Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Allen
A gate that won’t open, sags on its hinges, or grinds halfway down its track isn’t something to put off. In Allen, a stalled gate means a car stuck in the driveway, a neighborhood entrance blocked, or a property left unsecured overnight. Most gate repairs in Allen run between $180 and $750 depending on whether we’re talking about a hinge rebuild, a full re-alignment, or a new circuit board for an automatic operator. Call (979) 291-0947 and you’ll get a live person, not a voicemail, and most Allen calls are scheduled within one business day.
Why Gatewood Fence & Gate Is Allen’s Preferred Gate Repair Company
Gatewood Fence & Gate has been owned and operated by Hal Gatewood since 2001. The name is on the shop, the address is published, and the license number is right there for anyone to check. We’re not a national outfit that cycles through subcontractors, and we’re not a call center three states away. When you call about a gate repair in Allen, you’re talking to someone who knows this area, these neighborhoods, and the particular ways gates fail here. Our Gate Repair team fixes what other companies want to replace, and we weld on site so your gate never leaves your driveway.
Allen homeowners call us for a few reasons. They’ve been burned by a company that quoted one price on the phone and handed them a different number at the door, and they want someone who will actually show up in the window they promised. They want a face they’ll see again at the hardware store. Hal’s name and reputation walk into every Allen job with him, and the 90-Day Done Right Promise is stamped in writing on every invoice. If it isn’t done right, one call brings us back. No runaround, no argument.
Our Gate Repair Services in Allen
Gate Realignment in Allen
This is the spine of our work in Allen, and for a specific reason: the Blackland Prairie clay under this city swells and shrinks with every wet-dry cycle. Posts that were plumb five years ago have shifted, and a slide gate that used to glide now drags mid-travel or stalls entirely. We re-align the track, re-set the rack and pinion, and adjust the operator’s limit settings so the gate stops binding. Realignment on a typical Allen slide gate runs $180 to $400 depending on how far the posts have moved and whether the track needs re-leveling.
Automatic Gate Repair in Allen
Automatic gate operators in Allen are failing in clusters right now. The master-planned communities built out from the mid-1990s through the 2010s, and those automated operators are now 15 to 25 years old. Capacitors dry out, circuit boards cook in summer heat, and wiring harnesses degrade under UV exposure. We service FAAC, BFT, Linear, and Viking operators regularly in Allen and stock parts for all of them. A typical operator repair in Allen is $250 to $600, and the price is quoted and agreed before any work starts.
Hinge & Post Repair in Allen
A gate sags in the hinge post, not in the middle, and that’s where we start. Clay soil movement puts lateral pressure on hinge posts, slowly rotating them out of position until the latch no longer lines up and the gate scrapes the ground. We excavate around the post, set it back to plumb with fresh concrete, and rebuild or replace the hinge assembly. In Allen, expect a hinge and post repair to run $250 to $500 per post. We do the welding on site, so the gate stays in your driveway and the fix is done fast, not in a shop across town.
Electric Gate Repair in Allen
Electric gate problems in Allen usually fall into one of three buckets: dead circuit boards from heat or power surges, wiring that’s been chewed by rodents or cracked by UV, or limit switches that have drifted out of adjustment. Allen’s summer temperatures regularly exceed 105°F, and that kills electronics faster than anywhere with milder weather. Our electric gate repairs for Allen homes typically run $150 to $350 for wiring and component-level fixes, and $300 to $650 when a full circuit board replacement is needed. We also offer a free second opinion on any written estimate you’ve received from another company, so you can compare apples to apples before making a decision.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allen
Our team is certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. Because these operators are common across Allen’s HOA communities, we keep components and common replacement parts on hand for quick turnaround. That means when your BFT operator dies on a Sunday evening in Twin Creeks, we’re not waiting five days for a part to ship in from a warehouse. If we have it, we’ll be there fast. If we don’t, we’ll tell you before we ever schedule the job. We’ll also walk you through which older operators are still worth repairing versus which ones have reached the end of their service life, because spending $400 repairing a 20-year-old board that’s already failing in three other ways doesn’t make sense, and we’ll tell you that plainly.
Common Gate Repair Problems We See in Allen Homes
- Clay soil shifting the gate posts. Allen sits on expansive clay that swells after rain and shrinks during drought. Every cycle applies torque to the posts, and over three or four years a gate that was installed perfectly starts binding, stalling, or refusing to close all the way. If your gate scrapes the driveway or the latch won’t line up, the post has moved.
- HOA color and profile mismatches. Many Allen HOA communities, including Twin Creeks, write exact iron panel profiles and powder-coat shades into their deed restrictions. A quick weld repair with a slightly different picket or an off-color paint job can trigger a forced redo, and sometimes a fine. We pull the architectural guidelines before ordering materials. Most out-of-area contractors don’t bother, and it costs homeowners real money.
- Slide gates stalling on tight driveways. Allen’s tighter lots, especially in older subdivisions where shared driveways are common, leave no room for a swing gate. That means slide gates, and slide gates rely on clean tracks and properly aligned rack and pinion systems. When the track drifts out of level or the pinion wears, the gate drags and stalls mid-travel.
- Heat-related circuit board and wiring failures. Summer in Allen regularly pushes past 105°F, and that accelerates UV degradation of wiring harnesses, rubber seals, and circuit boards. We see a spike in dead operators every July and August, and many of them could have been caught earlier with a simple inspection. If your gate is slow, hesitant, or making new noises, that’s the warning sign to call before it quits entirely.
Pricing for Gate Repair in Allen, TX
The most honest way to talk about gate repair pricing in Allen is to give you real numbers, because that’s what you need to make a decision. A basic hinge rebuild or latch replacement typically runs $180 to $350. Gate realignment on a slide gate runs $180 to $400. Automatic operator repairs run $250 to $600 depending on the part and the brand. Full circuit board replacement is $300 to $650. The quote we give you is the price you pay, agreed in writing before any work starts. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (979) 291-0947 for an exact quote. Estimates are free.
We Also Serve Cities Near Allen
Gatewood Fence & Gate is based in the Dallas-Fort Worth area, and our crews serve Allen and the surrounding communities regularly. If you’re in Plano, McKinney, Prosper, or The Colony, we likely have a service day near you within the week. The same 90-Day Done Right Promise applies wherever we go.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Allen
No, and you shouldn’t let anyone try. Allen HOA communities like Twin Creeks have architectural review processes that require written approval before any gate or fence work that changes materials, colors, or profiles. But we know how to navigate that process. We pull the HOA’s architectural guidelines before we order materials, so when the gate is repaired it actually passes review. Many Allen homeowners call us after another company already did the work and the HOA flagged it for a mismatched picket or off-color finish. That’s a second bill for the same gate, and it’s completely avoidable. If you’re not sure whether your repair needs HOA approval, call (979) 291-0947 and we’ll help you figure it out before you spend a dime.
Because the clay soil under Allen expands when it gets wet, and that pushes your gate posts out of alignment. The track drifts out of level, the rack and pinion stop meshing cleanly, and the operator’s limit settings are now fighting a gate that’s physically binding. It’s not the rain itself, it’s what the rain does to the ground under the posts. We fix this by re-setting the posts, re-leveling the track, and re-aligning the rack and pinion. In some cases we also install a deeper post footing so the next wet season doesn’t do the same thing again. Call (979) 291-0947 for a realignment quote, usually $180 to $400 for a typical Allen slide gate.
Yes. Allen summers routinely exceed 105°F, and that heat kills circuit boards, dries out capacitors, and cracks wiring insulation. We see a surge of operator failures every July and August. The heat itself isn’t usually the direct cause, it’s the accumulated damage from years of thermal cycling that finally makes a component fail on the hottest day of the year. A typical circuit board replacement in Allen runs $300 to $650 depending on the brand, and we can usually get the part same-week. Call (979) 291-0947 if your gate is running slower than usual or making new noises before the next heat wave hits.
We stage the repair so the driveway is never fully blocked, and we plan the work around the access needs of both homeowners. On a recent slide gate replacement in Twin Creeks, we replaced a failing LiftMaster operator on a shared driveway where the HOA required the new motor housing to match the community’s dark bronze iron finish. Our tech pulled the architectural guidelines first, swapped the unit, and re-aligned the rack and pinion, all while keeping the driveway open for both homeowners to come and go. When space is so tight that we can’t leave the gate mid-repair overnight, we schedule the job for a single day and finish it. Call (979) 291-0947 and we’ll tell you exactly how we’d handle your specific driveway before we ever schedule the job.
Almost always. A gate sags because the hinge post has moved or the hinges themselves have worn, not because the panel has failed. Fix the panel without addressing the post and you’ll fix it twice. We rebuild or replace the hinge assembly, re-set the post if the clay has moved it, and re-weld any broken pickets on site. A full panel replacement is rarely necessary, and we’ll tell you that honestly even when it would make us more money. A typical sagging gate repair in Allen runs $250 to $500 per post, depending on how far it’s moved and whether new hinges are needed. Call (979) 291-0947 for a straight answer about your gate.
Your Gate Repair Team in Allen
When you call Gatewood Fence & Gate, you’re hiring Hal Gatewood and a crew that’s been at this since 2001. We answer the phone with a live person 24 hours a day, every day. We quote upfront, we do the welding on site so your gate never leaves your driveway, and we put the 90-Day Done Right Promise in writing on every job. If you’re in Allen and your gate is sagging, stalling, or dead entirely, call (979) 291-0947 for a free estimate. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Allen since 2001.