Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Plano, TX | Gatewood Fence & Gate
We provide independent Ghost Controls gate opener repair across Plano, and the quick answer is this: most Ghost Controls failures we see here aren’t the motor’s fault. They’re the result of Plano’s Blackland Prairie clay heaving gate posts out of plumb, which throws off limit switches and burns up couplers. Hal Gatewood has been doing Gate Repair in Plano and across Collin County since 2001, and we stock the Ghost Controls parts Plano homeowners actually need. Call (979) 291-0947 for a free estimate, answered by a live person any hour of the day.
Why Plano Residents Choose Us for Ghost Controls Service
We’re not a national outfit that sends a different tech every time. Hal Gatewood’s name is on the shop, his address is published, and he’s been at this since 2001, back when Plano’s newer subdivisions were still being staked out. Our crew works on Ghost Controls openers constantly, and we know the AXDP, TSS1, DSL, and FP series well enough to diagnose over the phone half the time. We’re an independent service provider, not manufacturer-affiliated, which means we’re not tied to factory lead times when your HOA is on your back about a gate that won’t close. If Ghost Controls sales & service is what you’re after, we can usually get your opener running same day.
The real difference is straightforward: we repair what other companies want to replace. We weld on site in your driveway, we re-set posts that have drifted, and we stand behind every job with our 90-Day Done Right Promise in writing. One call brings Hal back, no runaround.
Common Ghost Controls Gate Repair Problems We Solve in Plano
- Limit switch drift from post movement. Plano’s clay soil shrinks in summer drought and swells in spring rain, walking gate posts out of vertical. When a post tilts even an inch, your Ghost Controls swing opener over-travels or stops mid-cycle. We re-set the post or re-calibrate travel limits, depending on how far it’s moved.
- Armature and coupler wear on AXDP and TSS1 models. After repeated post re-alignment, the armature takes the strain. You’ll hear grinding or a stall when the gate should be moving. We replace the worn coupler and re-balance the gate so the opener isn’t fighting the weight.
- Battery backup and transformer failures. East Plano subdivisions built with exposed motor mounts get hammered by freeze-thaw cycles. Older Ghost Controls units with battery backup often fail after a winter ice storm. We test the transformer first, then the battery, and replace only what’s dead.
- Obstruction sensor false positives. Double swing gates in HOA communities with tight clearance are sensitive to wind and fence movement. If your Ghost Controls gate reverses for no reason, the photo eye or the sensitivity setting is usually the culprit. We adjust before we swap parts.
- Remote and receiver issues after power surges. Plano’s storm season brings lightning strikes and surges that fry receiver boards. We pair a new remote first because it’s cheap, then test the board if that doesn’t work. No guessing, no upselling.
Ghost Controls Service in Plano: What Local Conditions Mean for Your Equipment
Plano sits squarely on Blackland Prairie clay, and that’s the single biggest factor in Ghost Controls opener failures here. This clay shrinks more aggressively than any soil type in North Texas. During a July drought, the ground pulls away from gate posts. When April rains come, the clay re-saturates and heaves upward. After a few seasons of that cycle, posts that were plumb are now leaning, and your Ghost Controls opener is fighting geometry instead of gate weight.
That’s why we see more limit switch and coupler failures in Plano than in neighboring Allen or Frisco, where the soil is less expansive. In Willow Bend and Kings Ridge, we’ve re-set posts that drifted an inch and a half since spring rains, then re-programmed Ghost Controls limit stops to match the corrected swing arc. A tech who doesn’t understand clay heave will keep replacing limit switches and wonder why they fail again in eight months. We re-set the post first, because that’s where the problem lives.
Ghost Controls Models & Products We Service in Plano
We service all the residential Ghost Controls lines you’re likely to have on a Plano property: AXDP Series dual openers for double swing gates, TSS1 Series single swing openers, DSL Series linear slide openers, and FP Series pedestrian gate openers with solar options. We stock genuine Ghost Controls control boards, armatures, and remotes when we can get them quickly, but we also keep quality aftermarket remotes, batteries, and limit switches on the truck for fast turnarounds when OEM lead times would hold up an HOA-critical repair. For openers older than 8 to 10 years with repeated post-shift damage, we’ll tell you straight: our Gate Installation in Plano beats repairing the same board twice.
Ghost Controls Service Pricing in Plano
Service pricing for Ghost Controls repair in Plano falls in a range rather than a flat rate, because post movement, opener age, and HOA hardware requirements all change the job. Here’s what you can expect:
- Diagnostic and minor repair: $95-$175 (remote replacement, limit switch adjustment, sensor realignment)
- Motor or armature replacement: $220-$450 depending on series and part availability
- Post re-set with concrete: $300-$600 per post, including re-calibration of the Ghost Controls limit stops
- Full opener upgrade: $800-$1,800 installed, depending on swing weight, power access, and HOA finish requirements
Every price is quoted and agreed before any work starts. We don’t show up with a lowball number and hand you a bigger invoice at the door. We also offer no trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate. Call (979) 291-0947 and we’ll talk it through before we even schedule.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Plano
Over-travel after a drought happens because the clay soil around your gate post has shrunk, letting the post tilt slightly outward. That changes the swing arc, and your Ghost Controls limit switches, which were calibrated to the old arc, now let the gate travel too far. We re-set the post or adjust the limit travel, then re-calibrate so the opener knows where to stop. Call (979) 291-0947 for an exact quote, free.
For repairs that don’t change the gate’s appearance, like motor work, limit switch calibration, or remote replacement, no architectural review is needed. If we’re replacing a panel, changing hardware finish, or re-setting a post that requires new concrete, most Plano HOAs including communities like Willow Bend and Kings Ridge want the repair submitted to the architectural review board first. We know those requirements and can help you file the paperwork.
Most of the time the remote is fine and the surge took out either the receiver board or the transformer. We test the remote by pairing a known-good one, then move to the board. If the board is dead on an opener older than 8 to 10 years, we’ll recommend an upgrade instead of repairing the same board twice. We quote before any work starts so there’s no guessing at the door.
It will work until it doesn’t. A leaning post forces the opener to fight added resistance, which wears couplers and burns out armatures faster. The gate gets louder, then it stalls, then the limit switches start over-traveling. We re-set the post in concrete, shim the hinge, and re-calibrate the Ghost Controls limits before the motor takes more damage. The repair costs less than replacing the opener and the post together.
Yes, and we do it regularly across Plano. Adding battery backup or smart access to an older opener doesn’t require touching the factory seals or control firmware in a way that voids the Ghost Controls warranty, and as an independent service provider we use compatible parts rather than forcing a factory upgrade. We’ll tell you if your opener is too old to make the upgrade worthwhile. Call (979) 291-0947 and we’ll tell you straight.
Service Areas Near Plano
We serve all of Plano service area plus the surrounding communities. If you’re in Prosper, we handle Ghost Controls repair there too. Same for Ghost Controls service in Allen and Ghost Controls service in Prosper, along with Frisco, McKinney, and Little Elm. Hal’s shop is down the road, not three states away.
Book Your Ghost Controls Service in Plano Today
We’re available same day for most Plano repairs. Call (979) 291-0947 and a live person answers, not a voicemail queue. We’ll give you a free estimate, quote the price before we start, and stand behind the work with our 90-Day Done Right Promise in writing. Hand me your number and I’ll call you before I pull up, that way you’re not standing in the driveway waiting on me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Plano since 2001.