Linear Gate Motor & Opener Nationwide | Gatewood Fence & Gate

Linear Gate Motor & Opener in Prosper: What to Know First

Linear gate motors and openers in Prosper typically take us one visit to diagnose and most repairs are finished the same day. The honest price posture is this: we quote the number before we touch a bolt, you approve it, and that’s the number on the invoice. We’re an independent Linear service provider, not a factory warranty station, which means we fix what’s actually wrong instead of selling you a replacement board because it’s easier for us.

Call (979) 291-0947

If you own a home in Gentle Creek, Whispering Farms, or anywhere else in Prosper with a Linear opener on a swing or slide gate, this page is for you. Call (979) 291-0947 and a live person answers. No voicemail, no call center. Hal Gatewood’s name is on the shop and he’s been at this since 2001. 120 words.

How Linear Products Fail - and How We Fix Them

Linear builds solid residential operators, but every brand has its habits. Here’s what we see on Linear gate motors and openers in Prosper specifically, and what we do about it.

• Linear APeX and L-Series control boards blowing the same relay twice. The symptom is a gate that opens fine but won’t close, or closes halfway and reverses. On these boards the close-limit relay takes the abuse, and the real cause is usually a gate that’s out of balance or binding in the hinge, so the motor pulls harder and cooks the relay. We replace the relay or the board, then fix the balance issue so the new part doesn’t die the same death in six months. A new board on a misaligned gate is just donating money to the parts house.
• Linear MegaCode receivers losing signal from one specific remote. If one remote works and another doesn’t, and you’ve already swapped batteries, the problem is almost never the receiver. It’s the remote’s MegaCode ID drifting out of sync after years of use. On Linear systems every transmitter has a factory-set ID that the receiver stores. We reprogram rather than replace, and we’ll tell you straight if the remote is genuinely dead versus just out of sync. That’s a $15 fix versus a $120 part.
• Linear slide gate motors (the SL series) grinding and stopping under load. Prosper’s clay soil shifts, and a concrete pad that looked level five years ago isn’t level now. When a Linear SL operator sits even slightly off-square to the chain, the sprocket teeth catch and the gearbox eats itself. We pull the motor, shim and re-anchor it square, and replace the gear if it’s already chewed. Skipping the shim step means you’ll hear that grind again before the year is out.
• Linear battery backup units (the APeX series) that beep constantly but still hold a charge. That beeping is the charger board, not the battery. The factory charger on older Linear APeX units has a known habit of throwing a fault code even when the battery tests fine. We test the actual voltage under load before we sell you a $200 battery. Half the time the battery is good and it’s a $40 charger module.
• Linear photo eyes crusted over with Prosper dust and pollen. If your gate reverses for no reason, the first thing to check is the photo eyes. Linear photo eyes are reliable, but they sit low where mower clippings, dust from the clay, and spring pollen collect. A clean and realign fixes most of these in ten minutes. When it doesn’t, we check the wiring before we blame the board. That’s the order a repair-first shop works in.

Our Linear Gate Motor & Opener Process

Here’s how a Linear job goes at Gatewood Fence & Gate, start to finish.

1. 1
   You call. A live person answers, day or night. You describe the symptom. We ask about the model if you know it, and we set a window. Hal shows up when he said he would. He’ll call before he pulls up so you’re not standing in the driveway guessing.
2. 2
   Diagnosis on site. We test the board, the limits, the photo eyes, the motor draw, and the gate itself. Most Linear failures are the gate fighting the opener, not the opener failing on its own. We find the actual root cause, not the most expensive symptom.
3. 3
   Parts decision, explained plainly. If a part is bad we tell you what it costs for OEM Linear and what a quality aftermarket equivalent runs. We don’t push aftermarket to pad the margin, and we don’t push OEM when aftermarket is genuinely fine. You decide with real numbers in front of you.
4. 4
   The repair, done in your driveway. We weld on site if the gate itself needs work. Linear motors bolt to the gate or the pad. We don’t haul anything off unless it’s truly dead beyond repair, and we’ll show you why before we do.
5. 5
   Testing under real conditions. We cycle the gate ten or fifteen times. We test the auto-close, the photo eyes, the battery backup if you have one, and every remote you own. If it’s going to fail, we want it to fail in front of us, not at 6 a.m. when you’re trying to get to work.
6. 6
   The 90-Day Done Right Promise, in writing. If something’s not right, you call and we come back. No runaround. No “well, that’s a different issue.” If it’s our work, we stand behind it.

What Linear Gate Motor & Opener Costs in Prosper

Here are honest numbers for the Linear jobs we see most in Prosper. These are ranges, not quotes. Your exact price depends on your gate, your model, and what we find when we open things up. You’ll get a firm number before we start, and it won’t change at the end.

• Remote reprogramming or sync: $25-$60
• Photo eye cleaning, realignment, or replacement: $75-$180
• Limit switch adjustment or replacement: $90-$220
• Control board relay repair: $120-$260
• Full control board replacement (Linear APeX or L-Series): $280-$520
• Gearbox rebuild on an SL-series slide motor: $300-$550
• Complete Linear motor replacement installed: $850-$1,700 depending on model and gate size

What moves the price is the gate as much as the motor. A 16-foot iron swing gate that’s sagging will cost more to fix properly than a light tube gate on good hinges. That’s just honest. We price the job, not the neighborhood. Estimates are free, and there’s no trip charge inside the county. Call (979) 291-0947 and we’ll give you a straight number.

Why Prosper Homeowners Call Gatewood Fence & Gate for Linear Work

We’ve been fixing gates in and around Prosper since 2001, back when this area was mostly pasture and you waved at every truck that passed. Hal Gatewood learned the trade at Collin College over in McKinney, welding and construction technology, and he’s been elbow-deep in gate motors ever since. When we show up for a Linear opener, we’re not reading a manual for the first time. We’ve been inside these units for two decades.

Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No dispatch queue, no ticket number. We also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if you’ve got mixed brands on different gates we can handle the whole property in one trip. Calls answered by a live person, 24/7. That’s the whole promise and we keep it.

FAQs