Ghost Controls Gate Access Control Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Access Control in Prosper: What to Know First

Ghost Controls gate access control repair in Prosper typically runs $180 to $440 for most keypad, receiver, and wiring fixes, and we can usually get to you same day or next morning depending on when you call. We’re an independent Ghost Controls service provider - not factory authorized, but we’ve been inside enough of these openers to know exactly where they fail and how to fix them without replacing parts that still have life in them. If your Ghost Controls keypad won’t take the code, or the gate only opens from one remote, or the phone entry stopped talking to the board, call (979) 291-0947 and we’ll walk through it with you before we even schedule the truck.

Call (979) 291-0947

This page is for homeowners in Prosper who own a Ghost Controls opener and need the access control side working again - keypads, remotes, phone entry, card readers, video intercoms, and the smart-access add-ons. Hal Gatewood has been fixing gates around here since 2001, back when this whole area was mostly pasture and everybody knew everybody at the Kroger on Preston Road. We’ll tell you straight what’s worth fixing and what’s not, and the price is quoted and agreed before any work starts.

How Ghost Controls Products Fail - and How We Fix Them

• AXS keypad membrane wear (AXS and AXDP series): The rubber membrane keys on the AXS keypads get brittle after three or four Prosper summers. Direct sun and hundred-degree afternoons dry them out until the “3” key quits registering or the whole pad reads ghost presses. The real cause is usually UV degradation of the membrane, not the board behind it. We replace the membrane and reseal the housing rather than selling you a whole new keypad.
• Receiver range collapse on the TSS1 and TDS series: A common Prosper complaint is that remotes only work from twenty feet away, or only when you’re in the driveway at a certain angle. Nine times out of ten it’s corrosion in the antenna wire connection at the control board, not a dead receiver. We clean the contact, re-terminate, and range test before we talk about replacing anything.
• Ghost Controls Wi-Fi module dropping offline (module add-on, not base boards): The Wi-Fi bridge for the app stops talking to the opener after power flickers, which happens out here every time a storm rolls through Collin County. The opener still works from remotes, so people assume it’s a Ghost Controls server issue. It’s usually the module losing its pairing. We re-pair and, if needed, move the module to a circuit that doesn’t share with the gate motor’s inrush load.
• Keypad codes erasing themselves after a power loss: Ghost Controls boards hold codes in memory, but we’ve seen AXS and AXDP units lose stored codes when the battery dies and the panel sits unpowered for more than a few days. If you’ve had a dead battery and suddenly the keypad won’t accept your old code, that’s the failure. We reprogram and we also install a small memory keeper where the wiring allows, so it doesn’t happen again.
• Vehicle detection loop and photo sensor wiring pulled loose: On Ghost Controls installations done by handyman crews or homeowners, the loop detector and safety photo eye wires get zip-tied too tight against gate posts that move. One good wind gust in Prosper and a wire gets stretched or nicked. The gate still opens, but the safety reverse gets flaky. We find the offending run and repair it on site - which beats chasing an intermittent “gate reverses for no reason” call later.

Our Ghost Controls Gate Access Control Process

1. 1
   You call, a live person answers. Hal or one of his crew picks up - not a voicemail, not a menu tree. We ask what the gate is doing and what the access system is doing, and we’ll usually have a decent guess before we hang up.
2. 2
   We schedule a window and we keep it. We’ll come out to your place in Prosper, and if you want a heads-up, hand us your number and we’ll call you before we pull up - that way you’re not standing in the driveway waiting.
3. 3
   We diagnose the Ghost Controls unit end to end. We check the keypad, remote receiver, phone entry (if you have it), safety edges, photo sensors, and the control board. We look for what actually failed, not just what’s easiest to swap.
4. 4
   We give you the real number before we touch a thing. If it’s a keypad membrane or a re-pair job, the price is lower. If the board itself is done, we’ll say so and show you why. No surprises after the fact.
5. 5
   We fix it on site. Most Ghost Controls access control repairs are done in your driveway, same visit. We carry common OEM parts and quality boards on the truck, and if we need to order something specific, we’ll tell you the lead time honestly.
6. 6
   We test it like we have to come back for it. We run the gate through repeated cycles, resync all remotes and keypads, confirm the safety reverse works, and the job isn’t closed until everything does what it should. Every job carries our 90-Day Done Right Promise in writing - if it’s not done right, we make it right.

What Ghost Controls Gate Access Control Costs in Prosper

Here’s what we see most often in Prosper, with honest ranges. The exact price depends on your exact Ghost Controls model and what’s actually broken - we’ll quote it before any work starts.

• Keypad membrane replacement (AXS/AXDP): $180 to $280
• Remote receiver repair or reprogram: $150 to $260
• Wi-Fi module re-pair and wiring cleanup: $140 to $220
• Full control board replacement (Ghost Controls OEM): $340 to $520 installed
• Keypad code reset plus new memory keeper: $120 to $190
• Safety edge and photo sensor wiring repair: $160 to $300, depending on run length and damage

What moves the price: whether we’re replacing a board or repairing it, how old the unit is, and whether the original wiring is worth saving. Aftermarket boards exist for Ghost Controls, and they’re cheaper, but we’ll be straight - on newer units the OEM board is the better call for warranty-safe operation. On older openers, an aftermarket board can make more sense than putting a $400 factory part into an opener that’s near the end of its life. We’ll walk you through both options and let you decide. Call (979) 291-0947 for a free estimate on your specific Ghost Controls setup.

Why Prosper Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

We’ve been at this since 2001, and Hal Gatewood’s name is on the shop, the invoice, and the job - which means when your Ghost Controls keypad acts up again three months from now, the same person who fixed it the first time comes back and stands behind it. Every job carries the 90-Day Done Right Promise in writing, not as a slogan. We show up on time, and the person who shows up is background-checked, uniformed, and knows Ghost Controls well enough to tell you whether that accessory keypad is worth saving or needs to go. We also service LiftMaster, Mighty Mule, and DoorKing, so if your Ghost Controls board is truly baked and a different brand fits your setup better going forward, we can have that conversation - we just won’t push it on you. And when you call, a live person answers, any hour of any day. No voicemail, no phone tree, no “your call is important to us” recording.

FAQs