Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterBFT Gate Parts & Welding in Prosper: What to Know First
We provide independent BFT gate parts and on-site welding in Prosper, and most hinge, post, and rail repairs are done in a single visit. You’ll know the price before we start, because we quote it up front and write it down. If you own a BFT gate that’s sagging, dragging, or making noise, call (979) 291-0947 and Hal will walk you through what he thinks is going on before he ever backs a truck out of the shop.
This page is for homeowners in Prosper who bought a BFT swing or slide gate and now need parts that actually fit and welds that hold. Not every gate company keeps BFT hardware on hand or knows which BFT series you can field-weld without voiding what’s left of your warranty. We do. We have been fixing gates since 2001, and BFT is one of the nine brands we are certified to service.
How BFT Products Fail, and How We Fix Them
- BFT Deimos swing gate operators pulling hinge posts loose in heavy clay soil. Prosper sits on expansive clay, the kind that swells after a spring rain and shrinks in August. A BFT Deimos opener is strong enough to work a gate leaf that a cheap opener would stall on, which means it will tear a shallow hinge post right out of the ground instead of stopping. We cut the post free, weld on a longer steel post base, set it deeper with concrete, and re-hang the leaf so the opener isn’t fighting the hinges anymore.
- BFT Botticelli and Rigel slide gate rollers grinding to a halt. These are common slide gate lines around Prosper, and their nylon rollers eat dirt fast if the track wasn’t laid with proper drainage. When a roller seizes, the BFT rack gear takes the abuse and you’ll hear a rhythmic clack as the gate moves. We replace the rollers with sealed-bearing steel units and often weld a small mud dam ahead of the track so the same problem doesn’t come back in six months.
- BFT Phobos actuator arms with cracked weld joints at the mounting bracket. This is one we see after another company installed the arm at a bad angle. The BFT Phobos arm is long and puts real torque on the bracket. When the bracket flexes each cycle, the weld at the base eventually cracks and the arm sags. We cut the old bracket off, weld on a thicker plate, and square the arm so the force runs straight through the bracket, not across the weld toe.
- BFT stop plates shearing bolts on heavy ornamental gates. On a big custom steel gate, the factory stop plate bolts are often the first thing to let go. You’ll notice the gate overshooting its close point and then the motor hunting. We weld the stop plate directly to the post or plate rail rather than relying on zinc bolts, which is a repair BFT won’t mention in their manual because they assume a lightweight installation.
- BFT keypads and photocells failing because connectors corroded. More of an electrical issue, but we bring it up because welding on a gate panel while the BFT controller is still powered is a great way to pickle the board. Before any on-site welding, we disconnect the operator’s power leads and isolate the control board. We’ve replaced enough BFT boards on other people’s sloppy work to know that taking five minutes to protect the electronics saves you a $400 part.
Our BFT Gate Parts & Welding Process
- 1
You call, Hal or one of his crew answers. Not a voicemail. We talk through what the gate is doing, what you’ve seen, and what it sounded like when it started. That usually tells us which parts to bring.
- 2
We come out and look at the whole gate, not just the broken piece. A BFT gate that bent a hinge almost always has a post leaning or an opener torque setting that’s too high. We check the operator settings while we’re there.
- 3
We write the price down before any work starts. If we can save your existing hinge or post by welding instead of replacing, that’s what we recommend, and the quote reflects it.
- 4
We do the work in your driveway. Welding, hinge replacement, post replacement, rail straightening, roller swaps, latch alignment. The gate stays on your property the whole time.
- 5
We test the gate through full cycles with the BFT opener running. A weld can look good and still throw off the gate’s travel. We run it open and closed several times and dial in the limits so the motor isn’t fighting the new geometry.
- 6
You get the 90-Day Done Right Promise in writing. If something about our repair isn’t right, you call and we come back. No runaround. Hal Gatewood’s name is on the invoice.
What BFT Gate Parts & Welding Costs in Prosper
For a BFT gate repair in Prosper, you’re usually looking at $150 to $550 depending on what let go. A hinge replacement on a standard tubular steel drive gate runs about $180 to $320. Replacing and re-welding a steel post that’s been pulled out of plumb runs $300 to $600, which includes cutting the old post out and setting the new one in concrete. Slide gate roller replacement, including the steel bracket and track cleanup, runs $180 to $380. Custom welding, like building up a worn hinge pin or reinforcing a cracked rail, is quoted by the hour at $95 to $140 per hour plus materials, and we tell you up front how long we think it’ll take.
What moves the price: how deep the post is set, whether the gate is ornamental steel or light aluminum, and whether the BFT operator needs its limits reprogrammed after the repair. Nothing is done without your sign-off on the price. Call (979) 291-0947 and we’ll give you a straight quote.
Why Prosper Homeowners Call Gatewood Fence & Gate for BFT Work
We’ve been fixing gates around here since 2001, when this part of Collin County was mostly pasture and everyone knew everyone at the Kroger on Preston Road. Hal Gatewood picked up welding and construction technology at Collin College over in McKinney and has been on gate jobs in Prosper, Gentle Creek, and the surrounding neighborhoods ever since. When you hire us for BFT work, you get a person whose name is on the shop and on every invoice. The 90-Day Done Right Promise is written on every job. If we service your BFT operator and later you need work on a LiftMaster, Mighty Mule, Ghost Controls, or DoorKing opener, same crew, same guarantee. As an independent BFT service provider, we’re not tied to a manufacturer’s script, we’re tied to your gate working right.
FAQs
It depends on the part and what’s failing. For BFT controller boards, gear motors, and safety photocells, we use genuine BFT OEM parts because aftermarket electronics on these operators are a gamble. For structural pieces like hinges, post brackets, rollers, and steel rails, we weld and fabricate using materials that match or beat the original spec. We’ll tell you which is which and why before you spend a dime.
If the gate or opener is still under factory warranty, welding near the operator can void the electronics coverage if the control board gets damaged. We isolate the board and disconnect power before any weld work, which protects the warranty on the operator itself. For structural components like posts and hinges, welding is generally outside the manufacturer’s warranty scope anyway. Call us at (979) 291-0947 and we’ll tell you what your specific BFT model’s warranty actually covers.
We keep the most common BFT repair parts in the shop, including hinge sets, roller brackets, stop plates, and limit switch components for the Deimos, Botticelli, Rigel, and Phobos lines common in Prosper. If your job needs a BFT-specific board or gear motor we don’t stock, our supplier runs parts to us quickly, usually within one to two business days. We’ll tell you the honest lead time before we order anything.
For hinge, post, rail, roller, and welding repairs, we can usually get to you the same or next day if you’re in Prosper. Emergency calls come in around the clock because a stuck-open gate on a property with kids or livestock can’t wait until Monday. Call (979) 291-0947 and you’ll get a live person who can tell you when we’ll be there, not a recorded message promising a callback.
Rarely. Most BFT openers from the last ten to fifteen years are worth repairing if the motor is still good. The failure is usually a hinge, a post, a roller, or a limit switch, not the operator itself. We’ll tell you straight if the opener is shot, but we’ve saved plenty of BFT systems in Prosper that other outfits wanted to tear out and swap. That’s the repair-first difference: Hal fixes what’s broken and leaves alone what isn’t.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Prosper and nearby areas.