Gate Installation in Allen - Written Price, Install Date Set

Fast, Reliable Gate Installation Across Allen

A new driveway gate in Allen typically runs $3,200 to $9,800 installed, depending on whether you’re adding automation, the width of the opening, and whether the HOA requires a specific iron profile. Most installations in Allen take one to two days on site, and we quote every job in writing before any work starts. If you’re in Allen and wondering whether your gate can be saved or needs Gate Repair in Allen or replacing, call (979) 291-0947 and we’ll come look at it ourselves.

Call (979) 291-0947

We’ve been working in Allen long enough to know which subdivisions were built when and what that means for the gate hanging at the end of your driveway. This matters more than you’d think. A gate installed in Twin Creeks in 2004 sits on different footings than one put in at Montgomery Farm in 2016, and the operator that worked fine for two decades doesn’t owe you another year just because you’re polite to it.

Key Takeaways

• Driveway gate installation in Allen averages $3,200 to $9,800 depending on size, automation, and HOA requirements
• Allen’s expansive clay soil shifts gate posts every drought-to-wet-season cycle, which means footings here need to go deeper than the generic 24-inch minimum most installers use
• Many Allen HOAs require written approval and style-matched iron panels before any gate work begins
• We pull HOA architectural guidelines before ordering materials, so you don’t get stuck redoing a rejected installation

Why Gatewood Fence & Gate Is Allen’s Preferred Gate Installation Company

Hal Gatewood has been doing this since 2001, and his name is on the shop and every invoice. That’s not a slogan. It’s the oldest accountability arrangement there is. When someone in Allen calls us about a sagging swing gate or a dead operator, the person who answers the phone knows what they’re talking about, not reading from a script.

Allen homeowners run into a specific problem that most gate companies don’t plan for: the architectural review process. Communities like Twin Creeks, StarCreek, and Waterford Parks have deed restrictions that dictate what your gate can look like, what color the powder coat needs to be, and whether the HOA has to sign off before a single post hole gets dug. We know to check that first. An out-of-area installer who doesn’t will sell you a gate the HOA rejects, and you’re the one paying to tear it out. Our Gate Installation team handles the paperwork end of this so you don’t have to figure out which form goes where.

Calls to us are answered by a live person, 24 hours a day, seven days a week. Not a voicemail tree, not a call center three states away. The same goes for the 90-Day Done Right Promise: if it’s not done right, we make it right, stamped in writing on every job. When we tell an Allen customer we’ll be there Tuesday morning, the truck shows up Tuesday morning.

Our Gate Installation Services in Allen

Driveway Gate

Driveway gates in Allen are the workhorses of the property, and most of the ones we see were installed when the subdivision was built. That means they’re now hitting the age where the operator fails, the post shifts, or the panel sags. We install new driveway gates sized to your opening, with footings sunk deep enough to handle Blackland Prairie clay that moves more than most people realize.

Pedestrian Gate

A pedestrian gate in Allen usually serves the side yard or a courtyard entry. These get overlooked because they’re smaller, but they take the same weather, the same soil movement, and the same HOA scrutiny. We build pedestrian gates that match the driveway gate’s profile so the HOA architectural committee has nothing to complain about.

Sliding Gate

Sliding gates make sense on Allen lots where the driveway is wide and the setback is short. You don’t need the swing clearance, but you do need a level track, a solid footing, and an operator sized for the gate’s weight, not the builder’s budget. We see plenty of builder-grade slide operators in neighborhoods around Watters Creek and Stacy Road that were undersized from day one. We install slide gates that actually operate smoothly, with the Gate Parts & Welding in Allen and motor sized to the panel.

Swing Gate

Swing gates dominate Allen’s mid-to-upper-tier neighborhoods, especially the ornamental iron ones in communities developed in the late 90s and early 2000s. The problem in Allen is almost always the post, not the panel. Expansive clay swells in wet months and contracts in drought, and that repeated movement walks the hinge post out of plumb. We install swing gates with deeper footings and proper hinge reinforcement so the gate doesn’t start dragging within two years.

Double Gate

Double driveway gates are common on wider lots in Allen, particularly in neighborhoods built after 2005 where three-car garages became standard. A double gate means two posts carrying load, two panels that need to meet square in the middle, and an operator or pair of operators that has to move everything together. If the two halves don’t meet square, it’s usually because one post moved. We fix the post, not just the panel. Fix the panel without the post and you’ll fix it twice.

We also install Allen Gate Access Control with safety photocells and edge sensors on every automated gate. On a double gate, that means covering both panels and the center pinch point. Some companies skip this to shave the quote. We won’t, and there’s a reason: UL 325 entrapment protection is the minimum standard for automatic gates, and we’ve seen too many original Allen installs from the early 2000s where the loop detector was never wired to it.

Trusted Brands We Service in Allen

We’re certified to service and install nine major gate brands, and in Allen we work most often with FAAC, BFT, and Liftmaster service in Allen. FAAC hydraulic and electromechanical operators show up a lot in Allen’s higher-end communities because of the heavier ornamental iron panels. BFT runs are common on slide gates in newer subdivisions along Ridgeview Drive. Linear and Viking are out there too. We stock parts for all of them, which means when we come to Allen for a repair or replacement, we’re not waiting on a parts shipment from somewhere else.

Common Gate Installation Problems We See in Allen Homes

• Builder-grade operators dying on the same schedule. Allen’s master-planned communities went up fast between the mid-90s and the 2010s, and hundreds of homes in each subdivision got the same operator. They fail around the same time, usually at the 15-to-25-year mark. We replaced a builder-grade LiftMaster slide operator on a cul-de-sac home in Twin Creeks where the original 2004 unit had seized after years supporting a gate that the shifting soil had pulled out of alignment.
• Clay soil walking posts out of plumb. Allen sits on Blackland Prairie expansive clay. It swells when it rains and shrinks in summer drought. That cycle pushes gate posts out of position every single year, and if the original footing was only two feet deep, the post moves. We pour footings that hold in this soil, not the soil in Dallas or Oklahoma.
• HOA rejections on style-matched panels. Many Allen communities have color-coded or profile-specific iron panel requirements written into the deed restrictions. A homeowner who replaces a damaged section with a slightly different picket style or powder-coat shade can be forced to redo the job at their own cost. We pull the HOA architectural guidelines before we order materials. It saves real money.
• Manual gates with no power run. During Allen’s buildout, a lot of gates were installed manual because running conduit under the driveway added cost the builder didn’t want. Adding automation later means trenching through clay to get power to the operator. We do the trenching and the conduit run as part of the install, not as a surprise line item you hear about after the gate’s already hanging.

Pricing for Gate Installation in Allen, TX

We Also Serve Cities Near Allen

Allen’s in the middle of a fast-growing band of Collin County, and we cover the cities around it too. If you’re in Plano, McKinney, Prosper, or The Colony, the same Gate Installation in Allen team that’s been pulling HOA architectural guidelines for years handles your neighborhood as well. Gates don’t stop at the city line, and neither do we.

FAQs - Gate Installation in Allen