Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Gate Parts & Welding in Prosper: What to Know First
We provide independent Linear gate parts and welding in Prosper, with most hinge, weld, and rail repairs done in one visit. You call, we come out, we tell you what it’ll cost before we touch anything, and we fix it in your driveway instead of hauling your gate off to some shop. Typical turnarounds are same-day to next-day depending on what we need to order.
This page is for Prosper homeowners who own a Linear gate opener or a Linear gate assembly and need straight answers about parts, welding, and what it actually takes to keep the thing working. Not runaround, not a sales pitch. Call (979) 291-0947 and you’ll reach a live person who can talk through what’s going on before we ever schedule a truck.
How Linear Products Fail - and How We Fix Them
- Linear LRA and LRA-I swing gate arms shearing hinge welds. These are decent openers, but the geometry matters. If the mounting plate wasn’t welded dead-on with the hinge axis, the arm fights the gate every open and close. Over time the weld at the hinge post or the plate itself starts to crack. We see this all over Gentle Creek and Windsong Ranch. Our fix is to cut the old plate off, true the gate, and weld it back on square. A new arm won’t fix a crooked pivot.
- Linear N-2500 and N-3000 slide gate rollers eating the rail. Rough roller bearings destroy the top rail, and before long the gate is skidding instead of rolling. That drag is why the operator trips its limit switch or folds a chain. You can keep replacing rollers, but if the rail is worn thin or grooved, the only real fix is cutting out the bad section and welding in new rail, then setting fresh rollers so the gate glides. We do the full repair at your place with the gate still on the track.
- Linear APeX and older DX models tearing out at the post brackets. A surprisingly common sight in the rural stretches around Prosper: the opener’s mounting bracket is held to the post with lag bolts somebody drove into soft wood or a cracked weldment. One good push of wind and the whole bracket rips out. We don’t just re-bolt it. We weld a steel backplate onto the post, set the bracket to that, and never need to come back for the same failure.
- Aftermarket circuit boards that don’t match the motor wiring. Homeowners get sold a “Linear-compatible” board online, install it, and now the gate runs for a second and stops. The logic board and the motor harness aren’t speaking the same language. Some of those boards are fine. Some are not. We match boards to the actual motor revision on your gate and we stand behind our work with the 90-Day Done Right Promise, so it either runs right or the fix is on us.
- Linear gate locks and latches welded shut by bad DIY repairs. We find this in the older Linear installations out toward Celina and Frisco: somebody had a gate that wouldn’t latch, so they just welded the latch plate solid. Now the gate doesn’t close behind the homeowners and every delivery driver leaves it swinging. We cut the sloppy weld out, rebuild the latch assembly with the right clearance, and the gate latches without needing two hands and a kick.
Our Linear Gate Parts & Welding Process
- 1
You call. A live person answers, day or night. Tell us what the gate is doing. We’ll ask about the opener, the noise, when it started. If you can read us the model number off the motor, even better.
- 2
We come out and look. No trip charge inside the county. Hal walks the gate, checks the hinges, the welds, the rollers, the opener, the limit switches. You get a straight read on what’s actually wrong.
- 3
We price it before we touch it. Parts, labor, welding time. Fixed number. No surprise invoice at the door.
- 4
We decide on parts together. For Linear openers, we use OEM parts when they’re available and when the warranty matters. For wear items like rollers and hinges, we’ll use a quality aftermarket steel part when it’s actually a better fit for the gate. We’ll tell you why we picked what we picked.
- 5
We do the work on site. Cutting, welding, grinding, setting the gate so it hangs and travels true. The gate stays in your driveway. So does the mess, because we clean it up before we leave.
- 6
We test it in front of you. Full open, full close, obstruction check, force limits. Then we hand you a written 90-Day Done Right Promise. If it’s not right, we make it right. That’s the whole deal.
What Linear Gate Parts & Welding Costs in Prosper
Real numbers, based on what we’ve actually billed in Prosper over the last few years:
- Hinge repair or replacement: $150-$350, depending on how much welding the post or the gate frame needs
- Weld repair on a cracked gate frame or post: $250-$700, depending on how far the crack runs and whether we’re reinforcing or just patching
- Slide gate roller replacement with rail repair: $200-$650, more if we’re welding in a new section of rail
- Post replacement (weld-on steel post): $400-$1,000+ once we factor in concrete, gate removal and re-hanging
- Latch and lock rebuild: $180-$400 for a proper mechanical latch and lock assembly, welded in place
What moves the price: how much cutting and grinding is needed, whether we have to pull the gate off to re-true the hinges, and whether the part is OEM Linear or a structural steel part we’re building at the shop. Every quote is called out before work starts, not after. Call (979) 291-0947 for a free estimate.
Why Prosper Homeowners Call Gatewood Fence & Gate for Linear Work
Around Prosper, Gentler Creek, Windsong Ranch, and the county roads out toward Celina, Hal Gatewood is the name folks hand to a neighbor when a gate starts acting up. He’s been doing this since 2001, when this whole stretch was still pasture and the Kroger on Preston Road was where you found out who’d gotten a new mower.
Every job starts with us listening. Then it’s on-site welding, repair-first, no pressure to replace something that’s still got years in it. If the work’s not right, our 90-Day Done Right Promise is in writing and it means Hal comes back. We also work on LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your Linear gate shares fence hardware with another brand, we handle both in one visit. We’re an independent Linear service provider, not an authorized dealer, and we keep that honest with you. Hand me your number and I’ll call you before I pull up, that way you’re not standing in the driveway waiting on me.
FAQs
Yes. We cut, weld, and grind your Linear gate right in your driveway in Prosper, whether it’s a cracked hinge weld, a sagging post, or a torn rail. The gate doesn’t leave your property.
In most cases, yes. We source genuine Linear OEM boards, arms, and mechanical parts through our local suppliers. For structural and wear items like hinges, rollers, and custom weld plates, we often build or source a better steel part and we’ll tell you why. Call (979) 291-0947 and we’ll verify your model number over the phone.
It shouldn’t, because we disconnect the controller and grounds before any welding is done. We’ve seen enough fried control boards from somebody welding a gate with the opener still wired up. We isolate the electronics first, every single time.
Same day or next day in most of Prosper and the surrounding area. If the gate won’t close and you need it secured, call us. A live person answers and we’ll find a time that works, not a six-hour window.
Most of the time, repair is cheaper and just as strong. If the frame is still straight and the hinge points are viable, we weld and re-hang. If the gate’s been hit by a car or the frame’s rusted through, we’ll tell you straight that replacement makes more sense and quote both. No pressure either way.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate, serving Prosper and nearby areas.