Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWeld & Rust Repair in Prosper, TX
Weld and rust repair for residential gates in Prosper, TX typically costs between $150 and $450 depending on the severity of the corrosion and whether we are fixing a hinge plate, a structural cross-member, or a gate post. At Gatewood Fence & Gate, I focus on saving what you already have rather than pushing for a full replacement, which is why we offer on-site welding services that keep your gate where it belongs. If your gate is sagging, dragging, or showing signs of structural failure, our Gate Repair services can help-call us at (979) 291-0947 to get an honest assessment.
I have been in this business since 2001, and I have seen too many companies tell homeowners that a rusted hinge or a cracked weld means the entire gate needs to be scrapped. That is rarely the truth. If the main structure of your gate is sound, fixing the damage is a straightforward process that restores the security of your property. We handle this work with the same care I would use on my own home, and every repair is backed by our 90-Day Done Right Promise. If you are looking for help with your gate, you can always visit our home page to see everything we do, or specifically look at our Gate Repair in Prosper page for a broader look at our services.
When You Need Weld & Rust Repair
Living in Prosper, TX means dealing with heat cycles and soil movement that put constant stress on metal gates. The clay soil here shifts throughout the year, which causes gate posts to settle and puts immense pressure on your hinges and welds. When the metal starts to fail, Electric Gate Repair may be needed, as it is not just an inconvenience. It is a security risk. Here are the signs that you need a professional to look at your gate:
- The Gate Is Sagging: If your gate is dragging on the driveway or failing to latch correctly, the hinge welds are likely failing. The gate is pulling the metal away from the post, and it will only get worse until it is reinforced.
- Visible Rust Pitting: Surface rust is one thing, but if you can poke a screwdriver into the metal and it crumbles, you have structural rust. We need to grind that back to clean steel and weld on new material before it compromises the whole frame.
- Broken Latch Points: If your latch no longer lines up, the gate might be leaning, or the metal around the latch assembly might be cracked or rusted through. This is a common issue with older gates that have been exposed to the elements for years.
- Wheel Assembly Detachment: For rolling gates, if the wheel assembly is no longer sitting flat or the bracket has torn away from the frame, the gate will stop rolling smoothly. This puts extra strain on your motor, whether you are running a brand like Viking or BFT.
- Cracked Cross-Members: If you see a hairline crack in the horizontal bars of your gate, that is a sign of metal fatigue. It usually happens where the gate meets the hinge post, and it requires immediate reinforcement to prevent the gate from collapsing.
Our Weld & Rust Repair Process
I do not believe in temporary patches. When I come out to your property, my goal is to make the repair last for years, not weeks. We bring the welding shop to your driveway, which means we do not have to haul your gate away or leave your property unsecure. Here is how we handle a typical repair job:
- Structural Inspection: I start by looking at the entire gate frame, not just the spot where the rust is visible. A gate sags in the hinge post, not in the middle, and that is where we usually find the root cause of the failure.
- Grinding to Bare Metal: You cannot weld over rust or paint. We grind the affected area back to clean, bare steel to ensure the new weld bonds perfectly to the existing structure.
- Reinforcement: If the metal is too thin to hold a weld, we do not just patch it. We add steel plating or gussets to reinforce the joint, ensuring the repair is stronger than the original factory connection.
- Corrosion Protection: Once the weld is finished, we treat the area with a high-quality primer and paint to seal the metal from the Prosper humidity and stop the rust from coming back.
- Final Alignment: Before we leave, we test the gate to ensure it swings or slides perfectly, latches every time, and operates smoothly with your opener system, whether you have a FAAC or Linear unit.
Because I am the one doing the work, and my name is on the shop, you get the accountability that comes with a local, owner-operated business. If there is an issue, you call me, and I fix it. That is the 90-Day Done Right Promise.
Weld & Rust Repair Pricing in Prosper
I believe in upfront pricing. You should never have to guess what a repair will cost when the technician arrives at your door. We do not have trip charges inside the county, and we offer a free second opinion on any written estimate you have already received. While every gate is different, here is what you can generally expect for repair costs in the Prosper market:
| Service Type | Estimated Cost Range |
|---|---|
| Simple Hinge/Latch Weld | $150 – $250 |
| Structural Cross-Member Repair | $250 – $450 |
| Gate Post Reinforcement/Patch | $300 – $500 |
| Complete Wheel Bracket Re-weld | $200 – $350 |
If you have a repair that costs over $200, we take $40 off the final bill. We also have a permanent 10% discount for seniors and veterans. These offers do not require haggling; they are just part of how we do business. Call (979) 291-0947 to get an exact quote for your specific gate.
FAQs - Weld & Rust Repair
Is it cheaper to repair or replace my gate?
Repairing your gate is almost always cheaper than replacing the entire unit, provided the structural frame has not completely collapsed. Most gates made of steel can be saved with proper welding and reinforcement, even if they look like they are in bad shape. Call (979) 291-0947 for a free estimate, and I will give you an honest answer on whether your gate is worth saving.
Can you fix my gate today?
We do our best to provide same-day or next-day service, especially for gates that are stuck or posing a security risk to your home. Because I am locally based and owner-operated, I do not have to wait for a dispatch center to clear my schedule. Call us, and we will see what we can do to get out to your property in Prosper as soon as possible.
How do I know if the rust is dangerous?
If you see large flakes of rust or holes in the metal, it is likely compromising the structural integrity of your gate. Gates are heavy, and if a hinge or support beam fails, the gate can fall, which is a major safety hazard for pets, children, and vehicles. If you are worried about the safety of your gate, keep it closed, lock it in place, and call a professional to assess the damage before you try to operate it again.
Do you work on all gate brands?
Yes, we are certified to service nine major gate brands, including FAAC, BFT, Linear, Viking, and others. While the welding part of the job is about the metal, the gate opener and the way the gate moves are specific to the brand, and we know how to handle the integration between the steel structure and the motor system. If your gate is not opening or closing correctly due to a mechanical issue, our Automatic Gate Repair team can fix that too.
Safety Note: Please remember that gate systems, especially those with high-tension springs or heavy steel panels, can be dangerous. If your gate is hanging by a thread or the cables are frayed, do not attempt to force it open or closed. The weight of a typical driveway gate is enough to cause serious injury. Let a trained professional handle the heavy lifting and the high-tension components.
If you are ready to get your gate back in working order, call (979) 291-0947. A live person answers our phone 24 hours a day, 7 days a week, because I know that a broken gate does not wait for business hours. We will get someone out to your property, give you a fair price, and get the job done right the first time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Prosper.