Gate Repair in McKinney - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across McKinney

Gate repair in McKinney almost always starts with one question: does your HOA need to approve the work before we touch it? In Stonebridge Ranch, Craig Ranch, Trinity Falls, and most of McKinney’s master-planned communities, the answer is yes for anything beyond a basic hinge adjustment, and we have learned that the hard way over the years. We keep architectural spec sheets on file for the big McKinney subdivisions so the gate we fix or replace matches your community’s approved ironwork, paint code, and picket spacing. If your gate is sagging, grinding, or refusing to close along Eldorado Parkway, Virginia Parkway, or anywhere in the 75070 and 75071 zips, call Hal at (979) 291-0947 and we will tell you what your HOA requires before we turn a wrench.

Call (979) 291-0947

Why Gatewood Fence & Gate Is McKinney’s Preferred Gate Repair Company

Hal Gatewood has been fixing gates since 2001, and his name is on every invoice. That matters in a city like McKinney, where homeowners who bought in the 2000s build-out are now watching their original gate operators and hinge posts fail all at once, and they are tired of calling companies that sub the work to someone they have never met. We are not a franchise and we are not a dispatch service. When you call (979) 291-0947, a live person answers, and the person who shows up at your house in McKinney is part of Hal’s crew, background-checked and uniformed, driving from our Dallas-Fort Worth office with McKinney jobs scheduled the same week.

We have repaired gates in nearly every major McKinney subdivision, from Stonebridge Ranch to Adriatica to Tucker Hill. The repeat business tells the story: our 90-Day Done Right Promise is written on every job, not buried in fine print. If a hinge we straightened drifts again or a weld we made cracks within 90 days, one call brings Hal back. No runaround. He has been doing this for 24 years and he gets genuinely annoyed when he finds sloppy work somebody else left behind. That is the standard McKinney homeowners have come to expect from us, and we would rather fix it right the first time than hear about it later.

Our Gate Repair Services in McKinney

Electric Gate Repair

McKinney’s automated gates run on operators that get worked hard, especially in neighborhoods like Craig Ranch where residents come and go through electric gates dozens of times a day. We service LiftMaster, Ghost Controls, Viking, FAAC, BFT, Linear, and DoorKing operators, and we carry common boards, remotes, and safety-edge parts on the truck so we are not ordering from a catalog after we diagnose the problem. If your gate opens but will not close, or the keypad stopped responding, we trace it to the operator, the loop detector, the photo eyes, or the wiring, and we fix what is actually broken. We do not sell you a new operator because the old one has a loose terminal.

Automatic Gate Repair

The most common automatic gate failure we see in McKinney is a loop detector that has quit sensing a car in the exit zone, which is exactly what happened on a swing gate in Stonebridge Ranch that had failed its HOA’s annual safety inspection. The gate would not reverse when a car’s wheels entered the exit zone, and the HOA flagged it. Our crew traced it to a cracked wire inside the saw-cut loop in the driveway, spliced it, sealed it, and got the gate passing inspection the same week. We also had to match the community’s required finial style before ordering the replacement hinge assembly, because the first quote we gave was rejected until we pulled the architectural spec sheet for that section. That is McKinney automatic gate repair: the mechanical work is half the job, and the HOA paperwork is the other half.

Hinge & Post Repair

McKinney sits on Blackland Prairie black clay that swells when it rains and cracks when it is dry. A gate post set in that soil will heave out of plumb within a few seasons, and when the post moves, the latch strike drifts, the gate binds mid-travel, and the auto-close sensor throws a fault. We straighten and re-set posts, replace worn hinge bearings, and weld cracked hinge barrels on site so your gate stays in your driveway instead of being hauled to some shop across town. The fix starts at the hinge post, because a gate sags in the post, not in the middle, and fixing the panel without the post means you will fix it twice.

Gate Realignment

When a McKinney gate drags on the ground or the latch will not catch without lifting the gate by hand, the frame has usually racked from post movement or a bent hinge leaf. We realign the gate on its hinges, reset the post if necessary, and adjust the latch strike and auto-close sensor so the gate closes square and latches without being kicked shut. If your gate is steel or wrought iron and it has started to bind at the hinge post, call us before the hinge tears out completely. A realignment is a couple hundred dollars; a hinge post replacement is more, and the HOA will notice either way.

We also handle Gate Repair for lock repair, weld and rust repair, and full gate replacement when the panel is beyond saving, always with the community’s architectural spec in hand before we quote a replacement.

Trusted Brands We Service in McKinney

Most McKinney gate operators are LiftMaster, Ghost Controls, or Viking, because those are what the 2000s builders put in, and we are certified to service all three plus FAAC, BFT, Linear, DoorKing, Elite, and Mighty Mule. We keep common FAAC and Linear boards, remotes, and safety edges stocked for McKinney customers specifically, because those two brands show up constantly in Craig Ranch and Stonebridge Ranch and nobody wants to wait a week for a part while their gate sits open. If your operator is older or discontinued, Hal will tell you honestly whether it is worth rebuilding or whether you should put that money toward a new unit, and the quote is always the price, agreed before we start.

Common Gate Repair Problems We See in McKinney Homes

• Post lean from Blackland Prairie clay movement: McKinney’s soil swells in the spring rains and shrinks in the summer drought, and every cycle pushes the gate post a little further out of plumb. The gate starts dragging, the latch misses, and the auto-close sensor faults out. This is the single most common call we get from McKinney homeowners.
• HOA safety inspection failures: Communities like Stonebridge Ranch and Trinity Falls run annual safety checks on automated gates, and a gate that fails the reversal test, the photo-eye test, or the loop-detector test gets flagged. We fix the issue and provide documentation the HOA management company will accept.
• Powder-coat failure on iron gates: McKinney’s summer heat regularly pushes past 100°F, and after ten to fifteen years that bakes the powder coat off iron gates, especially at the weld joints near the hinge post. Exposed steel rusts, the rust stains the driveway, and the HOA sends a notice. We grind, treat, and re-coat those joints so the gate passes the architectural review.
• Operator boards cooked by heat and power surges: North Texas thunderstorms and hundred-degree attic-mounted operator boxes are a bad combination. We see fried control boards, melted capacitors, and dead keypads all summer long across McKinney’s east side and west side alike.

Pricing for Gate Repair in McKinney, TX

We Also Serve Cities Near McKinney

Our crews run gate repair routes through McKinney and the surrounding Collin County cities every week, so if you are in Allen, Prosper, Celina, or Plano, we can usually get to you within the same week we get to our McKinney jobs. If you are reading this from a neighboring town and your gate is giving you trouble, give us a call and we will put you on the schedule for Gate Repair in McKinney and the surrounding area.

FAQs - Gate Repair in McKinney