Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Prosper?
Gate parts and welding repairs in Prosper generally cost between $150 and $450 for standard onsite work, depending on the complexity of the metal fabrication and the parts required. Minor welding repairs, such as reattaching a hinge plate or fixing a broken latch, usually sit on the lower end of that range, while extensive repairs on rusted-out gate frames or custom fabrication can run higher. Since we handle these repairs on-site in Prosper, you avoid the cost and hassle of hauling your gate to a shop.
Gate Parts & Welding Cost Breakdown (2026)
When you call us for a quote, we don’t guess. We look at the metal, the stress points, and the parts involved. The following ranges reflect typical repair costs in our local Prosper market, where materials and labor fluctuate based on the specific condition of the gate.
| Service Type | Estimated Price Range |
|---|---|
| Basic Hinge or Latch Welding | $150 - $250 |
| Frame Reinforcement & Bracing | $250 - $450 |
| Gate Post/Hinge Re-alignment | $200 - $400 |
| Hardware Replacement (Parts + Install) | $180 - $350 |
| Custom Fabrication/Metal Patchwork | $300 - $600+ |
These numbers cover the labor for the welding itself and the standard parts we carry on our trucks. If your gate requires specialized components for brands like LiftMaster, FAAC, or DoorKing, those parts are billed separately, but we’ll tell you exactly what those costs are before we strike an arc. We also offer a permanent 10% discount for seniors and veterans on these services.
What Affects Gate Parts & Welding Pricing in Prosper
A gate doesn’t just break for no reason. In North Texas, the soil shifting and the heat cycles are usually the culprits. When we quote a job, we look at these specific factors:
- Metal Thickness and Rust: If we are welding over heavy oxidation, we have to grind down to clean metal first. The more prep work required to get to solid steel, the more time it takes.
- Accessibility of the Damage: If the gate is hanging in a way that makes it impossible to reach the break with a welding torch without removing the gate, that adds labor time. We prefer to do the work right where it stands.
- Soil Movement in Prosper: We see a lot of gates in neighborhoods near the Dallas North Tollway where the ground has shifted significantly. If your post has moved, welding the gate won’t fix the root cause. We have to address the alignment first.
- Hardware Compatibility: If you are running older systems like Viking or Elite, finding specific replacement parts can be trickier than modern brands like Ghost Controls. We stock parts for nine major brands to keep costs predictable.
- Complexity of the Fabrication: A simple tack weld is fast. Rebuilding a structural cross-brace that has snapped under the weight of a heavy iron gate is a structural repair that requires more welding rod, shielding gas, and time.
Why On-Site Welding Saves You Money
There is a common misconception that you need to take a gate to a fabrication shop to get a good weld. That is rarely true for residential gates. When you haul a gate to a shop, you are paying for the time it takes to remove the gate, the trailer rental or truck time to haul it, the shop’s overhead, and the re-installation labor.
At Gatewood Fence & Gate, we bring the shop to your driveway. We carry portable welding rigs designed to handle structural repairs on-site. By staying in your driveway, we cut out the middleman and the extra handling. It’s faster, it’s cheaper, and it allows us to fit the gate to your specific post alignment rather than trying to fit a gate to a shop bench.
How to Save on Gate Parts & Welding
You don’t need to overpay to get a gate that actually opens and closes. Here are a few ways we help our neighbors in Prosper keep costs down:
- Call for a Second Opinion: If you have a written estimate from another company that seems high, call us at (979) 291-0947. We offer free second opinions on any written estimate. If we can fix it for less, or if we see a repair where they recommended a full replacement, we will tell you.
- Bundle Your Repairs: If your gate needs welding and your access control system is acting up, tackle them at the same time. We don’t charge a trip fee inside the county, but grouping your service needs saves you time.
- Take Advantage of Discounts: We keep our pricing straightforward. We offer $40 off any repair over $200. This is a standing offer, not a seasonal gimmick.
- Don’t Ignore the Sag: A gate that drags on the concrete is essentially grinding itself apart. The longer you wait, the more metal fatigue occurs. A quick weld on a hinge plate today is significantly cheaper than a full frame rebuild six months from now.
FAQs - Gate Parts & Welding Cost
How much does it cost to fix a gate that drags on the ground in Prosper?
Fixing a dragging gate usually costs between $200 and $400, depending on whether the issue is a failed hinge, a bent post, or a frame that has lost its structural integrity. We always start by checking the post alignment, because if the post is leaning due to the Prosper soil, welding the gate will only provide a temporary fix. Call (979) 291-0947 for an exact quote.
Can you weld my gate without taking it off the hinges?
Yes, in the vast majority of cases, we perform the welding right on-site with the gate in place. This saves you the cost and trouble of having to transport the gate to a shop. We use specialized equipment to ensure the weld is strong and the finish is clean, all while protecting your driveway and landscaping.
Is it cheaper to repair a gate or replace it?
Repair is almost always cheaper, and that is our philosophy. We see too many companies trying to sell a full gate replacement when a few hours of welding and some minor hardware adjustments would have fixed the problem. Unless the metal is completely rusted through or the structural integrity is beyond saving, we can usually repair it. Call (979) 291-0947 for a free estimate before you spend money on a new gate.
Do you charge for a service call?
We do not charge a trip fee if you are located inside the county. We believe in upfront pricing. When we come out to look at your gate, we provide a clear, no-hassle estimate for exactly what the repair will cost. If you have questions, call (979) 291-0947 and speak to a live person who can help.
How quickly can you get to my home in Prosper?
We are locally owned and owner-operated, which means we aren’t waiting on a corporate dispatch center. We prioritize repairs that impact your security, and we can often schedule service quite quickly. Since we answer the phone 24 hours a day, 7 days a week, you can call (979) 291-0947 anytime to see what our current schedule looks like.
Safety Note on Gate Repairs
Gate systems are heavy and under significant tension, especially if you have a gate opener or high-tension springs involved. A falling gate can cause serious injury, and high-voltage wiring in gate motors is not a DIY project. If you notice your gate is binding, moving unevenly, or if the metal frame shows signs of cracking, do not attempt to force it open or closed. Call a professional who understands the structural dynamics of gate systems. We are here to help you get it fixed safely.
Get Your Gate Fixed Right the First Time
We have been doing this since 2001, and we have learned that the best way to run a business is to answer the phone, show up when you say you will, and stand behind your work. Every job we perform comes with our 90-Day Done Right Promise. If it isn’t done right, we make it right. No runaround, no excuses.
Whether you need a structural weld on a heavy iron gate or you need someone to troubleshoot a finicky access control system, we are ready to help. We serve the Prosper area with the kind of service that makes neighbors recommend us to neighbors.
Give us a call at (979) 291-0947. We are happy to provide a free estimate and talk through the best way to get your gate back in working order.
Pricing reflects the Prosper market as of 2026. Gatewood Fence & Gate offers Gate Parts & Welding services and free estimates - call (979) 291-0947.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Prosper since 2001.
What Our Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks