Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fairview
A new driveway gate in Fairview typically runs $4,800 to $11,500 installed, depending on whether you’re replacing an existing system or building fresh from the post holes up. We’re the crew that actually answers the phone when you call, and a live person picks up at (979) 291-0947 any hour of the day. Hal Gatewood has been running this shop since 2001, and his name is on every invoice, every truck, and every job we do in Fairview.
Most Fairview homes went up between 2002 and 2015, which means the automatic gate systems installed with them are now hitting 15 to 20 years old at the same time. That’s not a coincidence, and it’s not something you saw coming. It’s just where the town is right now. We know these gates, these operators, and this soil because we’ve been under the hood on them for over two decades.
Why Gatewood Fence & Gate Is Fairview’s Preferred Gate Installation Company
Fairview isn’t a town where a sales rep from three states over shows up with a laminated price sheet and no idea what kind of soil your post is set in. Our crew drives in from the metro office, and the person who measures your gate and welds your hinges is the same person you’ll see again if anything ever shifts. That’s the whole point of the 90-Day Done Right Promise: one call brings us back, no arguing, no runaround. It’s in writing on every job.
We work on custom and semi-custom homes throughout Fairview, and we’re familiar with the gate systems original builders put in from roughly 2002 onward. Ornamental steel and wrought-iron driveway gates were standard on these lots, not upgrades. That means we’re not learning your system on the fly. We already know how it was built, how it was wired, and where it’s likely to fail first. Our Gate Installation team does the full scope: new gate fabrication, operator replacement, post resetting, and full access control. Hal’s crew is background-checked and uniformed, and we’re certified on LiftMaster, FAAC, BFT, and other major operators, which matters if you ever need warranty work.
Our Gate Installation Services in Fairview
Driveway Gate Installation
Fairview driveway gates on the larger estate lots are usually ornamental steel or wrought iron, and many were paired with underground or swing-arm LiftMaster operators when the home was built. When we install a new driveway gate in Fairview, we start at the hinge post, not the panel. A gate sags in the hinge post, not in the middle. If the post has moved from years of clay soil cycles, we reset it in a deeper pour before we hang anything on it. That’s the difference between a gate that swings true for 15 years and one that binds within two seasons.
Pedestrian Gate Installation
A pedestrian gate in Fairview is often an afterthought, and it shows. Half the walk gates we see were hung on a shallow post with a cheap latch, and the first ice storm or dry summer finished the job. We set pedestrian gate posts to the same standard we use for driveway gates: below the freeze line, in a footing sized for the soil, with a latch and closer that won’t fight you. Heritage Ranch residents in particular call us for walk gates that are easy to operate from a seated position, with latches and keypads that don’t require reaching or pinching.
Sliding Gate Installation
Sliding gates in Fairview need a level track and a solid foundation, and Houston Black clay doesn’t make that easy. The soil swells when it’s wet and shrinks when it’s dry, which can lift a track or shift a ground-mounted operator enough to bind the gate. We check the run of the track with a level, shim and re-anchor where the slab has moved, and set slide gates with operator mounts that tolerate some minor ground movement. On new slide gate installs we use V-track or cantilever systems where the existing driveway or pad can’t be re-poured cheaply.
Swing Gate Installation
Swing gates are the most common style on Fairview’s custom lots, and they’re the ones we see fail most often when the hinge post leans even a fraction of an inch. A double swing gate with one side dragging tells you the post has moved, not that the gate is worn out. We set swing gate posts in a deeper concrete footing, use adjustable hinges so you can true the gate after a dry summer, and install operators with slow-start and slow-stop settings that protect the motor and the welds from shock loading.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fairview
We’re certified to install and service nine major gate brands, and for Fairview specifically we stock common parts for LiftMaster, FAAC, Mighty Mule, and BFT. That means when your operator board from the mid-2000s finally gives out, we usually don’t have to order it in and come back next week. We can often have your gate running same day. The original operator on a 2006 custom Fairview home was almost always one of those three or four brands, so we keep the boards, arms, receivers, and remotes local customers actually need.
Common Gate Installation Problems We See in Fairview Homes
- Clay soil heaving under posts. Fairview sits on Houston Black clay that expands and contracts with every wet winter and dry summer. A post set in a shallow footing will move within a few seasons, binding the gate and burning out the operator motor. We reset posts in deeper pours, sometimes adding rebar and gravel drainage to slow the cycles.
- Control boards without battery backup. Most original gate systems from the 2002-2015 era in Fairview have no battery backup. When the February 2021 ice storm knocked out line power, plenty of residents in Heritage Ranch were stuck in or out until the operator manually released. New installs always get a battery backup option, and we retrofit older boards where it’s possible.
- Keypads and remotes built for someone else. Factory-default keypad heights assume a standing, able-bodied user. On a large share of Fairview calls, especially in the 55+ communities, we lower keypads for seated reach, set opener cycles to a slower speed, and pair remotes with larger buttons. This matters more than most people expect.
- Sagging double gates from worn hinge pins. A double driveway gate that droops on one side is usually a hinge pin or barrel worn beyond adjustment, sometimes both. Fix the panel without the post and you’ll fix it twice. We weld new hinge barrels on site where the steel is sound and replace the whole hinge assembly where it isn’t.
Pricing for Gate Installation in Fairview, TX
A straightforward single swing gate with a new operator on an existing, sound post runs $4,800 to $7,200 in Fairview. A double driveway gate with two operators, new posts, and battery backup typically lands $7,500 to $11,500 depending on panel width and ornamentation. Sliding gates on a new cantilever track start around $6,500 and climb with the gate length and finish. Pedestrian gate installs with a keypad usually run $1,800 to $3,200. Every one of those numbers is quoted and agreed before we ever put a shovel in the ground. We don’t show up with a different number than the one you approved.
We Also Serve Cities Near Fairview
We work throughout Collin County. If you’re in Prosper, Plano, Allen, or Frisco and need gate work done, you’re inside our normal service area and we’ll treat you the same way we treat Fairview neighbors. You can read more about how we approach this work on our Gate Installation in Fairview page, or just call the shop and talk to a live person.
Serving Fairview, TX - Our Local Coverage Area
We’re based in the Fairview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fairview
Fairview’s Houston Black clay expands and contracts far more than most concrete footings can resist when they’re poured shallow. The original builder’s footing on a mid-2000s Fairview home is often only 24 to 30 inches deep, which is above the zone where soil moisture swings hardest. We reset the post in a deeper pour, sometimes 36 to 42 inches, with rebar and gravel at the base so water drains away instead of sitting against the concrete. Call (979) 291-0947 and we’ll look at the post before you spend money on a new gate.
Yes, but only if a battery backup is wired into the operator, and most original Heritage Ranch installs don’t have one. When line power drops, a non-backed-up gate defaults to manual release, which means getting out of your car in an ice storm to shove a heavy gate open. We install battery backup kits on existing LiftMaster and FAAC operators and include them standard on new installs. If your gate lost power in February 2021, you already know why this matters. Call us for a quote; estimates are free.
On a 2006-era swing gate operator in Fairview, replacement is almost always the better call unless the failure is just a capacitor or a control board fuse. The original operators from that building era are now 15 to 20 years old, past their manufacturer-rated service life, and they lack modern features like battery backup, slow-start ramping, and entrapment protection improvements. We’ll give you a straight answer on whether the fix is worth the money, and we won’t push a replacement you don’t need. A $40 discount applies to any repair over $200 if repair is the right call.
Yes. We set keypads and call buttons at seated reach height, typically 42 to 48 inches from finished grade, on every install where the resident needs it, and we position them so the user doesn’t have to lean out of a vehicle to reach them. This comes up constantly on Fairview calls in Heritage Ranch and other 55+ neighborhoods, and it’s a standard accommodation, not an upcharge. Call (979) 291-0947 and tell us what height you need.
In most cases, yes. A sagging double gate in Fairview is usually a worn hinge pin or barrel, sometimes combined with a hinge post that has leaned from clay movement. We weld new hinge barrels on site while the gate stays in your driveway, reset the post if it’s moved, and true the gate so both leaves close and latch cleanly. We don’t haul the gate off to a shop and we don’t sell you a whole new panel when a hinge replacement is all it needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fairview and the rest of Collin County since 2001.