Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across McKinney
Gate installation in McKinney runs $1,800 to $7,500 for a typical automated driveway gate, depending on size, material, and whether you need a slide or swing setup. Most jobs in McKinney take one to two days on site after your HOA approves the design. Before you pull the trigger on a gate, know this: McKinney is a city of master-planned communities, and most of them have architectural review committees that govern exactly what can go in your driveway. Gate Installation here is not a “buy it and bolt it down” trade. Call (979) 291-0947 and we’ll walk you through the approval first, then the work.
Why Gatewood Fence & Gate Is McKinney’s Preferred Gate Installation Company
We’re a locally owned, owner-operated shop that’s been at this since 2001. Hal Gatewood’s name is on the business, on the trucks, and on every invoice that leaves the shop. That’s a different kind of accountability than what you get from a company that flies a crew in from three counties away and hopes you never call back.
McKinney homeowners deal with a specific set of gate problems - McKinney - and we know them cold. The black clay soil here heaves and settles in wet-dry cycles that most gate installers never account for. The result: a swing gate that sags in six months or a slide gate that binds halfway through its travel. Our crew has pulled HOA spec sheets in Stonebridge Ranch, Craig Ranch, and Trinity Falls before quoting a single replacement panel. That’s the difference between a gate that passes inspection the first time and a gate that gets red-tagged and redone at your expense.
Every job we do in McKinney carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. No runaround, no “that’s not covered.” And because we weld on site, your gate stays in your driveway while we work. We don’t haul it off and hand it back weeks later with a bill you didn’t expect. Gate Installation in McKinney is local work, and we treat it that way.
Our Gate Installation Services in McKinney
Driveway Gate Installation
A driveway gate in McKinney is a statement piece and a security feature at the same time. We install single and double driveway gates in ornamental steel and wrought iron, powder-coated to match the finish your community already has. In neighborhoods like Stonebridge Ranch, the HOA’s architectural review committee will want to see the specification before you break ground. We keep those sheets on file, so we can quote the job accurately the first time.
Swing Gate Installation
Swing gates are the most common style in McKinney’s brick-and-stone tract homes, and they’re also the most vulnerable to this area’s clay soil. A shallow post footing will move within two wet-dry cycles, and then your latch strike is off-center and the gate won’t close clean. We set posts deeper than code requires, in concrete footings sized for the gate’s weight and travel. That’s not an upsell. It’s the only way a swing gate in McKinney survives more than a couple of seasons.
Sliding Gate Installation
Slide gates make sense for wider driveways and for properties where a swing arc isn’t practical. In McKinney, automatic slide gates on HOA-governed lots need McKinney Gate Access Control with entrapment protection: photo-eyes, edge sensors, or both, wired to a UL 325 compliant operator. We install FAAC, BFT, and Viking operators, and we run the safety check before the final walkthrough, not after a community safety inspection fails.
Pedestrian Gate Installation
A side-yard pedestrian gate doesn’t always need an operator, but it still has to match the ironwork style and finish on the rest of the property. We build pedestrian gates that match your driveway gate, or we match an existing spec if the HOA requires it. In McKinney, where the powder-coat finish on a 2005 gate looks different from the same color on a 2019 gate, we match to the existing panels on your property, not the catalog swatch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McKinney
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. When an operator fails on a McKinney gate, it’s usually one of those four names on the housing. We stock Gate Parts & Welding - McKinney for FAAC and BFT slide operators locally, which means no two-week wait for a board to ship from Georgia. If your existing operator can be repaired, Hal will tell you that before he recommends a replacement. The repair-first approach saves McKinney homeowners money, and it’s how we’ve kept our name in this business for over two decades.
Common Gate Installation Problems We See in McKinney Homes
- Skipped HOA architectural approval. Someone installs a gate with the wrong finial style or a finish that doesn’t match the community spec. The homeowner gets a violation notice, a fine, and a bill for a full redo. We pull the spec before we quote, so this doesn’t happen.
- Posts heaving on Blackland Prairie clay. McKinney’s soil expands when wet and cracks when dry. A post set at a standard depth will move. We know how deep to go here, and we set footings sized for the gate’s weight, not for the minimum code allowance.
- Missing entrapment protection. An automatic slide gate without photo-eyes or edge sensors will fail a safety inspection and leave the opener locked out. We install UL 325 compliant protection on every automatic gate we put in McKinney.
- Operators dying at the 15-20 year mark. Gates installed during McKinney’s 2000s and 2010s build-out are hitting the age where hinges, hardware, and automated operators fail together. If you’re in a neighborhood like Stonebridge Ranch where entire streets were built in the same window, you may see your neighbors facing the same problems at the same time.
Pricing for Gate Installation in McKinney, TX
The honest ranges for McKinney, no mystery pricing:
| Gate Type | Typical McKinney Price Range |
|---|---|
| Swing driveway gate, single leaf, ornamental steel | $1,800 - $3,500 |
| Double driveway swing gate, automated | $3,500 - $7,500 |
| Slide driveway gate, automated | $4,000 - $8,500 |
| Pedestrian side gate, matching ironwork | $800 - $1,800 |
| Operator only, replacement | $900 - $2,800 |
The biggest cost driver in McKinney is the HOA approval and spec matching, followed by gate size and the operator brand. A BFT slide operator costs more than a basic LiftMaster. The finish matters too: matching a 20-year-old powder-coat color that’s been sun-faded takes more work than a fresh standard color. Every quote we write is fixed before we start. You’ll see the number, we agree on it, and that’s the price. No trip charge inside the county, and we offer a free second opinion on any written estimate you’ve received from another company. Call (979) 291-0947 and we’ll come measure and give you a written number.
We Also Serve Cities Near McKinney
Our crews serve McKinney and the surrounding communities of McKinney, Allen, Prosper, Celina, and Plano. If you’re in one of those areas and need gate installation, the same team that works McKinney will handle your job. Same pricing structure, same 90-Day Done Right Promise.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in McKinney
Yes. Stonebridge Ranch and most large McKinney HOAs require architectural review committee approval before a gate goes in. The committee will look at picket spacing, finial style, finish color, and gate height. If you skip this step, you risk a fine and a demand to remove or redo the gate. We keep the spec sheets on file for the major McKinney communities and can help you submit the right paperwork before we quote the job. Call (979) 291-0947 and we’ll tell you exactly what your community requires.
Probably not. A gate that sags is almost always a post problem, not a panel problem. In McKinney, the black clay soil heaves and settles seasonally, which moves the hinge posts out of plumb. Once the post leans, the leaves don’t meet. We reset the post in a deeper concrete footing and re-hang the existing panels. The fix is usually a fraction of what new panels would cost. If a panel is genuinely rusted through or bent beyond rebuilding, we’ll tell you that too, but we don’t replace panels that don’t need replacing.
Yes. That’s one of the things that separates us from an out-of-town installer. We match picket spacing, finial style, and powder-coat color to your community’s spec sheet. In Stonebridge Ranch, the architectural review committee mandates specific details, and we’ve quoted and installed enough gates there to know what they’ll approve and what they won’t. If your HOA wants a color swatch submitted before the final coat, we handle that step too. Call (979) 291-0947 and we’ll pull the spec before we quote.
Every automatic gate in McKinney must comply with UL 325, which means photo-eye sensors, edge sensors, or both, depending on the gate type and travel. Slide gates need photo-eyes at minimum, and most communities also require an edge sensor on the leading edge. We install the full entrapment protection package on every automatic gate we put in, and we test it before we leave. A gate that fails a community safety inspection locks out the operator and creates a bigger problem than the original install.
A typical automated driveway gate in McKinney runs $3,500 to $7,500, which is slightly higher than in Allen or Plano, mostly because of the HOA spec matching and the soil conditions that require deeper post footings. The extra cost is in the foundation work, not the hardware. Call (979) 291-0947 for a written quote for your specific gate, measurements are free and the number is fixed before work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving McKinney since 2001.