Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in Prosper, TX
If your gate is dragging on the driveway or won’t latch anymore, the problem is almost always in the hinges or the post, not the gate panel itself. Hinge and post repair in Prosper typically costs between $150 and $450, depending on whether we need to re-weld a hinge, reinforce a leaning post, or reset a concrete footing that has shifted in our local clay soil. We handle these repairs on-site, usually within a single visit, so you aren’t left with a security gap in your fence line.
I am Hal Gatewood, and for the last 29 years, I have been fixing what other companies try to replace. When you call (979) 291-0947, you aren’t getting a call center or a random dispatch team; you are talking to the person who will be standing in your driveway. We specialize in Gate Repair in Prosper, and we know that a gate is only as strong as its anchor. If you fix the gate panel but leave the post that is pulling out of the ground, you are just waiting for the same problem to come back. We don’t do that. We fix the root cause, weld it right, and back it with our 90-Day Done Right Promise.
When You Need Hinge & Post Repair
You don’t need to be a welder to know when your gate is failing. Most of the time, the signs are visible long before the gate falls over entirely. Living here in Prosper, we see a lot of movement in the ground, especially after a dry summer followed by a wet spring. This ground shifting is the enemy of a sturdy gate post.
- The Dragging Gate: If your gate leaves a crescent-shaped scratch on your concrete or pavers, the hinge is likely sagging or the post has leaned. This isn’t just an annoyance; it is slowly grinding down the bottom of your gate and putting unnecessary strain on your gate motor.
- The Gap at the Latch: If your latch doesn’t line up anymore, the post has almost certainly moved. You might be tempted to just move the latch plate, but that is a temporary fix. You need to address the post alignment before the gate becomes impossible to close.
- Visible Cracks in the Concrete: If you see spiderweb cracks radiating from the base of your gate post, the footing has likely failed. This is common with heavy, ornamental iron gates that catch the wind.
- Hinge Bind: If your gate makes a loud screeching or popping sound when it opens, the hinges are likely out of alignment or under-greased to the point of metal-on-metal wear. We can often realign these or weld on new, heavy-duty hinges without replacing the entire setup.
- Rust at the Connection Points: We see this often with older iron gates. The weld where the hinge meets the post rusts through, leaving the gate hanging by a thread. We cut that out, prep the metal, and weld on a new, clean hinge plate.
If you see any of these signs, don’t wait until the gate falls. A falling gate is a safety hazard for pets and children, and it can cause expensive damage to your driveway or your vehicle. Call us at (979) 291-0947 for a free estimate.
Our Hinge & Post Repair Process
I don’t believe in hauling your gate off to a shop unless it is absolutely necessary. Most repairs can be done right where the gate stands. When I or my crew come out to your property, we follow a specific process to make sure the fix lasts.
- Assessment of the Load: We start by checking the weight of the gate against the current post diameter and depth. Sometimes a gate was installed with a post that was simply too small for the weight of the material.
- Structural Reinforcement: If the post is leaning, we don’t just pull it back. We excavate, straighten, and reinforce the footing. In some cases, we add a support brace or a secondary steel sleeve to the existing post to keep it from flexing under the weight of brands like Viking or FAAC motors.
- Hinge Replacement and Welding: We remove the failing hardware. If the original weld has cracked, we grind it down to bare metal, ensure the post is plumb, and weld on new, high-quality hinges. We use industrial-grade hinges that can handle the torque of a motorized gate.
- Alignment and Clearance: We adjust the gate so it has the proper clearance from the driveway. A gate that drags is a gate that breaks. We set it so it swings freely without friction.
- Final Testing: We cycle the gate multiple times to ensure the latch engages perfectly and the motor is not straining. We don’t leave until you are satisfied that the gate moves as smoothly as the day it was new.
Every job we do comes with our 90-Day Done Right Promise. If something isn’t right, you call me, and I will come back out to make it right. That is the accountability you get when you work with a local, owner-operated shop.
Hinge & Post Repair Pricing in Prosper
I believe in upfront pricing. You shouldn’t have to guess what a repair will cost, and you certainly shouldn’t have to worry about a “trip charge” just for me to look at the gate. We don’t have those. We offer honest, transparent pricing based on the work required to fix it permanently.
| Service Type | Estimated Range |
|---|---|
| Simple Hinge Re-weld/Alignment | $150 - $250 |
| Post Reinforcement/Sleeve Install | $250 - $400 |
| Full Post Reset/Concrete Work | $350 - $600+ |
These prices are estimates. The final cost depends on the size of your gate, the type of material (wrought iron, steel, or aluminum), and the condition of the existing post. If you have a written estimate from another company, I will give you a free second opinion on it. We also offer $40 off any repair over $200, and we have a standing 10% discount for seniors and veterans. If you need Gate Repair beyond just the hinges, we can handle that too.
FAQs - Hinge & Post Repair
Is it cheaper to repair the post or replace it?
In most cases, it is much cheaper to reinforce or reset an existing post than to rip it out and pour new concrete, provided the existing post is still structurally sound. If the post is badly rusted through or bent beyond repair, we will tell you honestly that replacement is the only safe option. Call (979) 291-0947 and we can take a look at it for you.
Can you repair gates from brands like Linear or BFT?
Yes, we are certified to service nine major gate brands, including Linear, BFT, and others. While the brand usually refers to the motor and access control system, the physical gate hinges and posts are standard steel components that we can weld and repair regardless of the motor brand attached to them.
Why is my gate sagging even though the hinges look fine?
The problem is likely the post itself. Over time, especially in the soil we have here in North Texas, the weight of a heavy gate can cause the post to lean toward the driveway. Even a quarter-inch of lean at the top of the post can translate into several inches of sag at the latch side of the gate. We can plumb the post and weld it into place to stop the sag.
Is it safe to weld on a gate while it is still standing?
Yes, but you have to know what you are doing. Welding involves high heat and bright light, and you have to be careful not to damage the gate motor or the paint on the surrounding fence. I have been doing this since 2001, and we take every precaution to protect your property and ensure the weld is strong. If your automatic gate is under high tension, we will ensure it is properly supported before we touch it with a torch.
If your gate is struggling, don’t put it off. A small hinge issue today becomes a broken post tomorrow. Call us at (979) 291-0947 to schedule a time for us to come out. We are proud to be your local choice for gate service, and we stand behind every weld we make. You can also visit our home page to see everything we do.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Prosper.