Gate Repair Cost Breakdown: The Prosper Homeowner's Reference for 2026

Gate Repair Cost Breakdown: The Prosper Homeowner’s Reference for 2026

We have seen two written quotes for the same sagging driveway gate in Prosper land nearly $400 apart. Same gate. Same street. Same week. The difference was not greed on one side or charity on the other. One contractor had walked the post, found the rot below grade, and priced the job as a post reset with a new hinge set. The other had looked at the hinge itself and quoted a swap. The first quote fixed the gate for a decade. The second one bought the homeowner six months. This guide breaks down what gate work actually costs in Prosper in 2026, line by line, so you can read a quote and know whether the person who wrote it found the real problem. For hands-on preparation, see our Gate Repair Maintenance Checklist for Prosper Homeowners.

Call (979) 291-0947

Quick Answer

Gate repair in Prosper, Texas typically runs between $180 and $340 for common component fixes like hinge replacement, keypad swaps, or receiver repair, while larger structural work like a post reset or full gate remount lands between $400 and $1,100 depending on materials and access. Opener and motor replacement for a single swing gate starts around $650 and can reach $2,400 on heavier custom gates in neighborhoods like Star Trail or Windsong Ranch. Every price you see here is quoted and agreed before any work starts at Gatewood Fence & Gate home.

Table of Contents

• Hinge Repair and Replacement Costs in Prosper
• Post Reset and Gate Remount Costs
• Weld Repair Costs and Why Location Matters
• Opener and Motor Replacement Costs
• Keypad, Receiver, and Accessory Repair Costs
• What After-Hours Service Actually Costs in Prosper
• How to Read a Gate Repair Quote
• Repair Versus Replacement: The Cost Math
• Common Mistakes to Avoid
• When to Call a Professional

Hinge Repair and Replacement Costs in Prosper

Hinge work is the most common repair we do in Prosper, because the hinge is where a gate’s weight concentrates every single time it opens. The gate pivots on a few square inches of steel. When that steel wears, the gate drags on the latch side, scrapes the brick or stone column, and eventually binds completely. A hinge job in Prosper in 2026 runs $140 to $320 for a standard pair on a gate up to about six feet tall and eight feet wide. The low end is a straightforward bolt-on hinge set on a sound post with good access. The high end is a welded barrel hinge on a heavier custom gate, or a situation where the old hinge has bent enough that the gate needs to be lifted, supported, and aligned before the new set goes in.

The price jumps when the hinge post itself is the problem. A gate sags in the hinge post, not in the middle. If the post is in concrete and has shifted a quarter inch, new hinges will bind the same way the old ones did within a year. That is why we check the post with a level before we quote a hinge. Half the hinge jobs we quote in Prosper neighborhoods like Gentle Creek and Whispering Farms turn out to be post problems wearing hinge clothes. You cannot fix a moving post with a better hinge. The hinge is the symptom. The post is the cause.

Labor on a hinge job is typically 45 minutes to two hours depending on whether we’re working on a welded frame or a bolted picket panel. Materials are rarely the expensive part. A decent commercial hinge set is $30 to $90. The rest is knowing how to hold the gate square while it goes on. That is experience you pay for once or pay for twice.

Post Reset and Gate Remount Costs

A gate post reset in Prosper runs $380 to $900 per post in 2026. That is the honest range. The cheap end is a post that has leaned in its concrete footing but is not rotted, so the repair is dig out, plumb it, and repack with new concrete. The expensive end is a steel post corroded at the waterline inside a masonry column, or a wood post with rot below grade, where the post has to be cut out, sleeved, or replaced entirely. If the post feeds a brick or stone pillar, add $150 to $400 for careful demolition and rebuild of the column face depending on how much veneer has to come off to get the old steel out.

Prosper’s soil is clay that moves. We see post lean here more often than in areas with rocky ground, because the expansive clay swells when it rains in spring and contracts hard through August. A post set in a shallow pad with no drainage rock will work its way loose within a few wet-dry cycles. The fix that lasts is setting the post deeper and, where the layout allows, adding a cross-tie or reinforcement to the second post so the gate does not lever against one point. We do that on maybe a third of the post resets we quote in Star Trail and Light Farms, and it adds real life to the repair.

A full gate remount, where we pull the gate off, reset both posts or replace the hinge-side structure, and rehang with new hardware, lands $550 to $1,100 on average. That includes the alignment work most people do not see: kerfing the pickets if needed, shimming the hinges so the gate hangs square in both open and closed positions, and adjusting the latch strike so the gate closes with one finger instead of a shoulder shove.

Weld Repair Costs and Why Location Matters

Weld repair pricing in Prosper runs $90 to $240 per repair point on a gate frame. A single cracked weld at a corner where the frame meets a picket is a $90 to $130 fix. A full corner rebuild where rust has eaten the tube steel and we need to cut back to good metal, weld in a patch, and re-coat is $180 to $240. We weld on site, right in the driveway, because hauling a gate to a shop adds costs the line item never shows: a trailer rental or a two-man lift out and back, the risk of twisting the frame during transport, and the labor to remount and realign a gate that was perfectly square before it left. Plus your driveway sits open, or your gate lays in the yard, while the shop gets to it next Tuesday.

On-site welding is not a convenience. It is the difference between paying one trip of labor and paying for dismantle, transport, storage, and re-hang. When you compare a $240 on-site weld to a $140 shop weld, the shop weld is not cheaper. You are just paying the same dollars somewhere else, and the gate is gone for a week. We carry a mobile rig for a reason. The gate stays put. The repair happens where the problem lives.

Not every weld is worth doing. If the frame has five rust holes and the bottom rail crumbles when you tap it, welding patches onto that is lipstick. We will tell you that plainly and show you the metal before we ever strike an arc. Sometimes the repair-first answer is replacement, and the honest contractor says so. Hal’s been at this since 2001, and his name is on the shop. He does not patch a frame that will fail again before the season changes.

For a broader look at what gate work covers, see our Gate Repair in Prosper page.

Opener and Motor Replacement Costs

Opener replacement on a Prosper gate in 2026 starts around $650 for a basic single-swing arm and reaches $2,400 for a heavier operator on a large custom gate with a battery backup and a heavier duty cycle. The motor is only part of that number. A mid-range LiftMaster or FAAC swing arm is $300 to $600. The labor to remove the old arm, mount the new bracket, set the open and close stops, wire the safety inputs, and run the full open-close cycle test is two to three hours minimum. If the gate is 14 feet and solid steel, the opener has to work harder, so you buy a bigger motor and the labor to tune it right goes up.

We service all the major brands homeowners in Prosper already have: LiftMaster, FAAC, BFT, and Linear among them. If your existing arm is still good and the motor is fried, a motor-only swap on a LiftMaster or FAAC swing operator lands $280 to $520 depending on the model. That is half the price of a full operator replacement and usually the right call if the arm is leak-free and the gearbox is quiet. We test the capacitor and the limit switches before we quote, because a dead capacitor is a $40 repair that gets misquoted as a $600 replacement more often than you would believe.

Solar-powered openers and battery-backed systems in newer Prosper neighborhoods with alley-loaded gates are the biggest variable. If your gate runs on a solar panel and a battery bank, the battery set is a wear item. A replacement pair of 12V gel batteries installed runs $220 to $400, and if the solar panel itself is shaded out by a new fence or a taller hedge, the panel needs relocating or a bigger panel installed. We check panel output with a meter before touching the motor, because in our experience, half of the “dead opener” calls in Prosper are dead batteries with an undersized panel.

For more detail on operator work specifically, visit our Gate Motor & Opener in Prosper page.

Keypad, Receiver, and Accessory Repair Costs

Keypad replacement in Prosper runs $120 to $260 installed. The keypad is $40 to $120 depending on whether it is a basic 12-key wired unit or a wireless model that pairs with the opener. The rest is programming, mounting, and testing at the gate and from the street. Receiver board swaps are $150 to $320 depending on brand and whether the receiver is integrated into the opener cabinet or is a standalone box. Integrated units cost more because you are inside the operator, which adds a half hour of careful disassembly and reassembly on a LiftMaster or FAAC cabinet.

Common accessory repairs we handle in Prosper:

• Safety edge replacement: $140 to $280 installed. A worn safety edge that has separated from its track is a safety issue on a powered gate, not just a convenience item. If the edge is cracked or has been hit by the gate closing too hard, it should be replaced before it fails to reverse when it should.
• Loop detector service: $180 to $350 for a new loop detector and induction loop where a saw cut in the driveway exists. If the loop has to be recut and resealed, add concrete saw work.
• Remote programming and replacement: $30 to $90 for a replacement remote and pairing, depending on whether it is a fixed-code or rolling-code unit.
• Latch and lock repair: $80 to $200 for a new mechanical latch or mag lock adjustment on a pedestrian gate.

The keypad and receiver work is where we see most of the “bundled quote” games. A contractor will quote $650 for “keypad service and opener tune-up” and the homeowner cannot tell what is parts and what is labor. Ask for the line items. We give them to you without you having to ask.

What After-Hours Service Actually Costs in Prosper

An after-hours gate call in Prosper runs 1.5 to 2 times the regular rate. That is standard for any trade, and it is legitimate when it reflects a real cost: a technician leaving home at 9 p.m., a drive across the county, and a repair done by flashlight or temporary work lights. What makes an after-hours charge real versus dressed-up is whether the contractor tells you it before they show up. We do. The rate is agreed before the truck moves. No one gets a surprise invoice at the gate at midnight.

What you should watch for is an “emergency dispatch fee” that gets added on top of the after-hours rate and then the repair rate on top of that. That is three layers of billing for one trip. Our after-hours rate is the repair rate adjusted upward for the hour. That is it. No dispatch line, no convenience surcharge disguised as an emergency fee.

How to Read a Gate Repair Quote

A gate repair quote should tell you three things: what is broken, what will be done, and what it costs in parts and labor. If it only tells you the third, call someone else. Here is the step order we recommend when a Prosper homeowner hands us a competing quote and asks us to look at it:

1. Look for the diagnosis. Does the quote name the actual failing component, or does it say “gate repair” like the whole gate is a single vague unit? A real quote says “replace right hinge set on swing leaf, weld new bracket to post.” A vague one says “repair gate.”
2. Look at the parts line. Is the opener or hinge set named by brand and model? If the quote says “operator” with no brand, you cannot compare it to anything. We name the part on the invoice. If it is a LiftMaster LA400, it says so.
3. Look at the labor line. Is labor itemized separately from parts? If the quote bundles them into one number, ask for the split. A bundled quote hides whether you are paying $100 for a part and $500 for an hour of work, or $450 for the part and $150 for the labor. You have a right to know.
4. Check for the post, not just the hinge. Does the quote mention the post at all? A hinge quote on a sagging gate with no mention of the post condition is incomplete. We include a post check on every hinge quote we write.
5. Confirm the price is fixed. In writing. Before work starts. If the contractor says the quote could change “depending on what we find,” that is a legitimate phrase for hidden rot, but it should come with a maximum. We give a not-to-exceed number on anything where the true extent is hidden until we open it up.

Hal’s crew does free second opinions on any written estimate in Prosper. Bring us the quote and we will walk it line by line, because a quote is either a map of the repair or a bill of fog. The difference matters.

Repair Versus Replacement: The Cost Math

For the three gate types most common in Prosper’s master-planned communities, here is the repair-or-replace math with real component pricing, not round numbers.

Steel tube driveway gates with wood or composite infill. A new six-foot by eight-foot leaf with steel frame and wood fascia runs $700 to $1,400 installed. Repairs on these gates are almost always worth it if the frame is solid. A $280 weld and repaint, or a $220 hinge set, extends the gate five to eight years. The replacement threshold is when the frame has rust through in two or more corners or the bottom rail is gone. We see that most often on gates that were installed with no weep holes, so water sat in the rail for a decade.

Ornamental iron pedestrian gates. New ornamental gates run $600 to $1,200 for a standard walk gate. These gates rarely need full replacement. They are mostly air. The failures are bent pickets, cracked weld points, and sag from a failed post. A $180 weld and a $400 post reset brings one back to like-new for under $600. The only time we recommend replacement is when the steel has been bent in a collision and the scrollwork is too far gone to true up. Even then, a good fabricator can usually rebuild the leaf for less than new.

Custom estate gates, heavy steel or board-on-board. New customs gates are $2,500 to $6,000 and up in Prosper communities like Star Trail and Whispering Farms. On these, repair is almost always the right answer, because the gate is custom-fit and replacement means matching the design, the finish, and the mounting points. A heavy custom gate with a failed roller or a bent hinge bracket is a $300 to $900 repair against a $4,000 replacement. The math is not close. We repair custom gates that other companies want to replace, and we do it with the gate in place, because you did not buy that gate to have it on a trailer.

For new gate work when replacement is genuinely the right call, see our Gate Installation in Prosper page.

Common Mistakes to Avoid

• Accepting a hinge quote without a post check. A hinge on a moving post is a donation, not a repair. Ask whether the post was checked with a level before the quote was written. We check every time.
• Comparing quotes by bottom line only. A $240 quote and a $620 quote for the same gate are usually not quoting the same job. Read what each one actually proposes to do. The gap usually tells you who found the real problem.
• Paying for a “full opener replacement” without testing the capacitor and batteries. Two of the most common dead-opener calls in Prosper are a $40 capacitor and a $220 battery bank. Both are testable in ten minutes. Ask why the whole operator needs replacing before you authorize it.
• Letting someone haul your gate to a shop without seeing the total cost of that decision. Add the dismantle, the trailer time, the risk of frame twist, and the re-hang alignment. The shop weld price looks cheaper until you count the hidden bill.
• Accepting a bundled parts-and-labor quote without asking for the split. If a contractor will not itemize, walk. Itemizing is not a courtesy. It is the difference between a bill you can verify and a number you have to trust.
• Waiting until the gate drags to call. A gate that rubs at the latch wears its hinges and its post faster than one that closes clean. The $180 hinge job you do this month beats the $700 post reset you do in January.

When to Call a Professional

Call a professional when the gate drags, when it closes faster than it should, when the opener hums but the gate does not move, when the keypad works intermittently, or when you see rust blooming at a weld. Powered gates with strong springs and opener arms can hold serious energy, and a gate that slips while a person is under it is not a lesson you want to learn twice. Some gate components store enough tension to cause real injury if they release the wrong way. That is not a weekend project. Our Gate Repair services include free estimates in Prosper, with a live person on the phone around the clock. Call (979) 291-0947 and we will come look at it, tell you what is actually wrong, and put the price in writing before anything gets touched.

Frequently Asked Questions

The Bottom Line

Gate repair pricing in Prosper tells you more about the contractor’s diagnosis than the contractor’s mood. A $200 quote and a $600 quote for the same gate are usually not the same job at all. Read the line items. Check the post. Ask whether the opener was actually tested. Compare the total cost of a shop weld against a driveway weld and count the lost use. In a market where gates range from $700 steel panels to $6,000 custom estate builds, the repair price that lasts is the one that started with a real look at the actual failure, not the one that fit a number to a symptom. We have been doing gate work in Prosper since 2001, the price is on paper before we touch anything, and it is the same price when the job is done. For more guides & resources, visit our blog.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Prosper since 2001.