Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Parts & Welding in Prosper: What to Know First
We’re an independent Ghost Controls service provider in Prosper, and we fix these openers every week - usually same week for most gate parts and welding jobs. Whether it’s a hinge pulling loose from a welded joint or a rail that’s twisted out of square, we repair the gate in your driveway rather than hauling it off. You’ll get a straight price before we touch the metal, and the 90-Day Done Right Promise in writing when we leave. If you own a Ghost Controls opener and the gate itself is fighting you, call (979) 291-0947 and a live person will pick up.
This page is for Prosper homeowners who want to know what’s actually wrong with their Ghost Controls gate, what it’ll cost, and whether it’s worth welding rather than replacing. Hal Gatewood has been fixing gates out here since 2001, back when most of this was still pasture.
How Ghost Controls Products Fail - and How We Fix Them
Ghost Controls makes a solid residential opener, but around Prosper we see the same handful of failures show up year after year. The opener is rarely the first thing to break - the metal around it usually goes first.
- Hinge welds cracking on the AXDP and R系列的 systems. Ghost Controls openers push and pull from the post side, which puts constant torque on the hinge line. On heavier gates, the factory hinge welds start to fatigue and crack. We grind out the old weld, re-weld the hinge, and add a gusset where the gate design allows it. That holds up better than the factory weld ever did.
- Gate sag that looks like an opener problem but isn’t. When a Ghost Controls gate sags, the opener’s limit switches start fighting the geometry. The arm binds, the opener stutters, and the homeowner thinks the motor is dying. A gate sags in the hinge post, not in the middle - and that is where we start. We check the post, re-set or re-weld the hinge, and balance the gate before we even look at the opener.
- Bent rails and broken weld joints on the gate frame. Prosper soil moves. Clay expands and contracts with rain and drought, the post shifts, and the whole gate frame takes stress it was never designed for. On a Ghost Controls install, that shows up as a cracked weld where the rail meets the picket line. We weld those joints back square, and if the post is the real problem, we tell you that straight - fixing the panel without the post means you’ll fix it twice.
- Stripped or egged-out post pivot holes. This is the one nobody expects. The pivot bolt wallows out the hole in the post over time, the gate drops a quarter inch, and the Ghost Controls arm has to lift while it swings. The opener runs hot and the gears wear fast. We weld in a bushing or build the hole back up and re-drill it so the pivot runs tight again.
- Gate rollers that crater after a few Texas summers. On sliding Ghost Controls configurations, the off-the-shelf plastic wheels wear out fast in the heat and grit. We replace them with sealed-bearing steel rollers and weld the roller bracket back to the frame where the factory welds have let go.
Show me the gate closing on its own and I’ll show you where it’s failing. Most of what we do on Ghost Controls gates comes down to the metal, the hinges, and the balance - not the circuit board.
Our Ghost Controls Gate Parts & Welding Process
Here’s how a typical Ghost Controls gate parts or welding job goes at Gatewood Fence & Gate, from your first call to the finished repair.
- 1
You call (979) 291-0947 and talk to a live person. Not voicemail. Not a call center three states away. Someone answers, takes the details, and we set a time that actually works.
- 2
Hal shows up, looks at the gate, and explains what’s wrong in plain language. You’ll hear the real cause, not a sales pitch for a new gate.
- 3
We give you a written price before any work starts. Parts decisions - OEM Ghost Controls versus quality aftermarket - are made with your budget and warranty in mind, and we explain the trade-off honestly.
- 4
We weld or replace the parts on-site. Your gate stays in your driveway. No hauling it to a shop. No swapping parts that don’t need swapping.
- 5
We test the full cycle with the Ghost Controls opener running. Swing it open. Swing it closed. Check the limits, the force settings, and the safety edges.
- 6
We hand you the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back, no runaround.
Hand me your number and I’ll call you before I pull up - that way you’re not standing in the driveway waiting on me.
What Ghost Controls Gate Parts & Welding Costs in Prosper
Here’s what Prosper homeowners can expect to pay for common Ghost Controls gate repairs. These are real ranges for our area, not national averages pulled from a chart.
| Job | Typical Price in Prosper |
|---|---|
| Single hinge replacement (welded) | $180 - $320 |
| Hinge re-weld only (no hinge replacement) | $120 - $225 |
| Post replacement with re-mounting of gate panel | $550 - $1,100 |
| Rail repair / straightening with re-weld | $200 - $450 |
| Gate roller replacement (sliding gate, pair) | $160 - $300 |
| Custom welding (per hour, includes materials) | $95 - $140 |
| Latch and lock repair or replacement | $140 - $280 |
What moves the price is mostly access and the condition of the post. If the post is rotted or leaning, that’s the bigger job, and no hinge weld will hold on a post that’s moving. We’ll always tell you if the post is the real issue before we touch a hinge. Every estimate is free, and the price we quote is the price you pay - agreed in writing before we strike an arc. Call (979) 291-0947 and we’ll give you a straight number.
Why Prosper Homeowners Call Gatewood Fence & Gate for Ghost Controls Work
Hal Gatewood has been fixing gates in and around Prosper since 2001, and the name is on the shop, the invoices, and the guarantee. We’ve worked on hundreds of Ghost Controls openers out here from Gentle Creek to the acreage east of Preston Road, and we service the other major brands too - LiftMaster, Mighty Mule, DoorKing - so we know when a Ghost Controls issue is a Ghost Controls issue and when it’s just the gate hardware underneath.
Every job comes with the 90-Day Done Right Promise, a free second opinion on any written estimate, and no trip charge inside the county. Seniors and veterans get 10% off, always. And $40 off any repair over $200. No haggling, no fine print.
Most folks out here got our number from a neighbor who watched us fix what another company said couldn’t be fixed. That’s how it works in a town this size. The name is on the shop, and the shop is down the road - that is the oldest accountability there is.
FAQs
We use both, depending on the part and what makes sense for your budget. Certain components - control boards, safety sensors, and the opener arm itself - should be OEM Ghost Controls parts so the system behaves the way it was designed. For hinges, rollers, brackets, and structural welding work, a good aftermarket part often lasts longer than the factory original because it’s built heavier for Texas conditions. We’ll explain the trade-off before you pay for anything.
Welding on the gate frame itself - the hinges, posts, rails, and structural connections - does not void a Ghost Controls warranty. The warranty covers the opener mechanism and electronics, not the gate structure. We’re an independent Ghost Controls service provider, not an authorized dealer, so we’ll give you a straight answer on what’s covered and what isn’t. Call (979) 291-0947 and we’ll walk you through it.
Most gate parts and welding calls in Prosper are seen same week - and for a gate that won’t close at all, we make room sooner because that’s a security problem, not just a convenience. A live person answers around the clock, so call (979) 291-0947 and we’ll get you on the schedule.
If the post is solid and the frame is square, welding is almost always the smarter money. A well-welded hinge or a repaired rail can outlast a brand-new gate from a big-box store, because most new gates are built thin and cheap. If the post is rotted or leaning, or the frame is rusted through in more than one spot, we’ll tell you honestly that replacement makes more sense - and we sell and install new gates too.
Yes. We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have a different brand or a mix of equipment, call (979) 291-0947 and we’ll tell you over the phone whether we can help - we usually can.
Get Your Ghost Controls Gate Fixed Right in Prosper
If your Ghost Controls gate is sagging, grinding, or refusing to close, call (979) 291-0947. You’ll get a live person, a straight diagnosis, and a written price before we touch the gate. Hal has been doing this in Prosper since 2001, and the 90-Day Done Right Promise means if it’s not right, we come back and make it right. No voicemail. No call center. Just a local shop with a name on the door.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate, serving Prosper and nearby areas.