Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Shady Shores, TX
If your gate is sagging, grinding, or refusing to open along the Lake Lewisville shoreline, you’re dealing with two forces at once: the shifting Blackland Prairie clay under your posts and the lake humidity eating at your hinges and operator. We get that combination because we see it on nearly every call in Shady Shores. Gatewood Fence & Gate has been fixing gates since 2001, and when you call (979) 291-0947, a live person answers, not a queue. We’ll put eyes on your gate, tell you honestly whether it needs a weld or a full replacement, and stand behind the work with our 90-Day Done Right Promise in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Shady Shores Homeowners Choose Gatewood Fence & Gate
Hal Gatewood’s name is on the shop, not just the website. That matters in a town like Shady Shores, where the person who fixes your gate is probably going to be somebody you run into at the boat ramp or the hardware store. We’re the repair-first shop, the one that welds a cracked hinge in your driveway instead of hauling the gate off and selling you a new one. If it’s repairable, we repair it. We don’t put our thumb on the scale toward replacement because replacement is more profitable for us. Around here, the combination of lake spray and clay movement means gates fail in specific, predictable ways, and we’ve learned to trace those failures back to their source. Fix the panel without addressing the post drift, and you’ll fix it twice. Show me the gate closing on its own, and I’ll show you where it’s failing. We’ve done street-side entry gates and dock-access gates for homeowners in The Shores and along Shady Shores Road, and we’re familiar with the particular wear patterns on waterfront parcels versus the slightly drier lots up toward Swisher Road.
Gate Repair Services We Offer in Shady Shores
Gate Repair
When a gate sags, the hinge post has usually moved, not the gate panel itself. Our repair process starts with checking post plumb and alignment before we touch the hinge hardware. We weld on site and replace only what’s actually failed, so you don’t pay for parts you didn’t need.
Learn more about our Gate Repair in Shady Shores.
Gate Installation
New gates on Shady Shores lots have to be set for the soil they live in, not just the gate width. We account for Blackland Prairie clay movement and set posts deep enough to hold their plumb through wet winters and dry summers. Every installation starts with a free measure and a written, upfront price, quoted and agreed before any work begins.
Learn more about our Gate Installation in Shady Shores.
Gate Motor & Opener
Lakeside humidity is brutal on circuit boards and limit switches, and we service LiftMaster, FAAC, Linear, and Viking operators regularly along the Lewisville shoreline. Whether your opener is dead entirely or just reversing when it shouldn’t, we diagnose the actual component failure before recommending a repair or replacement.
Learn more about our Gate Motor & Opener in Shady Shores.
Gate Access Control
Waterfront properties often have a controlled entry at the street and a second access point at the dock, boat ramp, or lake-side fence line. We handle keypads, intercoms, vehicle detection loops, and the low-voltage runs that connect them, including full troubleshooting when one side of the system fails.
Learn more about our home services line for a full walkthrough of what access control covers.
Gate Parts & Welding
Sometimes the gate itself is fine and the hinge barrel is cracked, or a picket has rusted through at the rail. We bring the welder to you. On-site welding keeps your gate in your driveway and your project on your schedule, not ours.
Neighborhoods We Serve in Shady Shores
We work throughout Shady Shores, from the waterfront streets off Lakeview Drive and Shady Shores Road to the homes along Swisher Road and the lots up toward the north end of town. Typical response time for gate repair in this area is same-day or next-day for most calls.
- Waterfront parcels along Lakeview Drive
- Homes along Shady Shores Road
- Properties near Swisher Road
- Lots on the north side of town
Why Shady Shores’s Climate & Housing Affect Gate Repair
Shady Shores sits directly on Lake Lewisville, and the combination that beats up gates here is specific: expansive North Texas Blackland Prairie clay that swells in wet winters and cracks in summer drought, plus persistent lakeside humidity that corrodes hinges, springs, and operator components far faster than in the drier inland suburbs around DFW. Most residential lots here are waterfront or near-waterfront, and the housing stock from the 1980s through the 2000s commonly includes ornamental iron or steel perimeter fencing with automated driveway gates. We see post drift that pulls latch hardware out of alignment, hinge barrels that seize from rust, and operator boards that fail from trapped moisture. A gate that worked fine in March can be dragging by August after the clay shifted and the post kicked out half an inch. That’s not a breakdown you can prevent with spray lubricant; it’s a ground movement problem, and it requires resetting the post or replacing the hinge weld, not just tightening bolts.
There’s another layer specific to Shady Shores: homes on the water often have a second gate or controlled fence line at the dock or boat ramp. That gate gets the same lake spray, the same humidity, and usually less attention than the street-side gate. When we come out for one gate, we walk the other one too. It’s routine to find that a dock-access gate’s operator has a corroded board or its hinges are rusted through, right alongside whatever problem prompted the original call. Many Shady Shores homeowners have two gate systems on the property, and both of them age in the same damper, harsher microclimate.
Pricing for Gate Repair in Shady Shores
Here’s the honest picture on cost. Gate repair in Shady Shores typically runs $185 to $485 for most hinge, latch, and post-plumb corrections, depending on how far the post has moved and how much welding is needed. Operator replacement on a swing gate usually lands in the $700 to $1,900 range. Access control keypads and low-voltage runs fall between $250 and $900 for most single-entry fixes. Every price is quoted and agreed before any work starts, so the number you hear is the number you pay. We don’t play the game of a low phone quote and a bigger invoice at the door. Call (979) 291-0947 for a free estimate, and ask about the $40 discount on any repair over $200 and our permanent 10% senior and veteran discount.
Service Area - Cities Near Shady Shores
We work throughout the northern DFW corridor. If you’re in Prosper, Plano, Allen, or Frisco, you’re in our service area. The same repair-first approach and 90-Day Done Right Promise follow us everywhere.
Serving Shady Shores, TX - Our Local Coverage Area
We’re based in the Shady Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Shady Shores
Most repairs in Shady Shores run $185 to $485 for hinge, latch, and post-plumb work, and $700 to $1,900 for operator replacement, with access control fixes usually landing between $250 and $900. The price is quoted and agreed before any work starts, not after. Call (979) 291-0947 for an exact quote; estimates are free.
In most cases, yes. We run same-day and next-day response throughout Shady Shores, and we answer calls with a live person 24 hours a day. If your gate is stuck and you can’t get a vehicle in or out, mention it when you call so we can prioritize the visit. Call (979) 291-0947 and tell us what’s happening.
Usually a repair. Sagging on one side most often means the hinge post has drifted out of plumb or the hinge barrel has worn or rusted. We fix the post or re-weld the hinge barrel on site rather than selling you a new gate. If the gate panel itself is rusted through, we’ll tell you that honestly, but most Shady Shores gate sags are repairable.
That click usually points to a failed capacitor, a stuck limit switch, or a worn gearbox, and lakeside humidity accelerates all three. We diagnose the specific component rather than replacing the entire operator when it’s not necessary. If you’re in Shady Shores, call (979) 291-0947 and we’ll get it looked at.
Yes, and that’s two-gate territory we know well in Shady Shores. Lakefront properties often have a controlled entry at the street and a second gate or fence line at the dock or boat ramp. We check both when we’re on site. The dock-side gate is frequently worse off than the street-side one because it takes the same lake spray with less attention.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Shady Shores since 2001.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Shady Shores Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg