Linear Gate Installation Nationwide | Gatewood Fence & Gate

Linear Gate Installation in Prosper: What to Know First

Linear gate installation in Prosper typically runs $1,600 to $4,800 depending on whether you’re putting in a swing gate, a slide gate, or a double driveway gate, and most jobs are scheduled and completed within one to two weeks. We’re an independent Linear service provider - not a manufacturer shop - and we give you a written, upfront price before any work starts, so the number we quote is the number you pay. If you own a Linear opener or are considering one for a new gate, this page walks through what actually matters: how these units behave in our North Texas climate, what fails, and what a proper installation looks like. Call (979) 291-0947 and a live person answers - that’s Hal or someone on his crew, not a recording.

Call (979) 291-0947

How Linear Products Fail - and How We Fix Them

Linear builds solid operators, but every brand has its weak spots. Here’s what we see on Linear gate jobs around Prosper, and what we do about it.

• Linear SL series slide gate operators losing limit position. The SL2000 and SL3000 models use a magnetic limit switch that drifts over time, especially with the temperature swings we get between a Prosper summer afternoon and a January morning. The gate will stop a foot short or slam into the end stop. We re-set the limits, but more importantly we inspect the limit bracket for hairline cracks - when that bracket flexes, the magnet moves and the gate forgets where it is. A new aftermarket bracket costs a few dollars, but plenty of companies replace the whole operator because they won’t take the cover off and look.
• Linear LRA residential swing arm operators chewing through the drive screws. The LRA series is common on the wrought-iron driveway gates you see in Gentle Creek and Light Farms. The factory drive screw is hardened, but if the gate is even slightly out of balance, that screw becomes a wear item rather than a component. We rebalance the gate first - hinges, post alignment, leaf weight - before replacing the screw. Skip the balance and you’ll be back in eighteen months buying another part.
• Linear APeX controllers with fried circuit boards from improper grounding. The APeX series is a workhorse, but it’s sensitive to bad grounds and power surges. We see boards fail after the gate was installed by someone who ran the ground wire to the nearest metal post rather than an actual ground rod. That’s a code issue and a failure issue. We verify the ground before powering any new Linear controller, and that alone prevents half the callbacks other installers leave behind.
• Linear photo-eye safety sensors losing alignment on shifting clay soil. Prosper sits on clay that swells and contracts like crazy through the seasons. A post set shallow will move enough that the photo eyes no longer line up, and the gate refuses to close. The fix isn’t just realigning the sensor - it’s setting the sensor mounting post below the frost line and away from the moving gate structure. We dig it out right the first time.
• Linear Mighty Mule MM series arms having their mounting brackets torn from brick columns. The Mighty Mule line under the Linear umbrella shows up on a lot of DIY installs around Prosper, and the most common failure is a bracket bolted to the face of a brick or stone column with hardware that can’t hold the load. A gate arm creates real torque, and brick veneer was never meant to hold it. We install through-brackets with backing plates, or we set a proper steel post - not just longer lag screws.

Our Linear Gate Installation Process

Every Linear job we take follows the same steps, whether it’s a single pedestrian gate or a twenty-foot double swing gate with a keypad.

1. 1
   Call and talk to a person. You call (979) 291-0947, Hal or a crew member picks up, and you tell us what you’ve got: what Linear model, what kind of gate, what it’s doing or what you’re trying to build. We’ll set a time that actually works for you.
2. 2
   On-site look at the whole gate, not just the opener. We check the posts, the hinges, the panel weight, the power situation, and the ground. If the gate isn’t right at the post level, the opener will fight it forever no matter how much you spend on the motor.
3. 3
   Written quote with a line-item breakdown. Before anything is ordered or any work starts, you get the full price on paper. OEM Linear parts where they matter - control boards, limit switches, safety sensors - and quality aftermarket hardware where the factory version is overpriced or known to fail early. We’ll tell you which is which and why.
4. 4
   The installation itself. We set or repair the posts, hang and balance the gate, run the power correctly, mount the operator, wire the accessories, and set the travel limits and force settings to match the actual gate weight. No shortcuts on the ground wire, no brackets screwed into veneer.
5. 5
   Test cycle and teach you the system. We run the gate through full cycles, test the safety reversing, and make sure the keypad and remotes work. Then we walk you through the basic settings and what to watch for.
6. 6
   Cleanup and the written guarantee. We leave the site cleaner than we found it, and you get our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back.

What Linear Gate Installation Costs in Prosper

Here’s what our customers in Prosper generally see, based on the jobs we’ve done around town:

• Single swing gate with a Linear LRA operator: $1,600 - $2,800 installed
• Double swing gate with a Linear SL or APeX system: $3,200 - $5,200 installed
• Slide gate with a Linear SL2000 operator and track: $3,800 - $6,500 installed
• Pedestrian gate with a Linear keypad access system: $1,200 - $2,400 installed
• Full access control add-ons (keypads, phone entry, intercom): $400 - $1,800 depending on options

What moves the price: gate weight and width, whether we’re setting new posts or working with existing columns, power distance from the house, and whether you want accessories like a battery backup or a phone-based entry system. You get the full quote in writing before we start, and the price doesn’t change at the door. Estimates are free. Call (979) 291-0947 and we’ll come look at your gate, measure it, and hand you a number you can hold us to.

Why Prosper Homeowners Call Gatewood Fence & Gate for Linear Work

We’ve been fixing and installing gates around Prosper since 2001, back when this whole stretch was mostly pasture and the traffic light on Preston Road felt like a big deal. Hal Gatewood’s name is on the shop, and the shop is right down the road - that’s the oldest accountability there is. When we install a Linear operator, it’s installed by someone who actually knows Linear, works on it in his driveway or on yours, and stands behind it with a written 90-Day Done Right Promise. And if a Linear system ever isn’t the right fit for your gate, we’re honest about that too - we service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing as well, so we’ll tell you what works rather than selling you what’s on the truck. We’re not a manufacturer shop. We’re just the people who get called after the other guy leaves.

FAQs