swing gates are the dominant style in Oak Point, especially double swing gates on wider drives. The issue here isn’t the gate itself, it’s the hinge post. Expansive Blackland Prairie clay swells during wet winters and springs, then shrinks and cracks in summer. That cycle torques posts out of plumb. We core the old footings, pour new piers below the active clay zone, and recalibrate the operators so the gate swings true.
Sliding Gate
Sliding gates work well on Oak Point properties where the driveway slopes or where snow and leaves would block a swing arc (the leaves are a bigger issue than snow here). But as the soil shifts, the track bed can move, knocking the rack and pinion out of alignment. We see slide gates binding and tripping safety photocells more often near the lake than inland. The fix is realigning the track, not just greasing the rollers.
Pedestrian Gate
We also install and rebuild pedestrian gates, which on Oak Point properties often sit next to a large driveway gate and use matching ironwork. A pedestrian gate that won’t latch isn’t an inconvenience; it’s a weak point. We match the existing ornamental pattern, fit the hinges to carry the weight, and set the post so the gate holds square through the wet season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Oak Point
On Oak Point jobs, the equipment tends to be LiftMaster on swing gates, sometimes US Automatic on older slide gates, and Mighty Mule or FAAC on ranch-style and pedestrian entries. We’re certified to service nine major brands, and we stock common boards, arms, sensors, and remotes so we don’t have to make a four-hour parts run while your gate sits open. When we install, we spec operators that match the gate’s weight and the property’s soil conditions, not whatever was on sale at the box store.
Common Gate Installation Problems We See in Oak Point Homes
- Posts heaving out of plumb within 3-5 years. The Blackland Prairie clay around Lake Lewisville moves more aggressively than most installers expect. A new gate installed on shallow footings will start dragging or failing to latch surprisingly fast. We key our footings below the active clay zone on every Oak Point install.
- Surface rust forming faster than inland properties. Proximity to the lake adds humidity that accelerates oxidation on ornamental iron. Hinge welds rust, then the gate sags at the hinge post, not in the middle. Our rust remediation and weld repair come before we ever talk about replacing a panel.
- Slide gate operators losing rack and pinion alignment. Soil shift moves the track bed, the gate binds, and the safety photocells trip constantly. We realign the track and reset the limits rather than swapping the operator and pretending that fixes the root cause.
- Builders installed gates without accounting for clay movement. Even newer custom homes in Oak Point often have gate footings sized for stable soil. We see this so often that a “new gate, already dragging” call is a predictable pattern within this specific lakeside corridor.
Pricing for Gate Installation in Oak Point, TX
A new pedestrian gate installation in Oak Point typically runs $1,200-$2,800 depending on size, material, and whether we’re matching existing ornamental work. A single driveway swing gate with a LiftMaster operator generally lands between $3,800 and $7,500. Custom double swing gates built and welded on site start around $6,500 and go up with size, automation, and any matched intercom or camera entry. A sliding driveway gate installation usually falls in the $5,000-$9,000 range because the track bed, steel frame, and heavier operator cost more.
What changes the number is the post work. If we’re coring old footings and pouring deeper piers through the clay zone, that adds $800-$1,500 per post, and in Oak Point we recommend it on most new installs near the lake. Every job is quoted in writing before we start. You agree to the price before any work begins, and that’s the price you pay. Call (979) 291-0947 for a free estimate in Oak Point.
We Also Serve Cities Near Oak Point
Most of our Oak Point customers came to us from a neighbor who got tired of gates that wouldn’t latch. We serve Oak Point and the surrounding communities, including Prosper, Plano, Allen, and Frisco. Wherever you are in that corridor, the same crew, the same 90-Day Done Right Promise, and the same live person on the phone apply.
Serving Oak Point, TX - Our Local Coverage Area
We’re based in the Oak Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Oak Point
The lake’s presence raises ground moisture, which makes Denton County’s Blackland Prairie clay swell and shrink even more aggressively than it does a few miles inland. That repeated movement torques gate posts out of plumb faster. On Oak Point installs we set post footings below the active clay zone so the gate doesn’t drag within a few years. If your gate is already leaning, call (979) 291-0947 and we’ll look at the post, not just the panel.
Because original installers often sized footings for stable soil, not for the clay near Lake Lewisville’s watershed. We regularly see gates only three to five years old that have shifted enough to drag. The fix is coring the old footings, pouring concrete piers keyed below the clay zone, and re-hanging the gate. It’s not a patch job; it’s the same process we’d use on a new install.
Yes. We fabricate and weld on site, so we can match existing ornamental iron patterns at the hinge stile, pickets, and top rail. This matters in Oak Point, where many homes have custom ironwork from the original builder. We’ll take measurements and show you a written quote before we cut or weld anything. Call (979) 291-0947 to schedule a free measure.
Oak Point follows the same UL 325 standard as the rest of Texas: automatic gates need at least two independent entrapment protections, typically photo eyes and reverse features built into the operator. This is not optional. We wire and test every safety device on every automated install, and we’ll walk you through what’s protecting your family and your delivery vehicles. If someone installs a gate without working photo eyes, they did it wrong, and we’ll fix it.
On a properly installed gate with footings below the clay zone, hinges should hold for years without adjustment. But with lake humidity accelerating surface rust, we recommend a quick hinge and weld inspection every two years. It’s a small job, and it catches sag before the gate starts dragging and stressing the operator. For a free second opinion on any written estimate, call (979) 291-0947.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Oak Point since 2001.