Ghost Controls Gate Installation Nationwide | Gatewood Fence & Gate

Ghost Controls Gate Installation in Prosper: What to Know First

We install, wire, and set up Ghost Controls gate openers on new and existing gates across Prosper, TX. Most jobs take a half day to a full day, depending on whether the gate itself needs welding or just the operator mounted right. We’re an independent Ghost Controls service provider, which means we call it like we see it: if the arm is bad we say so, and if the post is the real problem we tell you that before we sell you anything. Hal Gatewood has been at this since 2001, and the number is (979) 291-0947 if you want a straight answer today. Hand me your number and I’ll call you before I pull up, that way you’re not standing in the driveway waiting on me.

Call (979) 291-0947

This page is for the homeowner who already bought a Ghost Controls opener, or is about to, and wants to know what actually goes into getting it installed right in Prosper. Not the brochure version. The real one.

How Ghost Controls Products Fail - and How We Fix Them

• AXDP and AXD series armatures stripping at the hinge point. Ghost Controls makes a solid residential opener, but on heavier Prosper driveway gates the armature hinge wears oval over two or three summers. The gate starts to drift, then the arm binds mid-travel. We catch it by watching the arm under load before we ever touch a motor. The fix is usually an OEM armature replacement, not a whole new opener, and we rebalance the gate so the new arm isn’t fighting the same fight.
• Photosensor eyes mounted too close to the gate path. This is the number one Ghost Controls install mistake we see from other outfits around Prosper. The eyes get mounted where the gate’s shadow or a wind gust trips them, so the gate reverses for “no reason.” The reason is mounting location. We remount them where they actually sense a car or a kid, not a weed waving in the wind off Preston Road.
• Swing gate closers fighting Ghost Controls limit settings. If there’s an old mechanical gate closer on a swing gate, it works against the Ghost Controls ram force and soft-close logic. The opener thinks it’s hitting an obstruction and reverses. We pull the closer, set the limits properly, and the gate closes like it’s supposed to. On a Ghost Controls job, the mechanical closer comes off. That’s not an opinion, that’s how the opener was designed to run.
• Battery backup units left in the box. Ghost Controls sells a battery backup kit for a reason: Prosper gets enough spring lightning and summer brownouts to knock out gate boards. If the backup was never wired in, the first storm takes the board with it. We install the backup as part of the job, not as an add-on surprise at the end.
• Mismatched mounting brackets on double gates. Double swing gates need both leaves to close evenly. When one Ghost Controls arm mounts an inch higher than the other, the gate leaves close out of sync and the wind catches the high leaf. It looks like a Ghost Controls problem. It’s a bracket problem. We shim and remount so both arms sit level and the gate runs true.

Our Ghost Controls Gate Installation Process

1. 1
   You call, we answer. A person picks up, 24/7. We ask what gate you have, what opener you bought, and what it’s doing or not doing.
2. 2
   We come out and look. Hal’s crew shows up in the window promised, no trip charge inside the county. We check the gate first: hinges, posts, balance, swing or slide path. A gate that sags in the hinge post will kill a new Ghost Controls opener in a year. We tell you straight what we see.
3. 3
   We agree on a written price. Parts choice matters here: OEM Ghost Controls parts when it’s under warranty or the part takes constant load, quality aftermarket when it’s a bracket or a weld-on that the aftermarket makes just as well. You get one price before we start. It does not change at the door.
4. 4
   We do the work in your driveway. Welding on site if the gate needs it, mounting the Ghost Controls arm, running the low-voltage wire, setting limits and force, wiring the safety eyes and keypad. No hauling your gate to a shop.
5. 5
   We test it like we own it. Full open and close cycles, obstruction reversal test, battery backup test if installed, and we watch it run for a while. If it’s acting off, we rework it right then.
6. 6
   You get the 90-Day Done Right Promise in writing. If anything’s not right, one call brings us back. No runaround, no re-quote.

What Ghost Controls Gate Installation Costs in Prosper

Here’s what we see most often, in real dollars:

• Single swing gate, Ghost Controls opener already purchased: $350 to $650. If we’re supplying the opener, add the unit cost, which runs $380 to $750 depending on the series.
• Double swing gate with two Ghost Controls arms: $650 to $1,050 labor. The second arm is more than twice the setup time because both leaves have to be balanced and synced.
• Sliding gate, Ghost Controls slide kit or conversion: $500 to $900 labor, more if the V-track needs replacing or the post needs re-welding.
• Battery backup wiring and box install: $150 to $250, parts included.
• Wire run from the house to the gate, no underground conduit present: $5 to $8 per linear foot, depending on how much trenching and what we hit under the soil.

What moves the price is the gate itself. A heavy, sagging, or misaligned gate takes longer to make right, and we won’t skip that step just to hit a lower number. Estimates are free, and every price is agreed before any work starts. Call (979) 291-0947 and we’ll talk through your gate and your opener before we ever set a time.

Why Prosper Homeowners Call Gatewood Fence & Gate for Ghost Controls Work

Because when a Ghost Controls opener acts up, the problem is usually the gate, the post, or the wiring, not the opener. We fix the whole job, not the easy part. Hal Gatewood’s name is on the shop and on every invoice, and the shop is down the road, not three states away. If you’ve been burned by an outfit that quoted one price on the phone and handed you a different one at the door, that doesn’t happen here. Every job carries the 90-Day Done Right Promise in writing. And if Ghost Controls ever isn’t the right answer for your gate, we service the other major brands too: LiftMaster, Mighty Mule, and DoorKing. We’ll tell you which opener actually fits your gate, even if it’s not the one you already bought. Certified to service nine major gate brands, background-checked crew, and a live person answers the phone around the clock.

FAQs