Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Allen
Gate Installation - Allen usually means one of three things: a hinge post that has shifted out of plumb, a swing gate that won’t latch because the panel sagged, or an HOA that needs style-matched iron work before anything gets touched. A hinge replacement here typically runs $145-$285, post replacement $380-$750 depending on footing depth, custom welding $120-$400 depending on the repair, and matching an Allen HOA’s exact powder-coat finish usually adds $60-$140. If your gate is hanging crooked, making noise, or won’t close against the latch, call (979) 291-0947 and we’ll tell you honestly whether it’s a weld job, a post job, or a part we can replace that same visit.
We’re Gatewood Fence & Gate, and we’ve been fixing gates since 2001. Hal Gatewood’s name is on the shop. The person who answers when you call is the person who knows what your gate needs. That matters in Allen, where a lot of the gate hardware out there is 15 to 25 years old and reaching the end of its life at the same time.
Why Gatewood Fence & Gate Is Allen’s Preferred Gate Parts & Welding Company
Allen homeowners call us because we weld on site. The gate stays in your driveway. We don’t haul it to a shop across the county, because a gate that gets hauled off comes back with new problems and a bill for labor that didn’t need to happen. Hal has been owner-operated since 2001, and our Gate Parts & Welding work carries the 90-Day Done Right Promise in writing on every invoice: if it’s not done right, one call brings us back.
We know Twin Creeks, Watters Crossing, Star Creek, and the older neighborhoods off Greenville Avenue near Bethany Drive. We know that Allen sits on Blackland Prairie clay that moves more than people expect. We know that HOA architectural committees here take gate work seriously. And we answer the phone with a live person, 24/7, not a voicemail. That’s not a tagline. It’s how we’ve operated for 29 years.
Our Gate Parts & Welding Services in Allen
Hinge Replacement
Most hinge replacements in Allen aren’t really hinge failures. The hinge gets blamed because it’s the part you can see, but the reason it failed is usually underneath: the post it’s welded to has moved. Allen’s expansive clay soil swells after rain and shrinks during drought, and that cycle slowly pushes posts out of plumb. We cut out the old hinge, check the post with a level, and tell you the truth about whether the hinge alone will fix it. A typical hinge replacement runs $145-$285, and we quote the price before any work starts.
Post Replacement
When a post has shifted enough that the gate binds or won’t latch, replacing the hinge won’t hold. We pull the old post, dig the footing deeper than the original, pour new concrete, and weld the hinge brackets back on at the correct height. In Allen, deeper footings matter more than most places because of the clay. Post replacement here usually runs $380-$750, depending on post diameter, gate weight, and whether the gate is automated. If your gate is automated, post movement also throws off our Gate Motor & Opener in Allen track, so we check that while we’re there.
Rail Repair
Rails crack, corrode, or bend on gates that have been sagging for a while, especially on ornamental iron gates in mid-to-upper-tier Allen neighborhoods. We’ll repair a rail with a welded reinforcement rather than replacing the whole panel when the panel is still sound. Rail repairs typically run $180-$400. We match the repair to the panel profile so a picky HOA inspector won’t flag it.
Custom Welding
This is where Allen gets specific. Many HOA-governed communities here, Twin Creeks included, have picket profiles and powder-coat shades written into deed restrictions. You can’t walk into a big-box store and buy a gate section that matches. We weld new sections, patch damaged pickets, reinforce hinge points, and match the existing finish. Custom welding in Allen typically runs $120-$400 per repair area, plus finish matching if your HOA requires a specific color. Pull the HOA’s architectural guidelines before you buy anything. We’ll help you do it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allen
We service the major gate operators and hardware brands you’re likely to find on Allen properties: LiftMaster, FAAC, BFT, Mighty Mule, and Ghost Controls service in Allen are the ones we see most often in this market, and we’re certified to service them all. When you call for a parts or welding job, we carry common replacement hardware on the truck so we can finish most hinge, rail, and latch work in one visit. If we don’t carry it, we know where to get it fast and we’ll give you the source.
Common Gate Parts & Welding Problems We See in Allen Homes
- Gate posts moving on Blackland Prairie clay. Allen’s soil expands when it’s wet and shrinks when it’s dry. The post moves a fraction of an inch, the hinge geometry shifts, and the gate starts dragging or failing to latch. Welding a new hinge onto a moving post just breaks again in a season.
- HOA-required finish matching after a repair. A lot of Allen homeowners replace a damaged gate section with a slightly different picket style or powder-coat shade, only to get a violation notice from the architectural committee. We check the community’s guidelines before we order materials, so you don’t pay for the same work twice.
- Swing gates that sag in the hinge post, not the middle. The classic mistake is reinforcing the panel when the post is the problem. Allen’s clay makes this failure mode more common than people realize, and that’s why we start at the hinge post.
- Automated slide gates whose rack and pinion jams after post movement. When a post shifts, the drive track misaligns by millimeters, and the operator tries to force it anyway. The fix is often a new welded mounting plate, not a new operator.
Pricing for Gate Parts & Welding in Allen, TX
Here are honest numbers for the Allen market. Hinge replacement runs $145-$285. Post replacement runs $380-$750. Rail repair runs $180-$400. Custom welding, including finish matching, runs $120-$400 per repair area. A service call with no trip charge inside the county gets us to your door, and the price you’re quoted is the price you pay before we start. No surprises at the door. If you have a written estimate from another company, we’ll give you a free second opinion, and every repair over $200 gets $40 off. Seniors and veterans get a permanent 10% discount.
We Also Serve Cities Near Allen
Gatewood Fence & Gate serves Allen and the surrounding communities, including Plano, McKinney, Prosper, and The Colony. If you’re in one of those cities with a gate that won’t latch or a post that has shifted, our Gate Parts & Welding crew serves the whole area. Dispatch is coordinated from our Dallas-Fort Worth office, and crews serve Allen locally.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Allen
Most Allen HOAs, including Twin Creeks and similar master-planned communities, require architectural approval for any change visible from the street, and that includes repairs that change the finish, profile, or hardware of a gate. A simple hinge replacement that matches the existing hardware usually passes without review, but a welded patch, repainted panel, or new picket style will likely need approval before the work is done. We’ll help you check your specific community’s deed restrictions before you spend anything. Call (979) 291-0947 and we’ll walk you through it.
The hinge post has moved, and the hinges were attached to a post that’s no longer plumb. In Allen, Blackland Prairie clay expands in wet spells and shrinks in droughts, and that cycle slowly pushes posts out of alignment year after year. Replacing the hinge on a shifted post fixes the symptom, not the cause. The real fix is resetting the post in a deeper footing and re-welding the hinges at the correct height. If you’ve had hinge work done recently and the gate still drops, the post is likely the problem, and we can confirm that with a level in about ten minutes. Call (979) 291-0947 for a free estimate.
Yes. We pull the architectural guidelines for your Allen community before ordering materials, and we match the picket profile, rail dimensions, and powder-coat shade to what’s already on your gate and what your deed restrictions require. In Twin Creeks and other Allen HOAs, the finish is often a textured black or antique bronze, and the exact shade matters when the architectural committee inspects the work. Getting the wrong shade means redoing the job at your cost. We do it once, correctly. Call (979) 291-0947 and we’ll tell you what’s possible for your specific gate.
The Gate Access Control in Allen photocell stops seeing its reflector, and the gate either refuses to close, reverses mid-close, or beeps continuously. A shifting post is a common cause in Allen because the clay soil moves enough to change the photocell’s angle. Sometimes the fix is re-aiming the sensor. Sometimes the post has moved enough that the mounting bracket needs to be cut off and re-welded at the correct angle. We’ll tell you which one it is before we do anything. Call (979) 291-0947.
First, we identify exactly where the property line and the HOA’s responsibility end. In Allen communities with shared entry systems, the HOA owns the entry operator and the main gate, while you own your driveway gate and its wiring. We’ll coordinate with the HOA or management company if the work touches the shared system, and we’ll handle your driveway gate independently. If your gate is on the HOA’s system, we’ll tell you who to contact and what to ask for. Either way, you get a straight answer. Call (979) 291-0947 and we’ll sort it out.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Allen since 2001.