Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Elite Keypad & Intercom Repair: The Prosper Owner’s Guide
We repair and replace Elite keypad and intercom parts on gates throughout Prosper, and we keep the most common Elite-compatible components on the truck. A typical keypad or intercom board swap runs $180 to $420 installed, depending on the model and what actually failed. Most of these repairs are done in one trip, and we quote the price before we touch anything.
Most folks in Prosper discover the problem the same way: the keypad lights up but the gate won’t move, or the intercom buzzes but nobody can hear them. Sometimes it’s the keypad membrane that’s cracked from the Texas sun. Sometimes it’s the board inside that gave up after a hard rain. Either way, you’re standing outside your own gate holding groceries, and that’s not how an Elite system is supposed to work.
Which Elite Models This Applies To
Elite makes a few distinct keypad and intercom lines, and they are not interchangeable. The SL-3000 and SL-4000 slide gate operators use a different keypad protocol than the CSW200 and CSW500 swing gate models. The intercom boards vary by generation too: older Elite systems from the mid-2000s use a two-wire analog intercom, while newer units run a four-wire digital board. You can’t swap a newer keypad onto an older board without a protocol adapter, and half the failed repair calls we run in Prosper come from somebody who tried exactly that.
Here’s how to identify what you have: open the keypad housing and look for a sticker on the back of the circuit board. Elite prints the part number there, usually starting with “EL-” followed by four or five digits. The intercom board inside the operator chassis has the same style of label. If the sticker is faded or missing, take a photo of the keypad face and the wire connections behind it and bring it by the shop or text it over. We’ll match it.
On OEM versus aftermarket: Elite OEM keypads are solid, but the price difference can be steep. We stock both OEM and quality aftermarket equivalents for most Elite models, and we’ll tell you straight which one makes sense. For keypads, aftermarket is usually fine. For intercom boards, we lean OEM because the audio quality difference is real and you don’t want to pay for labor twice.
One thing to know: Gatewood Fence & Gate is an independent service provider. We are not affiliated with Elite or any manufacturer. That means we fix what’s broken instead of pushing a whole new system.
Signs Your Elite Keypad & Intercom Repair Is Failing
- Keypad lights up, gate doesn’t move. The keypad is sending a signal, but the receiver board in the operator isn’t getting it. Usually it’s a failed relay on the board, not the keypad itself. A lot of folks replace the keypad first and still have the problem.
- Some buttons work, others don’t. The membrane under the faceplate is cracked or worn through. This is the most common failure we see in Prosper because the UV and heat here are brutal on that thin rubber layer. The fix is a new keypad face or membrane, not a new board.
- Intercom hums or crackles but no voices. That’s the classic analog board failure. Capacitors dry out over time, especially with the temperature swings we get from summer to winter, and the audio circuit goes first. A humming intercom that won’t pass voice is almost always the board.
- Gate opens on its own at random times. This one’s dangerous, and we treat it that way. A failing keypad can send phantom signals, especially after rain. If your gate opens by itself, unplug the keypad or kill power to the operator and call us. That’s a safety issue, not an annoyance.
- Keypad dead after a storm. Lightning and heavy rain are hard on Elite keypads that aren’t weather-sealed correctly. If the keypad went dark after a thunderstorm, it’s usually a fried board or a shorted wire run. We’ll test the whole circuit, not just the keypad.
Replacement Cost & What’s Included
In Prosper, a keypad membrane or faceplate replacement typically runs $180 to $260 installed. A full keypad swap with a new housing is $220 to $340. An intercom board replacement runs $280 to $420, depending on the Elite generation and whether we’re doing OEM or aftermarket. These prices include the part, the labor, testing the whole circuit, and our 90-Day Done Right Promise on the work.
What drives the range: older Elite models sometimes need a wiring update when the board is replaced, and that adds a little labor. Newer models are usually plug-and-play. If the keypad wiring was chewed by rodents or baked brittle by the sun, we’ll re-run that run, and we’ll show you exactly what we’re doing before we do it. No surprises at the door.
The price is quoted and agreed before any work starts. That’s not a bargaining position. That’s how we’ve done it since 2001.
| Elite Repair | Installed Price Range |
|---|---|
| Keypad membrane/faceplate replacement | $180 - $260 |
| Full keypad swap (new housing + board) | $220 - $340 |
| Intercom board replacement (OEM or aftermarket) | $280 - $420 |
DIY or Call Us?
You can safely check a few things: confirm the keypad has power, clear debris off the faceplate, and make sure the wire nuts behind the keypad aren’t loose or corroded. That last one fixes more keypads than people expect. If you’re comfortable with a screwdriver and the power is off, checking the wire connections is reasonable.
What I wouldn’t do yourself: opening the operator chassis to test the intercom board. Those boards carry live voltage, and if you short the wrong pins you’ll turn a $300 repair into a $1,200 one. The same goes for messing with the receiver board. If the keypad checks out and the gate still won’t move, call us at (979) 291-0947. We’ll test the whole circuit and tell you exactly what failed. The estimate is free.
FAQs
An Elite keypad in Prosper typically lasts 5 to 8 years before the sun and heat take down the membrane or the board. Keypads mounted on south-facing posts with no shade fail faster, and we see that constantly in the newer subdivisions where there’s no tree cover. Intercom boards last 8 to 12 years on average, with the audio circuit usually failing first. Call (979) 291-0947 if yours is acting up and we’ll tell you whether it’s worth repairing or replacing.
Sometimes, but it depends on what failed. A cracked membrane can often be replaced without a full keypad swap, and a corroded wire connection is a five-minute fix. A fried board usually means a new keypad or board, not a repair. We’ll open it up and show you what’s actually wrong before recommending anything, and the estimate is free.
Most Elite keypad replacements and intercom board swaps take 45 minutes to an hour and a half. If we find wiring damage, it may take longer, and we’ll tell you that before we start. We keep the most common Elite parts stocked on the truck, so we can usually handle it in one trip when the part is something we carry.
We stock the most common Elite keypad membranes, keypads, and intercom boards on the truck, plus compatible aftermarket equivalents. If your model needs something we don’t carry, we can usually have it within a few days. We also stock parts for LiftMaster, Mighty Mule, and Ghost Controls, so if your gate is a mix of brands, we can still get it working right. Call (979) 291-0947 and we’ll tell you over the phone whether we have your part on hand.
Get Your Gate Working Again
If your Elite keypad or intercom is dead, flaky, or doing something it shouldn’t, call (979) 291-0947. A live person answers, day or night, and we’ll get you on the schedule. We’ll match the right part to your Elite model, quote the price before we start, and stand behind the work with our 90-Day Done Right Promise. Hal Gatewood has been fixing gates in Prosper since 2001, and he’ll be the one making sure yours works.
Hand me your number and I’ll call you before I pull up - that way you’re not standing in the driveway waiting on me.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Prosper and nearby areas.





Before
After
Before
After
Before
After